Photo of Prof Yuyuan Zhao

Prof Yuyuan Zhao BEng MSc DPhil FIMMM CEng

Mechanical, Materials & Aerospace Eng

    Publications

    2019

    Effect of flow regime on convective heat transfer in porous copper manufactured by lost carbonate sintering (Journal article)

    Zhao, Y., & Lu, X. (n.d.). Effect of flow regime on convective heat transfer in porous copper manufactured by lost carbonate sintering. International Journal of Heat and Fluid Flow, 80. doi:10.1016/j.ijheatfluidflow.2019.108482

    DOI: 10.1016/j.ijheatfluidflow.2019.108482

    Heat transfer performance of sintered Cu microchannels produced by a novel method (Journal article)

    Diao, K., & Zhao, Y. (2019). Heat transfer performance of sintered Cu microchannels produced by a novel method. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 139, 537-547. doi:10.1016/j.ijheatmasstransfer.2019.05.020

    DOI: 10.1016/j.ijheatmasstransfer.2019.05.020

    Hierarchical porous Cu with high surface area and fluid permeability (Journal article)

    Zhu, P., Wu, Z., & Zhao, Y. (2019). Hierarchical porous Cu with high surface area and fluid permeability. Scripta Materialia. doi:10.1016/j.scriptamat.2019.07.019

    DOI: 10.1016/j.scriptamat.2019.07.019

    Hysteretic energy dissipation in aluminium matrix syntactic foam under intermittent cyclic compression (Journal article)

    Zhang, Y., & Zhao, Y. (2019). Hysteretic energy dissipation in aluminium matrix syntactic foam under intermittent cyclic compression. Materialia, 6. doi:10.1016/j.mtla.2019.100286

    DOI: 10.1016/j.mtla.2019.100286

    Cyclic voltammetry measurements of electroactive surface area of porous nickel: Peak current and peak charge methods and diffusion layer effect (Journal article)

    Zhu, P., & Zhao, Y. (2019). Cyclic voltammetry measurements of electroactive surface area of porous nickel: Peak current and peak charge methods and diffusion layer effect. MATERIALS CHEMISTRY AND PHYSICS, 233, 60-67. doi:10.1016/j.matchemphys.2019.05.034

    DOI: 10.1016/j.matchemphys.2019.05.034

    Precipitation behavior of Cu-3.0Ni-0.72Si alloy (Journal article)

    Yi, J., Jia, Y., Zhao, Y., Xiao, Z., He, K., Wang, Q., . . . Li, Z. (2019). Precipitation behavior of Cu-3.0Ni-0.72Si alloy. ACTA MATERIALIA, 166, 261-270. doi:10.1016/j.actamat.2018.12.047

    DOI: 10.1016/j.actamat.2018.12.047

    Effect of oligocrystallinity on damping and pseudoelasticity of oligocrystalline Cu-Al-Mn shape memory foams (Journal article)

    Li, H., Yuan, B., Gao, Y., & Zhao, Y. (2019). Effect of oligocrystallinity on damping and pseudoelasticity of oligocrystalline Cu-Al-Mn shape memory foams. JOURNAL OF ALLOYS AND COMPOUNDS, 773, 940-949. doi:10.1016/j.jallcom.2018.09.206

    DOI: 10.1016/j.jallcom.2018.09.206

    2018

    Flow measurements in microporous media using micro-particle image velocimetry (Journal article)

    Lu, X., Zhao, Y., & Dennis, D. J. C. (2018). Flow measurements in microporous media using micro-particle image velocimetry. PHYSICAL REVIEW FLUIDS, 3(10). doi:10.1103/PhysRevFluids.3.104202

    DOI: 10.1103/PhysRevFluids.3.104202

    Heat transfer performance of LCS porous copper with different structural characteristics (Conference Paper)

    Diao, K., Lu, X., Wu, Z., & Zhao, Y. (2018). Heat transfer performance of LCS porous copper with different structural characteristics. In Materials Science Forum Vol. 933 MSF (pp. 380-387). doi:10.4028/www.scientific.net/MSF.933.380

