Research outputs
Selected research outputs
- Graphene Oxide: An All-in-One Processing Additive for 3D Printing (Journal article - 2017)
- Printing in Three Dimensions with Graphene (Journal article - 2015)
- Complex ceramic architectures by directed assembly of ‘responsive’ particles (Journal article - 2017)
- Designing Smart Particles for the Assembly of Complex Macroscopic Structures (Journal article - 2013)
- Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks (Journal article - 2017)
- Interplay between yielding, 'recovery', and strength of yield stress fluids for direct ink writing: new insights from oscillatory rheology. (Journal article - 2024)
- 3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations (Journal article - 2024)
- Fourier-transform rheology and printability maps of complex fluids for three-dimensional printing (Journal article - 2023)
- Direct Ink Writing advances in multi-material structures for a sustainable future (Journal article - 2020)
- 3D printing with 2D colloids: designing rheology protocols to predict 'printability' of soft-materials (Journal article - 2019)
2026
Nonlinear Rheological Behavior of Polyacrylamide Solutions under Large-Amplitude Oscillatory Shear
Agrawal, R., Sharratt, W. N., Poole, R. J., & Garcia-Tunon, E. (2026). Nonlinear Rheological Behavior of Polyacrylamide Solutions under Large-Amplitude Oscillatory Shear. MACROMOLECULES. doi:10.1021/acs.macromol.5c02848
3D‐Printed Sulfur‐Derived Polymers With Controlled Architectures for Lithium‐Sulfur Batteries
Ling, B., Wang, H., Yang, P., Agrawal, R., Neale, A. R., Hardwick, L. J., . . . García‐Tuñón, E. (2026). 3D‐Printed Sulfur‐Derived Polymers With Controlled Architectures for Lithium‐Sulfur Batteries. Advanced Functional Materials. doi:10.1002/adfm.202512927
Mapping and connecting bulk rheological criteria and microstructure evolution of printable ceramic gels for direct ink writing
2025
Connecting bulk rheology, structural transitions and heterogeneous flow in Pluronic F127 micellar cubic liquid crystals using rheo-microscopy
Agrawal, R., Spicer, P. T., & Garcia-Tunon, E. (2025). Connecting bulk rheology, structural transitions and heterogeneous flow in Pluronic F127 micellar cubic liquid crystals using rheo-microscopy. JOURNAL OF COLLOID AND INTERFACE SCIENCE, 699. doi:10.1016/j.jcis.2025.138226
Advances and obstacles to unify the concept of “printability” in Ceramics Direct Ink Writing
Maillard, M., Fournier, S., García-Tuñón, E., & Courtial, E. -J. (2025). Advances and obstacles to unify the concept of “printability” in Ceramics Direct Ink Writing. Open Ceramics, 23, 100808. doi:10.1016/j.oceram.2025.100808
Refractive Index Engineering of 3D-Printing Terahertz Composite Materials
Latifi, S. M., Torkaman, P., Garcia-Tunon, E., & Yang, S. -H. (2025). Refractive Index Engineering of 3D-Printing Terahertz Composite Materials. ADVANCED MATERIALS TECHNOLOGIES, 10(14). doi:10.1002/admt.202500344
Designing yield stress fluids for advanced materials processing using derivatives of pH-responsive branched co-polymer surfactants
Jones, E. L., Luo, Z., Agrawal, R., Flynn, S., Carr, M., Sharratt, W., & Garcia-Tunon, E. (2025). Designing yield stress fluids for advanced materials processing using derivatives of pH-responsive branched co-polymer surfactants. SOFT MATTER, 21(24). doi:10.1039/d4sm01473a
Features and limitations of recent elastoviscoplastic constitutive models under Large Amplitude Oscillatory Shear (LAOS)
Agrawal, R., García-Tuñón, E., Poole, R. J., & Fonte, C. P. (2025). Features and limitations of recent elastoviscoplastic constitutive models under Large Amplitude Oscillatory Shear (LAOS). Journal of Non-Newtonian Fluid Mechanics, 338, 105407. doi:10.1016/j.jnnfm.2025.105407
2024
3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations
Ling, B., Agrawal, R., He, D., Poole, R. J., Cooper, A. I., Liu, M., & García‐Tuñón, E. (2024). 3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations. Advanced Functional Materials. doi:10.1002/adfm.202405320
Interplay between yielding, 'recovery', and strength of yield stress fluids for direct ink writing: new insights from oscillatory rheology.
