Publications
2024
Chlorine-Induced Stress Corrosion Cracking of Single Crystal Superalloys at 550 °C
Martinez, F. D., Dawson, K., Tatlock, G., Leggett, J., Gibson, G., Mason-Flucke, J. C., . . . Gray, S. (2024). Chlorine-Induced Stress Corrosion Cracking of Single Crystal Superalloys at 550 °C. High Temperature Corrosion of Materials, 101(5), 951-960. doi:10.1007/s11085-024-10282-7
Effects of surface hardening by laser shock peening and shot peening on a nickel-based single-crystal superalloy CMSX-4
Hakeem, A. H., Morar, N. I., Dawson, K., Tatlock, G. J., Gibson, G. J., & Gray, S. (2024). Effects of surface hardening by laser shock peening and shot peening on a nickel-based single-crystal superalloy CMSX-4. Materials Research Express, 11(7), 076527. doi:10.1088/2053-1591/ad6535
2023
Effect of NaCl and SO<sub>2</sub> on the stress corrosion cracking of CMSX-4 at 550°C
Duarte Martinez, F., Syed, A., Dawson, K., Tatlock, G. J., Morar, N. I., Kothari, M., . . . Castelluccio, G. M. (2023). Effect of NaCl and SO<sub>2</sub> on the stress corrosion cracking of CMSX-4 at 550°C. MATERIALS AT HIGH TEMPERATURES, 40(4), 283-295. doi:10.1080/09603409.2023.2205760
Environmentally assisted cracking of a single crystal nickel-based superalloy
Dawson, K., Duarte-Martinez, F., Gray, S., Nicholls, J., Gibson, G., Leggett, J., & Tatlock, G. J. (2023). Environmentally assisted cracking of a single crystal nickel-based superalloy. MATERIALS AT HIGH TEMPERATURES, 40(4), 296-307. doi:10.1080/09603409.2023.2182587
2022
Enhanced Long-Term Cathode Stability by Tuning Interfacial Nanocomposite for Intermediate Temperature Solid Oxide Fuel Cells
Hu, D., Dawson, K., Zanella, M., Manning, T. D., Daniels, L. M., Browning, N. D., . . . Rosseinsky, M. J. (2022). Enhanced Long-Term Cathode Stability by Tuning Interfacial Nanocomposite for Intermediate Temperature Solid Oxide Fuel Cells. ADVANCED MATERIALS INTERFACES, 9(14). doi:10.1002/admi.202102131
2021
A Novel Self-Assembly Strategy for the Fabrication of Nano-Hybrid Satellite Materials with Plasmonically Enhanced Catalytic Activity
Morris, G., Sorzabal-Bellido, I., Bilton, M., Dawson, K., McBride, F., Raval, R., . . . Diaz Fernandez, Y. A. (n.d.). A Novel Self-Assembly Strategy for the Fabrication of Nano-Hybrid Satellite Materials with Plasmonically Enhanced Catalytic Activity. Nanomaterials, 11(6), 1580. doi:10.3390/nano11061580
2020
Analysis of combined static load and low temperature hot corrosion induced cracking in CMSX-4 at 550 °C
Brooking, L., Gray, S., Dawson, K., Nicholls, J. R., Simms, N. J., Sumner, J., & Tatlock, G. J. (2020). Analysis of combined static load and low temperature hot corrosion induced cracking in CMSX-4 at 550 °C. CORROSION SCIENCE, 163. doi:10.1016/j.corsci.2019.108293
Microstructure and mechanical characterisation of SLM processed Haynes<sup>®</sup> 230<sup>®</sup>
Bauer, T., Dawson, K., Spierings, A. B., & Wegener, K. (2020). Microstructure and mechanical characterisation of SLM processed Haynes<sup>®</sup> 230<sup>®</sup>. In Proceedings - 26th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2015 (pp. 813-822).
Processing ODS modified IN625 using selective laser melting
Spierings, A. B., Bauer, T., Dawson, K., Colella, A., & Wegener, K. (2020). Processing ODS modified IN625 using selective laser melting. In Proceedings - 26th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2015 (pp. 803-812).