    DOI: 10.4028/www.scientific.net/MSF.933.380

    Quasi-static and impact response of graded aluminium matrix syntactic foams (Conference Paper)

    Liang, C., & Zhao, Y. (2018). Quasi-static and impact response of graded aluminium matrix syntactic foams. In Materials Science Forum Vol. 933 MSF (pp. 246-255). doi:10.4028/www.scientific.net/MSF.933.246

    DOI: 10.4028/www.scientific.net/MSF.933.246

    2017

    Mass Transfer Performance of Porous Nickel Manufactured by Lost Carbonate Sintering Process (Journal article)

    Zhu, P., & Zhao, Y. (2017). Mass Transfer Performance of Porous Nickel Manufactured by Lost Carbonate Sintering Process. ADVANCED ENGINEERING MATERIALS, 19(12). doi:10.1002/adem.201700392

    DOI: 10.1002/adem.201700392

    Particle size distribution of tin powder produced by centrifugal atomisation using rotating cups (Journal article)

    Zhang, L. P., & Zhao, Y. Y. (2017). Particle size distribution of tin powder produced by centrifugal atomisation using rotating cups. POWDER TECHNOLOGY, 318, 62-67. doi:10.1016/j.powtec.2017.05.038

    DOI: 10.1016/j.powtec.2017.05.038

    Measurement of tortuosity of porous Cu using a diffusion diaphragm cell (Journal article)

    Diao, K., Zhang, L., & Zhao, Y. (2017). Measurement of tortuosity of porous Cu using a diffusion diaphragm cell. MEASUREMENT, 110, 335-338. doi:10.1016/j.measurement.2017.07.014

    DOI: 10.1016/j.measurement.2017.07.014

    Effect of thermo-mechanical treatments on corrosion behavior of Cu-15Ni-8Sn alloy in 3.5 wt% NaCl solution (Journal article)

    Zhang, Y., Xiao, Z., Zhao, Y., Li, Z., Xing, Y., & Zhou, K. (2017). Effect of thermo-mechanical treatments on corrosion behavior of Cu-15Ni-8Sn alloy in 3.5 wt% NaCl solution. MATERIALS CHEMISTRY AND PHYSICS, 199, 54-66. doi:10.1016/j.matchemphys.2017.06.041

    DOI: 10.1016/j.matchemphys.2017.06.041

    Effects of electrochemical reaction and surface morphology on electroactive surface area of porous copper manufactured by Lost Carbonate Sintering (Journal article)

    Zhu, P., & Zhao, Y. (2017). Effects of electrochemical reaction and surface morphology on electroactive surface area of porous copper manufactured by Lost Carbonate Sintering. RSC ADVANCES, 7(42), 26392-26400. doi:10.1039/c7ra04204c

    DOI: 10.1039/C7RA04204C

    Numerical Simulation of Heat Transfer in Porous Metals for Cooling Applications (Journal article)

    Gauna, E. A., & Zhao, Y. (2017). Numerical Simulation of Heat Transfer in Porous Metals for Cooling Applications. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 48(4), 1925-1932. doi:10.1007/s11663-017-0981-1

    DOI: 10.1007/s11663-017-0981-1

    2016

    Phase transformation behavior of Cu-10Ni-3Al-0.8Si alloy (Journal article)

    Shen, L., Li, Z., Zhao, Y., Wang, Y., Dong, Q., & Wang, M. (2016). Phase transformation behavior of Cu-10Ni-3Al-0.8Si alloy. MATERIALS CHEMISTRY AND PHYSICS, 173, 421-428. doi:10.1016/j.matchemphys.2016.02.033

    DOI: 10.1016/j.matchemphys.2016.02.033

    2015

    Heat Transfer Performance of Micro-Porous Copper Foams with Homogeneous and Hybrid Structures Manufactured by Lost Carbonate Sintering (Journal article)

    Baloyo, J. M., & Zhao, Y. (2015). Heat Transfer Performance of Micro-Porous Copper Foams with Homogeneous and Hybrid Structures Manufactured by Lost Carbonate Sintering. MRS Proceedings, 1779, 39-44. doi:10.1557/opl.2015.699