Agrawal, R., & García-Tuñón, E. (2024). Interplay between yielding, 'recovery', and strength of yield stress fluids for direct ink writing: new insights from oscillatory rheology.. Soft matter. doi:10.1039/d4sm00758a
2023
Fourier-transform rheology and printability maps of complex fluids for three-dimensional printing
Garcia-Tunon, E., Agrawal, R., Ling, B., & Dennis, D. J. C. (2023). Fourier-transform rheology and printability maps of complex fluids for three-dimensional printing. PHYSICS OF FLUIDS, 35(1). doi:10.1063/5.0128658
2020
Direct Ink Writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & Garcia-Tunon, E. (2020). Direct ink writing advances in multi-material structures for a sustainable future. JOURNAL OF MATERIALS CHEMISTRY A, 8(31), 15646-15657. doi:10.1039/d0ta04181e
GO CaBER: Capillary breakup and steady-shear experiments on aqueous graphene oxide (GO) suspensions
Ng, H. C. -H., Corker, A., García-Tuñón, E., & Poole, R. J. (2020). GO CaBER: Capillary breakup and steady-shear experiments on aqueous graphene oxide (GO) suspensions. Journal of Rheology, 64(1), 81-93. doi:10.1122/1.5109016
2019
Understanding the Phase and Morphological Behavior of Dispersions of Synergistic Dual-Stimuli-Responsive Poly(N-isopropylacrylamide) Nanogels
Town, A., Niezabitowska, E., Kavanagh, J. L., Barrow, M., Kearns, V. R., García-Tuñón, E., & McDonald, T. O. (2019). Understanding the Phase and Morphological Behavior of Dispersions of Synergistic Dual-Stimuli-Responsive Poly(N-isopropylacrylamide) Nanogels. The Journal of Physical Chemistry Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 123(29), 6303-6313. doi:10.1021/acs.jpcb.9b04051
3D printing with 2D colloids: designing rheology protocols to predict 'printability' of soft-materials
Corker, A., Ng, H., Poole, R., & Garcia-Tunon, E. (2019). 3D printing with 2D colloids: designing rheology protocols to predict 'printability' of soft-materials. Soft Matter, 15(6), 1444-1456. doi:10.1039/C8SM01936C
Tuning HIV drug release from a nanogel-based <i>in situ</i> forming implant by changing nanogel size
Town, A. R., Taylor, J., Dawson, K., Niezabitowska, E., Elbaz, N. M., Corker, A., . . . McDonald, T. O. (2019). Tuning HIV drug release from a nanogel-based <i>in situ</i> forming implant by changing nanogel size. JOURNAL OF MATERIALS CHEMISTRY B, 7(3), 373-383. doi:10.1039/c8tb01597j
2018
In-situ compression and electrochemical studies of graphene foam
Chabi, S., Garcia-Tunon, E., Chen, H., Xia, Y., Saiz, E. G., Zhu, Y., . . . Li, X. (2018). In-situ compression and electrochemical studies of graphene foam. Veruscript Functional Nanomaterials, 2, 1-10. doi:10.22261/fnan.umpbgn
2017
3D Printing Bioinspired Ceramic Composites
Feilden, E., Ferraro, C., Zhang, Q., Garcia-Tunon, E., D'Elia, E., Giuliani, F., . . . Saiz, E. (2017). 3D Printing Bioinspired Ceramic Composites. SCIENTIFIC REPORTS, 7. doi:10.1038/s41598-017-14236-9
Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks
Rocha, V. G., Garcia-Tunon, E., Botas, C., Markoulidis, F., Feilden, E., D'Elia, E., . . . Saiz, E. (2017). Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks. ACS APPLIED MATERIALS & INTERFACES, 9(42), 37136-37145. doi:10.1021/acsami.7b10285
Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks
Garcia Rocha., Garcia-Tunon Blanca, E., Botas, C., Markoulidis, F., Feilden, E., D'Elia, E., . . . Saiz, E. (2017). Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks. ACS Applied Materials and Interfaces, 9(42), 37136-37145. doi:10.1021/acsami.7b10285