2019
Multi-Laser Powder Bed Fusion Benchmarking-Initial Trials with Inconel 625
Wong, H., Dawson, K., Ravi, G. A., Howlett, L., Jones, R. O., & Sutcliffe, C. J. (2019). Multi-Laser Powder Bed Fusion Benchmarking-Initial Trials with Inconel 625. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 105(7-8), 2891-2906. doi:10.1007/s00170-019-04417-3
Influence of annealing on the electrical characteristic of GaSbBi Schottky diodes
Cao, Z., Veal, T. D., Ashwin, M. J., Dawson, K., & Sandall, I. (2019). Influence of annealing on the electrical characteristic of GaSbBi Schottky diodes. In JOURNAL OF APPLIED PHYSICS Vol. 126. doi:10.1063/1.5108870
Ripplocations provide a new mechanism for the deformation of phyllosilicates in the lithosphere
Aslin, J., Mariani, E., Dawson, K., & Barsoum, M. (2019). Ripplocations provide a new mechanism for the deformation of phyllosilicates in the lithosphere. Nature Communications, 10. doi:10.1038/s41467-019-08587-2
Tuning HIV drug release from a nanogel-based <i>in situ</i> forming implant by changing nanogel size
Town, A. R., Taylor, J., Dawson, K., Niezabitowska, E., Elbaz, N. M., Corker, A., . . . McDonald, T. O. (2019). Tuning HIV drug release from a nanogel-based <i>in situ</i> forming implant by changing nanogel size. JOURNAL OF MATERIALS CHEMISTRY B, 7(3), 373-383. doi:10.1039/c8tb01597j
Tuning long-acting HIV drug release from a nanogel-based in situ forming implant
Town, A., Taylor, J., Dawson, K., Niezabitowska, E., Elbaz, N., Corker, A., . . . McDonald, T. (2019). Tuning long-acting HIV drug release from a nanogel-based in situ forming implant. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY Vol. 258. Retrieved from https://www.webofscience.com/
2018
Analysis of Combined Static Load and Low Temperature Hot Corrosion Induced Cracking in a Ni-Based Single Crystal Superalloy
Brooking, L., Gray, S., Dawson, K., Nicholls, J. R., Simms, N. J., Sumner, J., & Tatlock, G. J. (2018). Analysis of Combined Static Load and Low Temperature Hot Corrosion Induced Cracking in a Ni-Based Single Crystal Superalloy.
Investigation of the thermal and optical performance of a spatial light modulator with high average power picosecond laser exposure for materials processing applications
Zhu, G., Whitehead, D., Perrie, W., Allegre, O., Olle, V., Li, Q., . . . Dearden, G. (2018). Investigation of the thermal and optical performance of a spatial light modulator with high average power picosecond laser exposure for materials processing applications. Journal of Physics D: Applied Physics, 51(9). doi:10.1088/1361-6463/aaa948
Elucidation of ALD MgZnO deposition processes using low energy ion scattering
Werner, M., Roberts, J. W., Potter, R. J., Dawson, K., & Chalker, P. R. (2018). Elucidation of ALD MgZnO deposition processes using low energy ion scattering. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 36(2). doi:10.1116/1.5015958
Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition
Spierings, A. B., Dawson, K., Dumitraschkewitz, P., Pogatscher, S., & Wegener, K. (2018). Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition. ADDITIVE MANUFACTURING, 20, 173-181. doi:10.1016/j.addma.2017.12.011
Electron microscopy studies for opacified Intraocular lenses after glaucoma tube implants
Abdelmaksoud, A., Lace, R., Romani, S., Dawson, K., Williams, R., Bentley, S., . . . Bhargava, A. (2018). Electron microscopy studies for opacified Intraocular lenses after glaucoma tube implants. In INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE Vol. 59. Retrieved from https://www.webofscience.com/
Thermal and optical performance characteristics of a spatial light modulator with high average power picosecond laser exposure applied to materials processing applications
Zhu, G., Whitehead, D., Perrie, W., Allegre, O. J., Olle, V., Li, Q., . . . Dearden, G. (2018). Thermal and optical performance characteristics of a spatial light modulator with high average power picosecond laser exposure applied to materials processing applications. In 10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018] Vol. 74 (pp. 594-597). doi:10.1016/j.procir.2018.08.080
2017
Bi4O4Cu1.7Se2.7Cl0.3: an intergrowth of BiOCuSe and Bi2O2Se stabilized by the addition of a third anion
Gibson, Q. D., Dyer, M. S., Whitehead, G. F. S., Alaria, J., Pitcher, M. J., Edwards, H. J., . . . Rosseinsky, M. J. (2017). Bi4O4Cu1.7Se2.7Cl0.3: an intergrowth of BiOCuSe and Bi2O2Se stabilized by the addition of a third anion. Journal of the American Chemical Society, 139(44), 15568-15571. doi:10.1021/jacs.7b06168
Microstructure and oxide particle stability in a novel ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing
Kenel, C., Dawson, K., Barras, J., Hauser, C., Dasargyri, G., Bauer, T., . . . Wegener, K. (2017). Microstructure and oxide particle stability in a novel ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing. Intermetallics, 90, 63-73. doi:10.1016/j.intermet.2017.07.004
Enhanced Switching Stability in Ta2O5 Resistive RAM by Fluorine Doping
Sedghi, N., Li, H., Brunell, I. F., Dawson, K., Guo, Y., Potter, R. J., . . . Chalker, P. R. (2017). Enhanced Switching Stability in Ta2O5 Resistive RAM by Fluorine Doping. Applied Physics Letters, 111(9). doi:10.1063/1.4991879
Voltage Controlled Hot Carrier Injection Enables Ohmic Contacts Using Au Island Metal Films on Ge.