    DOI: 10.1557/opl.2015.699

    Specific surface areas of porous Cu manufactured by Lost Carbonate Sintering: Measurements by quantitative stereology and cyclic voltammetry (Journal article)

    Diao, K. K., Xiao, Z., & Zhao, Y. Y. (2015). Specific surface areas of porous Cu manufactured by Lost Carbonate Sintering: Measurements by quantitative stereology and cyclic voltammetry. MATERIALS CHEMISTRY AND PHYSICS, 162, 571-579. doi:10.1016/j.matchemphys.2015.06.031

    DOI: 10.1016/j.matchemphys.2015.06.031

    Hardness-strength relationships in the aluminum alloy 7010 (Journal article)

    Tiryakioglu, M., Robinson, J. S., Salazar-Guapuriche, M. A., Zhao, Y. Y., & Eason, P. D. (2015). Hardness-strength relationships in the aluminum alloy 7010. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 631, 196-200. doi:10.1016/j.msea.2015.02.049

    DOI: 10.1016/j.msea.2015.02.049

    2014

    Characterisation of Aluminium Matrix Syntactic Foams Dynamic Loading (Journal article)

    Altenaiji, M., Zhongwei, G., Cantwell, W., & Zhao, Y. Y. (2014). Characterisation of Aluminium Matrix Syntactic Foams Dynamic Loading. ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 564, 449-454. doi:10.4028/www.scientific.net/AMM.564.449

    DOI: 10.4028/www.scientific.net/AMM.564.449

    Characterisation of aluminium matrix syntactic foams under drop weight impact (Journal article)

    Altenaiji, M., Guan, Z. W., Cantwell, W. J., Zhao, Y., & Schleyer, G. K. (2014). Characterisation of aluminium matrix syntactic foams under drop weight impact. MATERIALS & DESIGN, 59, 296-302. doi:10.1016/j.matdes.2014.03.002

    DOI: 10.1016/j.matdes.2014.03.002

    The Fracture Properties of Sandwich Structures Based on a Metal Foam Core (Journal article)

    Shen, Y., Li, Y., Cantwell, W., & Zhao, Y. Y. (n.d.). The Fracture Properties of Sandwich Structures Based on a Metal Foam Core. Advanced Materials Research, 936, 2054-2062. doi:10.4028/www.scientific.net/amr.936.2054

    DOI: 10.4028/www.scientific.net/amr.936.2054

    Thermal Properties of Porous Copper Manufactured by Lost Carbonate Sintering (Journal article)

    Xiao, Z., & Zhao, Y. Y. (n.d.). Thermal Properties of Porous Copper Manufactured by Lost Carbonate Sintering. Materials Science Forum, 783-786, 1603-1608. doi:10.4028/www.scientific.net/msf.783-786.1603

    DOI: 10.4028/www.scientific.net/msf.783-786.1603

    Titanium matrix syntactic foams (Chapter)

    Xue, X., & Zhao, Y. (2014). Titanium matrix syntactic foams. In N. Gupta, & P. Rohatgi (Eds.), Metal Matrix Syntactic Foams: Processing, Microstructure, Properties and Applications (pp. 159-199). Lancaster: DEStech Publications, Inc.

    2013

    Advances in powder metallurgy (Book)

    Chang, I., & Zhao, Y. (2013). Advances in powder metallurgy. Woodhead Publishing Limited. doi:10.1533/9780857098900

    DOI: 10.1533/9780857098900

    Advances in Powder Metallurgy: Properties, Processing and Applications (Book)

    Chang, I., & Zhao, Y. (Eds.) (2013). Advances in Powder Metallurgy: Properties, Processing and Applications. Cambridge: Woodhead Publishing Ltd.

    Bending tests of porous steel manufactured by LCS (Conference Paper)

    Al Otaibi, S., & Zhao, Y. (2013). Bending tests of porous steel manufactured by LCS. In 21st Annual International Conference on Composites/Nano Engineering (pp. 27-28). Tenerife: ICCE.