SiC porous structures obtained with innovative shaping technologies
Ferraro, C., Garcia-Tunon Blanca, E., Barg, S., Miranda, M., Ni, N., Bell, R., & Saiz, E. (2017). SiC porous structures obtained with innovative shaping technologies. Journal of the European Ceramic Society. doi:10.1016/j.jeurceramsoc.2017.09.048
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
Garcia-Tunon Blanca, E., Feilden, E., Zheng, H., D'Elia, E., Leong, A., & Saiz, E. (2017). Graphene Oxide: An All-in-One Processing Additive for 3D Printing. ACS Applied Materials and Interfaces, 9(38), 32977-32989. doi:10.1021/acsami.7b07717
Mechanical and biological evaluation of 3D printed 10CeTZP-Al 2 O 3 structures
Goyos-Ball, L., Garcia-Tunon, E., Fernandez-Garcia, E., Diaz, R., Fernandez, A., Prado, C., . . . Torrecillas, R. (2017). Mechanical and biological evaluation of 3D printed 10CeTZP-Al<sub>2</sub>O<sub>3</sub> structures. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 37(9), 3151-3158. doi:10.1016/j.jeurceramsoc.2017.03.012
Calcium phosphate substrates with emulsion-derived roughness: Processing, characterisation and interaction with human mesenchymal stem cells
Costa Machado, G., García-Tuñón, E., Bell, R. V., Alini, M., Saiz, E., & Peroglio, M. (2017). Calcium phosphate substrates with emulsion-derived roughness: Processing, characterisation and interaction with human mesenchymal stem cells. Journal of the European Ceramic Society. doi:10.1016/j.jeurceramsoc.2017.06.043
Complex ceramic architectures by directed assembly of ‘responsive’ particles
Garcia-Tunon, E., Machado, G. C., Schneider, M., Barg, S., Bell, R. V., & Saiz, E. (2017). Complex ceramic architectures by directed assembly of ‘responsive’ particles. Journal of the European Ceramic Society, 37(1), 199-211. doi:10.1016/j.jeurceramsoc.2016.06.050
2016
Robocasting of structural ceramic parts with hydrogel inks
Feilden, E., Blanca, E. G. -T., Giuliani, F., Saiz, E., & Vandeperre, L. (2016). Robocasting of structural ceramic parts with hydrogel inks. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 36(10), 2525-2533. doi:10.1016/j.jeurceramsoc.2016.03.001
Light and Strong SiC Networks
Ferraro, C., Garcia-Tunon, E., Rocha, V. G., Barg, S., Farinas, M. D., Gomez Alvarez-Arenas, T. E., . . . Saiz, E. (2016). Light and Strong SiC Networks. ADVANCED FUNCTIONAL MATERIALS, 26(10), 1636-1645. doi:10.1002/adfm.201504051
2015
Understanding Mechanical Response of Elastomeric Graphene Networks
Ni, N., Barg, S., Garcia-Tunon, E., Perez, F. M., Miranda, M., Lu, C., . . . Saiz, E. (2015). Understanding Mechanical Response of Elastomeric Graphene Networks. SCIENTIFIC REPORTS, 5. doi:10.1038/srep13712
An Investigation of the Mineral in Ductile and Brittle Cortical Mouse Bone
Rodriguez-Florez, N., Garcia-Tunon, E., Mukadam, Q., Saiz, E., Oldknow, K. J., Farquharson, C., . . . Shefelbine, S. J. (2015). An Investigation of the Mineral in Ductile and Brittle Cortical Mouse Bone. JOURNAL OF BONE AND MINERAL RESEARCH, 30(5), 786-795. doi:10.1002/jbmr.2414
Printing in Three Dimensions with Graphene
Garcia-Tunon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., . . . Saiz, E. (2015). Printing in Three Dimensions with Graphene. Advanced Materials, 27(10), 1688-1693. doi:10.1002/adma.201405046
A silicon carbide lollipop
Ferraro, C., Garcia-Tunon, E., & Saiz, E. (2015). A silicon carbide lollipop. MATERIALS TODAY, 18(2), 117-118. doi:10.1016/j.mattod.2015.01.020
2014
Mesoscale assembly of chemically modified graphene into complex cellular networks