Ganti, S., King, P. J., Arac, E., Dawson, K., Heikkila, M. J., Quilter, J. H., . . . O'Neill, A. (2017). Voltage Controlled Hot Carrier Injection Enables Ohmic Contacts Using Au Island Metal Films on Ge. ACS APPLIED MATERIALS & INTERFACES, 9(33), 27357-27364. doi:10.1021/acsami.7b06595
Investigation of the thermal and optical performance of a spatial light modulator with 220W of picosecond laser exposure for materials processing applications (Invited)
Perrie, W., Whitehead, D., Zhu, G., Allegre, O., Olle, V., Dawson, K., . . . Dearden, G. (2017). Investigation of the thermal and optical performance of a spatial light modulator with 220W of picosecond laser exposure for materials processing applications (Invited). In Proceedings of 39th MATADOR Conference Vol. Session LMN-4, Laser Micro/Nano Fabrication 4 (pp. Paper #093). University of Manchester, Manchester, UK.
The role of nitrogen doping in ALD Ta2O5 and its influence on multilevel cell switching in RRAM
Sedghi, N., Li, H., Brunell, I. F., Dawson, K., Potter, R. J., Guo, Y., . . . Chalker, P. R. (2017). The role of nitrogen doping in ALD Ta2O5 and its influence on multilevel cell switching in RRAM. Applied Physics Letters, 110(10), 102902-1-102902-4. doi:10.1063/1.4978033
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
Spierings, A. B., Dawson, K., Heeling, T., Uggowitzer, P. J., Schaublin, R., Palm, F., & Wegener, K. (2017). Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting. MATERIALS & DESIGN, 115, 52-63. doi:10.1016/j.matdes.2016.11.040
Room Temperature Magnetically Ordered Polar Corundum GaFeO<sub>3</sub> Displaying Magnetoelectric Coupling
Niu, H., Pitcher, M. J., Corkett, A. J., Ling, S., Mandal, P., Zanella, M., . . . Rosseinsky, M. J. (2017). Room Temperature Magnetically Ordered Polar Corundum GaFeO<sub>3</sub> Displaying Magnetoelectric Coupling. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 139(4), 1520-1531. doi:10.1021/jacs.6b11128
Self-assembled dynamic perovskite composite cathodes for intermediate temperature solid oxide fuel cells
Shin, J. F., Xu, W., Zanella, M., Dawson, K., Savvin, S. N., Claridge, J. B., & Rosseinsky, M. J. (2017). Self-assembled dynamic perovskite composite cathodes for intermediate temperature solid oxide fuel cells. NATURE ENERGY, 2(03). doi:10.1038/nenergy.2016.214
High Temperature Corrosion of Low Alloy Steels ☆
Pinder, L. W., Dawson, K., Tatlock, G. J., & Mahi, F. T. (2017). High Temperature Corrosion of Low Alloy Steels ☆. In Reference Module in Materials Science and Materials Engineering. Elsevier. doi:10.1016/b978-0-12-803581-8.10308-x
2016
Wider Memory Window in Ta2O5 RRAM by Doping
Sedghi, N., Li, H., Brunell, I., Potter, R., Hall, S., Dawson, K., . . . Robertson, J. (2016). Wider Memory Window in Ta2O5 RRAM by Doping. In 47th IEEE Semiconductor Interface Specialists Conference. Catamaran Hotel, San Diego, CA.
Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel
Boegelein, T., Louvis, E., Dawson, K., Tatlock, G. J., & Jones, A. R. (2016). Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel. MATERIALS CHARACTERIZATION, 112, 30-40. doi:10.1016/j.matchar.2015.11.021
High resolution microstructural studies of the evolution of nano-scale, yttrium-rich oxides in ODS steels subjected to ball milling, selective laser melting or friction stir welding
Tatlock, G. J., Dawson, K., Boegelein, T., Moustoukas, K., & Jones, A. R. (2016). High resolution microstructural studies of the evolution of nano-scale, yttrium-rich oxides in ODS steels subjected to ball milling, selective laser melting or friction stir welding. In MATERIALS TODAY-PROCEEDINGS Vol. 3 (pp. 3086-3093). Retrieved from https://www.webofscience.com/
Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting
Spierings, A. B., Dawson, K., Voegtlin, M., Palm, F., & Uggowitzer, P. J. (2016). Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 65(1), 213-216. doi:10.1016/j.cirp.2016.04.057
2015
Role of Y-Al Oxides During Extended Recovery Process of a Ferritic ODS Alloy
Capdevila, C., Pimentel, G., Aranda, M. M., Rementeria, R., Dawson, K., Urones-Garrote, E., . . . Miller, M. K. (2015). Role of Y-Al Oxides During Extended Recovery Process of a Ferritic ODS Alloy. JOM, 67(10), 2208-2215. doi:10.1007/s11837-015-1559-5
(Invited) Vacuum Ultraviolet Photochemical Atomic Layer Deposition of Alumina and Titania Films
Chalker, P. R., Marshall, P. A., Dawson, K., Sutcliffe, C. J., Brunell, I. F., Sedghi, N., . . . Potter, R. J. (2015). (Invited) Vacuum Ultraviolet Photochemical Atomic Layer Deposition of Alumina and Titania Films. ECS Transactions, 69(7), 139-145. doi:10.1149/06907.0139ecst
Nano-Particle Precipitation in Mechanically Alloyed and Annealed Precursor Powders of Legacy PM2000 ODS Alloy
Dawson, K., Haigh, S., Tatlock, G., & Jones, A. (2015). Nano-Particle Precipitation in Mechanically Alloyed and Annealed Precursor Powders of Legacy PM2000 ODS Alloy. Journal of Nuclear Materials, 464, 200-209. doi:10.1016/j.jnucmat.2015.04.039
Recovery and recrystallisation in mechanically alloyed and annealed, legacy, FeCrAlY ODS alloy precursor powders
Dawson, K., Rao, A., Tatlock, G. J., & Jones, A. R. (2015). Recovery and recrystallisation in mechanically alloyed and annealed, legacy, FeCrAlY ODS alloy precursor powders. In 36TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE Vol. 89. doi:10.1088/1757-899X/89/1/012020
(Invited) Vacuum Ultraviolet Photochemical Atomic Layer Deposition of Alumina and Titania Films
Chalker, P. R., Marshall, P. A., Dawson, K., Sutcliffe, C. J., Brunell, I. F., Sedghi, N., . . . Potter, R. J. (2015). (Invited) Vacuum Ultraviolet Photochemical Atomic Layer Deposition of Alumina and Titania Films. ECS Meeting Abstracts, MA2015-02(26), 993. doi:10.1149/ma2015-02/26/993
Preparation of micro-foils for TEM/STEM analysis from metallic powders
Dawson, K., & Tatlock, G. J. (2015). Preparation of micro-foils for TEM/STEM analysis from metallic powders. MICRON, 74, 54-58. doi:10.1016/j.micron.2015.04.006
Morphotropic Phase Boundary in the Pb‐Free (1 − x )BiTi3/8Fe2/8Mg3/8O3–x CaTiO3 System: Tetragonal Polarization and Enhanced Electromechanical Properties
Mandal, P., Manjón-Sanz, A., Corkett, A. J., Comyn, T. P., Dawson, K., Stevenson, T., . . . Rosseinsky, M. (2015). Morphotropic Phase Boundary in the Pb‐Free (1 − x )BiTi3/8Fe2/8Mg3/8O3–x CaTiO3 System: Tetragonal Polarization and Enhanced Electromechanical Properties. Advanced Materials, 27(18), 2883-2889. doi:10.1002/adma.201405452
Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y<sub>2</sub>O<sub>3</sub> ferritic steels fabricated by spark plasma sintering