    Brazilian test of aluminium matrix syntactic foams (Conference Paper)

    Lu, X., & Zhao, Y. (2013). Brazilian test of aluminium matrix syntactic foams. In 21st Annual International Conference on Composites/Nano Engineering (pp. 487-488). Tenerife: ICCE.

    Heat transfer coefficient of porous copper with homogeneous and hybrid structures in active cooling (Journal article)

    Xiao, Z., & Zhao, Y. (2013). Heat transfer coefficient of porous copper with homogeneous and hybrid structures in active cooling. JOURNAL OF MATERIALS RESEARCH, 28(17), 2545-2553. doi:10.1557/jmr.2013.190

    DOI: 10.1557/jmr.2013.190

    Porous Metallic Materials Produced by P/M Methods (Journal article)

    Zhao, Y. (n.d.). Porous Metallic Materials Produced by P/M Methods. Journal of Powder Metallurgy & Mining, 02(03). doi:10.4172/2168-9806.1000e113

    DOI: 10.4172/2168-9806.1000e113

    Surface characterization and corrosion behavior of a novel gold-imitation copper alloy with high tarnish resistance in salt spray environment (Journal article)

    Xiao, Z., Li, Z., Zhu, A., Zhao, Y., Chen, J., & Zhu, Y. (2013). Surface characterization and corrosion behavior of a novel gold-imitation copper alloy with high tarnish resistance in salt spray environment. CORROSION SCIENCE, 76, 42-51. doi:10.1016/j.corsci.2013.05.026

    DOI: 10.1016/j.corsci.2013.05.026

    2012

    Compressive failure of Al alloy matrix syntactic foams manufactured by melt infiltration (Journal article)

    Tao, X. F., & Zhao, Y. Y. (2012). Compressive failure of Al alloy matrix syntactic foams manufactured by melt infiltration. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 549, 228-232. doi:10.1016/j.msea.2012.04.047

    DOI: 10.1016/j.msea.2012.04.047

    Numerical and analytical solutions for sound propagation and absorption in porous media at high sound pressure levels (Journal article)

    Zhang, B., Chen, T., Zhao, Y., Zhang, W., & Zhu, J. (2012). Numerical and analytical solutions for sound propagation and absorption in porous media at high sound pressure levels. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 132(3), 1436-1449. doi:10.1121/1.4739439

    DOI: 10.1121/1.4739439

    2011

    An extended Mori-Tanaka model for the elastic moduli of porous materials of finite size (Journal article)

    Gong, S., Li, Z., & Zhao, Y. Y. (2011). An extended Mori-Tanaka model for the elastic moduli of porous materials of finite size. ACTA MATERIALIA, 59(17), 6820-6830. doi:10.1016/j.actamat.2011.07.041

    DOI: 10.1016/j.actamat.2011.07.041

    Characterisation of aluminium matrix syntactic foams under static and dynamic loading (Journal article)

    Altenaiji, M., Schleyer, G. K., & Zhao, Y. Y. (2011). Characterisation of aluminium matrix syntactic foams under static and dynamic loading. PERFORMANCE, PROTECTION AND STRENGTHENING OF STRUCTURES UNDER EXTREME LOADING, 82, 142-147. doi:10.4028/www.scientific.net/AMM.82.142

    DOI: 10.4028/www.scientific.net/AMM.82.142

    Fabrication, microstructure and property of cellular CuAlMn shape memory alloys produced by sintering-evaporation process (Journal article)

    Gong, S., Li, Z., Xu, G. Y., Liu, N., Zhao, Y. Y., & Liang, S. Q. (2011). Fabrication, microstructure and property of cellular CuAlMn shape memory alloys produced by sintering-evaporation process. JOURNAL OF ALLOYS AND COMPOUNDS, 509(6), 2924-2928. doi:10.1016/j.jallcom.2010.11.157

    DOI: 10.1016/j.jallcom.2010.11.157

    Metal Matrix Syntactic Foams: Manufacture, Matrix Material, Microstructure, Modulus and More (Journal article)

    Zhao, Y. (2011). Metal Matrix Syntactic Foams: Manufacture, Matrix Material, Microstructure, Modulus and More. JOM, 63(2), 35. Retrieved from http://gateway.webofknowledge.com/