Barg, S., Perez, F. M., Ni, N., Pereira, P. D. V., Maher, R. C., Garcia-Tunon, E., . . . Saiz, E. (2014). Mesoscale assembly of chemically modified graphene into complex cellular networks. NATURE COMMUNICATIONS, 5. doi:10.1038/ncomms5328
2013
A novel approach for the fabrication of carbon nanofibre/ceramic porous structures
Walter, C., Barg, S., Ni, N., Maher, R. C., Garcίa-Tuñón, E., Zaiviji Ismail, M. M., . . . Saiz, E. (2013). A novel approach for the fabrication of carbon nanofibre/ceramic porous structures. Journal of the European Ceramic Society, 33(13-14), 2365-2374. doi:10.1016/j.jeurceramsoc.2013.04.024
Designing Smart Particles for the Assembly of Complex Macroscopic Structures
Garcia-Tunon, E., Barg, S., Bell, R., Weaver, J. V. M., Walter, C., Goyos, L., & Saiz, E. (2013). Designing Smart Particles for the Assembly of Complex Macroscopic Structures. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 52(30), 7805-7808. doi:10.1002/anie.201301636
Synthesis and Optimization of the Production of Millimeter-Sized Hydroxyapatite Single Crystals by Cl<SUP>-</SUP>-OH<SUP>-</SUP> Ion Exchange
Garcia-Tunon, E., Franco, J., Eslava, S., Bhakhri, V., Saiz, E., Giuliani, F., & Guitian, F. (2013). Synthesis and Optimization of the Production of Millimeter-Sized Hydroxyapatite Single Crystals by Cl<SUP>-</SUP>-OH<SUP>-</SUP> Ion Exchange. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 96(3), 759-765. doi:10.1111/jace.12199
2012
Cl-OH ion-exchanging process in chlorapatite (Ca<sub>5</sub>(PO<sub>4</sub>)<sub>3</sub>Cl<i><sub>x</sub></i>(OH)<sub>1</sub> <sub>-</sub> <i><sub>x</sub></i>) - a deep insight
Garcia-Tunon, E., Dacuna, B., Zaragoza, G., Franco, J., & Guitian, F. (2012). Cl-OH ion-exchanging process in chlorapatite (Ca<sub>5</sub>(PO<sub>4</sub>)<sub>3</sub>Cl<i><sub>x</sub></i>(OH)<sub>1</sub> <sub>-</sub> <i><sub>x</sub></i>) - a deep insight. ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS, 68, 467-479. doi:10.1107/S0108768112019520
Cl-OH ion-exchanging process in chlorapatite (Ca5(PO4)3Cl(x)(OH)(1-x))--a deep insight.
García-Tuñón, E., Dacuña, B., Zaragoza, G., Franco, J., & Guitián, F. (2012). Cl-OH ion-exchanging process in chlorapatite (Ca5(PO4)3Cl(x)(OH)(1-x))--a deep insight.. Acta crystallographica. Section B, Structural science, 68(Pt 5), 467-479. doi:10.1107/s0108768112019520
Synthesis and characterisation of large chlorapatite single-crystals with controlled morphology and surface roughness
Garcia-Tunon, E., Couceiro, R., Franco, J., Saiz, E., & Guitian, F. (2012). Synthesis and characterisation of large chlorapatite single-crystals with controlled morphology and surface roughness. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 23(10), 2471-2482. doi:10.1007/s10856-012-4717-0
2010
Chlorapatite Conversion to Hydroxyapatite under High Temperature Hydrothermal Conditions
Garcia-Tunon, E., Franco, J., Dacuna, B., Zaragoza, G., & Guitian, F. (2010). Chlorapatite Conversion to Hydroxyapatite under High Temperature Hydrothermal Conditions. ADVANCED MATERIALS FORUM V, PT 1 AND 2, 636-637, 9-+. doi:10.4028/www.scientific.net/MSF.636-637.9
2009
Obtaining and characterization of calcium phosphate single-crystals by molten salt synthesis method
Garcia-Tunon, E., Franco, J., Dacuna, B., Zaragoza, G., & Guitian, F. (2009). Obtaining and characterization of calcium phosphate single-crystals by molten salt synthesis method. BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 48(3), 157-164. Retrieved from https://www.webofscience.com/