Zhang, H., Huang, Y., Ning, H., Williams, C. A., London, A. J., Dawson, K., . . . Grant, P. S. (2015). Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y<sub>2</sub>O<sub>3</sub> ferritic steels fabricated by spark plasma sintering. JOURNAL OF NUCLEAR MATERIALS, 464, 61-68. doi:10.1016/j.jnucmat.2015.04.029
Mechanical Response and Deformation Mechanisms of Ferritic Oxide Dispersion Strengthened Steel Structures Produced by Selective Laser Melting
Boegelein, T., Dryepondt, S., Pandey, A., Dawson, K., & Tatlock, G. (2015). Mechanical Response and Deformation Mechanisms of Ferritic Oxide Dispersion Strengthened Steel Structures Produced by Selective Laser Melting. Acta Materialia, 87, 201-215. doi:10.1016/j.actamat.2014.12.047
Vacuum ultraviolet photochemical selectivearea atomic layer deposition of Al2O3 dielectrics
Chalker, P. R., Marshall, P. A., Dawson, K., Brunell, I. F., Sutcliffe, C. J., & Potter, R. J. (2015). Vacuum ultraviolet photochemical selectivearea atomic layer deposition of Al2O3 dielectrics. AIP Advances, 5(1). doi:10.1063/1.4905887
2014
Friction stir welding of PM2000 ODS alloy
Dawson, K., Cater, S., Tatlock, G. J., & Stanhope, C. (2014). Friction stir welding of PM2000 ODS alloy. Materials Science and Technology, 30(13), 1685-1690. doi:10.1179/1743284714y.0000000553
Characterisation of nanosized oxides in ODM401 oxide dispersion strengthened steel
Dawson, K., & Tatlock, G. J. (2014). Characterisation of nanosized oxides in ODM401 oxide dispersion strengthened steel. Journal of Nuclear Materials, 444(1-3), 252-260. doi:10.1016/j.jnucmat.2013.10.003
Friction stir welding of PM2000 ODS alloy
Dawson, K., Cater, S., Tatlock, G. J., & Stanhope, C. (2014). Friction stir welding of PM2000 ODS alloy. MATERIALS SCIENCE AND TECHNOLOGY, 30(13B), 1685-1690. doi:10.1179/1743284714Y.0000000553
2013
Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT
Dawson, K. E., Tatlock, G. J., Chi, K., & Barnard, P. (2013). Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A(11), 5065-5080. doi:10.1007/s11661-013-1880-y
Friction stir welding of steel: A process update
Cater, S. S., Galloway, A. M., McPherson, N. A., Steel, R., Tatlock, G., & Dawson, K. (2013). Friction stir welding of steel: A process update. Welding and Cutting, 12(4), 268-276.
2012
Atomic layer deposition of germanium-doped zinc oxide films with tuneable ultraviolet emission
Chalker, P. R., Marshall, P. A., King, P. J., Dawson, K., Romani, S., Williams, P. A., . . . Rosseinsky, M. J. (2012). Atomic layer deposition of germanium-doped zinc oxide films with tuneable ultraviolet emission. JOURNAL OF MATERIALS CHEMISTRY, 22(25), 12824-12829. doi:10.1039/c2jm31391j
2011
Observations of native oxides on ion beam polished heterogeneous Cr-Mo weld TEM foil specimens
Dawson, K., & Tatlock, G. J. (2011). Observations of native oxides on ion beam polished heterogeneous Cr-Mo weld TEM foil specimens. MATERIALS AT HIGH TEMPERATURES, 28(4), 259-263. doi:10.3184/096034011X13182565389960
The Stability of Fine, Sub-Grain Microstructures Within Carbon Depleted Regions of Dissimilar Metal, Ferritic, Creep Resistant Welds
Dawson, K., & Tatlock, G. J. (2011). The Stability of Fine, Sub-Grain Microstructures Within Carbon Depleted Regions of Dissimilar Metal, Ferritic, Creep Resistant Welds. In Volume 6: Materials and Fabrication, Parts A and B (pp. 433-441). ASMEDC. doi:10.1115/pvp2011-57868
2010
High Temperature Corrosion of Low Alloy Steels
Pinder, L. W., Dawson, K., & Tatlock, G. J. (2010). High Temperature Corrosion of Low Alloy Steels. In SHREIR'S CORROSION, VOL 1: BASIC CONCEPTS, HIGH TEMPERATURE CORROSION (pp. 558-582). Retrieved from https://www.webofscience.com/
1.22 High Temperature Corrosion of Low Alloy Steels
Pinder, L. W., Dawson, K., & Tatlock, G. J. (2010). 1.22 High Temperature Corrosion of Low Alloy Steels. In Shreir's Corrosion (pp. 558-582). Elsevier. doi:10.1016/b978-044452787-5.00075-5
Undated
Dissimilar metal welds
Dawson, K. (n.d.). Dissimilar metal welds. (PhD Thesis, University of Liverpool).