    Ti Matrix Syntactic Foam Fabricated by Powder Metallurgy: Particle Breakage and Elastic Modulus (Journal article)

    Xue, X., & Zhao, Y. (2011). Ti Matrix Syntactic Foam Fabricated by Powder Metallurgy: Particle Breakage and Elastic Modulus. JOM, 63(2), 43-47. Retrieved from http://gateway.webofknowledge.com/

    2010

    MECHANICAL AND BIOLOGICAL PROPERTIES OF TITANIUM SYNTACTIC FOAMS (Conference Paper)

    Xue, X. B., Zhao, Y. Y., Kearns, V., Williams, R. L., & TMS. (2010). MECHANICAL AND BIOLOGICAL PROPERTIES OF TITANIUM SYNTACTIC FOAMS. In TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY (pp. 129-+). Retrieved from http://gateway.webofknowledge.com/

    MECHANICAL PROPERTIES OF LCS POROUS STEEL: COMPARISON BETWEEN DISSOLUTION AND DECOMPOSITION ROUTES (Conference Paper)

    Lu, M., Zhao, Y., & TMS. (2010). MECHANICAL PROPERTIES OF LCS POROUS STEEL: COMPARISON BETWEEN DISSOLUTION AND DECOMPOSITION ROUTES. In TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY (pp. 137-142). Retrieved from http://gateway.webofknowledge.com/

    2009

    Compressive behavior of Al matrix syntactic foams toughened with Al particles (Journal article)

    Tao, X. F., & Zhao, Y. Y. (2009). Compressive behavior of Al matrix syntactic foams toughened with Al particles. SCRIPTA MATERIALIA, 61(5), 461-464. doi:10.1016/j.scriptamat.2009.04.045

    DOI: 10.1016/j.scriptamat.2009.04.045

    Al matrix syntactic foam fabricated with bimodal ceramic microspheres (Journal article)

    Tao, X. F., Zhang, L. P., & Zhao, Y. Y. (2009). Al matrix syntactic foam fabricated with bimodal ceramic microspheres. MATERIALS & DESIGN, 30(7), 2732-2736. doi:10.1016/j.matdes.2008.11.005

    DOI: 10.1016/j.matdes.2008.11.005

    A high-working-temperature CuAlMnZr shape memory alloy (Journal article)

    Chen, J., Li, Z., & Zhao, Y. Y. (2009). A high-working-temperature CuAlMnZr shape memory alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 480(2), 481-484. doi:10.1016/j.jallcom.2009.01.104

    DOI: 10.1016/j.jallcom.2009.01.104

    Microstructure and properties of high-conductivity, super-high-strength Cu-8.0Ni-1.8Si-0.6Sn-0.15Mg alloy (Journal article)

    Li, Z., Pan, Z. Y., Zhao, Y. Y., Xiao, Z., & Wang, M. P. (2009). Microstructure and properties of high-conductivity, super-high-strength Cu-8.0Ni-1.8Si-0.6Sn-0.15Mg alloy. JOURNAL OF MATERIALS RESEARCH, 24(6), 2123-2129. doi:10.1557/JMR.2009.0251

    DOI: 10.1557/JMR.2009.0251

    Corrosion characteristic of Ce Al brass in comparison with As Al brass (Journal article)

    Chen, J. L., Li, Z., & Zhao, Y. Y. (2009). Corrosion characteristic of Ce Al brass in comparison with As Al brass. MATERIALS & DESIGN, 30(5), 1743-1747. doi:10.1016/j.matdes.2008.07.041

    DOI: 10.1016/j.matdes.2008.07.041

    'Indentation Tests on Al Matrix Syntactic Foams' (Conference Paper)

    Tao, X. F., Schleyer, G. K., & Zhao, Y. Y. (2009). 'Indentation Tests on Al Matrix Syntactic Foams'. In IUTAM Symposium on Mechanical Properties of Cellular Materials Vol. 12 (pp. 97-104). Cachan: Springer Netherlands.

    Acoustic absorption characteristics of an porous steel, in: Architectured Multifunctional Materials (Conference Paper)

    Lu, M., Zhao, Y. Y., Seiffert, G., & Hopkins, C. (2009). Acoustic absorption characteristics of an porous steel, in: Architectured Multifunctional Materials. In Y. Brechet, J. D. Embury, & P. R. Onck (Eds.), MRS Spring Meeting 2009 Vol. 1188 (pp. 04-7). San Francisco: MRS.

    Heat Transfer Performance of Porous Copper Fabricated by Lost Carbonate Sintering Process (Conference Paper)

    Zhang, L. P., Zhao, Y. Y., Mullen, D., & Lynn, K. (2009). Heat Transfer Performance of Porous Copper Fabricated by Lost Carbonate Sintering Process. In Y. Brechet, J. D. Embury, & P. R. Onck (Eds.), MRS Spring Meeting 2009 Vol. 1188 (pp. 4-07). San Francisco: MRS.

    Heat Transfer Performance of Porous Copper Fabricated by the Lost Carbonate Sintering Process (Conference Paper)

    Zhang, L., Mullen, D., Lynn, K., & Zhao, Y. (2009). Heat Transfer Performance of Porous Copper Fabricated by the Lost Carbonate Sintering Process. In ARCHITECTURE MULTIFUNCTIONAL MATERIALS Vol. 1188 (pp. 213-+). Retrieved from http://gateway.webofknowledge.com/

    Indentation Tests on Al Matrix Syntactic Foams (Chapter)

    Tao, X. F., Schleyer, G. K., & Zhao, Y. Y. (2009). Indentation Tests on Al Matrix Syntactic Foams. In Unknown Book (Vol. 12, pp. 97-104). doi:10.1007/978-1-4020-9404-0_11

    DOI: 10.1007/978-1-4020-9404-0_11

    Microstructure and texture of twin-roll cast Mg-3Al-1Zn-0.2Mn magnesium alloy (Journal article)

    Tang, N., Wang, M. P., Lou, H. F., Zhao, Y. Y., & Li, Z. (2009). Microstructure and texture of twin-roll cast Mg-3Al-1Zn-0.2Mn magnesium alloy. MATERIALS CHEMISTRY AND PHYSICS, 116(1), 11-15. doi:10.1016/j.matchemphys.2009.03.026

    DOI: 10.1016/j.matchemphys.2009.03.026

    Sound Absorption Characteristics of Porous Steel Manufactured by Lost Carbonate Sintering (Conference Paper)

    Lu, M., Hopkins, C., Zhao, Y., & Seiffert, G. (2009). Sound Absorption Characteristics of Porous Steel Manufactured by Lost Carbonate Sintering. In ARCHITECTURE MULTIFUNCTIONAL MATERIALS Vol. 1188 (pp. 207-+). Retrieved from http://gateway.webofknowledge.com/

    2008

    Compressive response of Al matrix syntactic foam manufactured by liquid sintering (Conference Paper)

    Tao, X., Zhang, L., & Zhao, Y. (2008). Compressive response of Al matrix syntactic foam manufactured by liquid sintering. In Materials Science and Technology Conference and Exhibition, MS and T'08 Vol. 4 (pp. 2587-2594).

    Manufacture and mechanical properties of metal matrix syntactic foams (Conference Paper)

    Zhao, Y., Tao, X., & Xue, X. (2008). Manufacture and mechanical properties of metal matrix syntactic foams. In Materials Science and Technology Conference and Exhibition, MS and T'08 Vol. 4 (pp. 2607-2615).

    Fabrication of high melting-point porous metals by lost carbonate sintering process via decomposition route (Journal article)

    Zhang, L. P., & Zhao, Y. Y. (2008). Fabrication of high melting-point porous metals by lost carbonate sintering process via decomposition route. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 222(2), 267-271. doi:10.1243/09544054JEM832

    DOI: 10.1243/09544054JEM832

    A Novel Manufacturing Method For Titanium Foam For Biomedical Applications (Conference Paper)

    Zhao, Y. Y., & Monaghan, L. E. (2008). A Novel Manufacturing Method For Titanium Foam For Biomedical Applications. In 2008 World Congress on Powder Metallurgy & Particulate Materials Vol. III (pp. 340-348). Washington, US: MPIF.

    Thermal conductivity of porous copper manufactured by the lost carbonate sintering process (Journal article)

    Thewsey, D. J., & Zhao, Y. Y. (2008). Thermal conductivity of porous copper manufactured by the lost carbonate sintering process. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 205(5), 1126-1131. doi:10.1002/pssa.200723121

    DOI: 10.1002/pssa.200723121

    2007

    Mechanical response of Al matrix syntactic foams produced by pressure infiltration casting (Journal article)

    Zhang, L. P., & Zhao, Y. Y. (2007). Mechanical response of Al matrix syntactic foams produced by pressure infiltration casting. JOURNAL OF COMPOSITE MATERIALS, 41(17), 2105-2117. doi:10.1177/0021998307074132

    DOI: 10.1177/0021998307074132

    2006

    Evaluation of the reliability of a new scheme for converting MCQ test scores to percentage marks (Conference Paper)

    Zhao, Y. (2006). Evaluation of the reliability of a new scheme for converting MCQ test scores to percentage marks. In Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006, EE 2006 (pp. 62-67).

    'Probabilistic analysis of numbers of namesakes in a large population' (Journal article)

    Yao, Q., & Zhao, Y. (2006). 'Probabilistic analysis of numbers of namesakes in a large population'. The Mathematical Scientist, 31, 69-72.

    Considerations in designing a centrifugal atomiser for metal powder production (Journal article)

    Zhao, Y. Y. (2006). Considerations in designing a centrifugal atomiser for metal powder production. MATERIALS & DESIGN, 27(9), 745-750. doi:10.1016/j.matdes.2005.01.011

    DOI: 10.1016/j.matdes.2005.01.011

    Correlation of strength with hardness and electrical conductivity for aluminium alloy 7010 (Journal article)

    Salazar-Guapuriche, M. A., Zhao, Y. Y., Pitman, A., & Greene, A. (2006). Correlation of strength with hardness and electrical conductivity for aluminium alloy 7010. ALUMINIUM ALLOYS 2006, PTS 1 AND 2, 519-521, 853-858. doi:10.4028/www.scientific.net/MSF.519-521.853

    DOI: 10.4028/www.scientific.net/MSF.519-521.853

    Eddy current measurements of electrical conductivity and magnetic permeability of porous metals (Journal article)

    Ma, X., Peyton, A. J., & Zhao, Y. Y. (2006). Eddy current measurements of electrical conductivity and magnetic permeability of porous metals. NDT & E INTERNATIONAL, 39(7), 562-568. doi:10.1016/j.ndteint.2006.03.008

    DOI: 10.1016/j.ndteint.2006.03.008

    How to design and interpret a multiple-choice-question test: A probabilistic approach (Journal article)

    Zhao, Y. (2006). How to design and interpret a multiple-choice-question test: A probabilistic approach. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 22(6), 1281-1286. Retrieved from http://gateway.webofknowledge.com/

    Mechanical response of porous copper manufactured by lost carbonate sintering process (Journal article)

    Tao, X. F., Zhang, L. P., & Zhao, Y. Y. (2007). Mechanical response of porous copper manufactured by lost carbonate sintering process. THERMEC 2006, PTS 1-5, 539-543, 1863-+. doi:10.4028/www.scientific.net/MSF.539-543.1863

    DOI: 10.4028/www.scientific.net/MSF.539-543.1863

    2005

    Algorithms for converting raw scores of multiple-choice question tests to conventional percentage marks (Journal article)

    Zhao, Y. Y. (2005). Algorithms for converting raw scores of multiple-choice question tests to conventional percentage marks. International Journal of Engineering Education, 21(6 PART I), 1189-1194.

    Porous Metallic Materials and Method of Production thereof (Patent)

    Zhao, Y. (2005). Porous Metallic Materials and Method of Production thereof.

    A simplified model for velocity and temperature evolution of alloy droplets in centrifugal atomisation and spray deposition (Journal article)

    Zhao, Y. Y. (2005). A simplified model for velocity and temperature evolution of alloy droplets in centrifugal atomisation and spray deposition. PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 475-479, 4261-4265. doi:10.4028/www.scientific.net/MSF.475-479.4261

    DOI: 10.4028/www.scientific.net/MSF.475-479.4261

    Algorithms for converting raw scores of multiple-choice question tests to conventional percentage marks (Journal article)

    Zhao, Y. Y. (2005). Algorithms for converting raw scores of multiple-choice question tests to conventional percentage marks. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 21(6), 1189-1194. Retrieved from http://gateway.webofknowledge.com/

    Calculation of Mean Velocity of Liquid Flow in a Nozzle (Conference Paper)

    Zhao, Y. Y. (2005). Calculation of Mean Velocity of Liquid Flow in a Nozzle. In S. Sivasundaram (Ed.), 5th International Conference on Mathematical Problems in Engineering and Aerospace Sciences (pp. 699-705). Timisoara: Cambridge Scientific Publishers.

    Liquid Flow and Heat Transfer in Centrifugal Atomisation (Conference Paper)

    Zhao, Y. Y. (2005). Liquid Flow and Heat Transfer in Centrifugal Atomisation. In S. Sivasundaram (Ed.), 5th International Conference on Mathematical Problems in Engineering and Aerospace Sciences (pp. 707-714). Timisoara: Cambridge Scientific Publishers.

    Lost carbonate sintering process for manufacturing metal foams (Journal article)

    Zhao, Y. Y., Fung, T., Zhang, L. P., & Zhang, F. L. (2005). Lost carbonate sintering process for manufacturing metal foams. SCRIPTA MATERIALIA, 52(4), 295-298. doi:10.1016/j.scriptamat.2004.10.012

    DOI: 10.1016/j.scriptamat.2004.10.012

    Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques (Journal article)

    Ma, X., Peyton, A. J., & Zhao, Y. Y. (2005). Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques. NDT & E INTERNATIONAL, 38(5), 359-367. doi:10.1016/j.ndteint.2004.10.003

    DOI: 10.1016/j.ndteint.2004.10.003

    Phase changes in sintering of Al/Mg/NaCl compacts for manufacturing Al foams by the sintering and dissolution process (Journal article)

    Sun, D. X., & Zhao, Y. (2005). Phase changes in sintering of Al/Mg/NaCl compacts for manufacturing Al foams by the sintering and dissolution process. MATERIALS LETTERS, 59(1), 6-10. doi:10.1016/j.matlet.2004.05.034

    DOI: 10.1016/j.matlet.2004.05.034

    Simulation of thermal diffusivity of Al/NaCl powder compacts in producing Al foams by the sintering and dissolution process (Journal article)

    Sun, D. X., & Zhao, Y. Y. (2005). Simulation of thermal diffusivity of Al/NaCl powder compacts in producing Al foams by the sintering and dissolution process. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 169(1), 83-88. doi:10.1016/j.jmatprotec.2005.02.263

    DOI: 10.1016/j.jmatprotec.2005.02.263

    Variations of properties across plate thickness for Al alloy 7010 (Journal article)

    Salazar-Guapuriche, M., Zhao, Y. Y., Pitman, A., & Greene, A. (2005). Variations of properties across plate thickness for Al alloy 7010. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 15(6), 1258-1263. Retrieved from http://gateway.webofknowledge.com/

    2004

    Analysis of flow development in centrifugal atomization: Part I. Film thickness of a fully spreading melt (Journal article)

    Zhao, Y. Y. (2004). Analysis of flow development in centrifugal atomization: Part I. Film thickness of a fully spreading melt. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 12(5), 959-971. doi:10.1088/0965-0393/12/5/013

    DOI: 10.1088/0965-0393/12/5/013

    Analysis of flow development in centrifugal atomization: Part II. Disintegration of a non-fully spreading melt (Journal article)

    Zhao, Y. Y. (2004). Analysis of flow development in centrifugal atomization: Part II. Disintegration of a non-fully spreading melt. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 12(5), 973-983. doi:10.1088/0965-0393/12/5/014

    DOI: 10.1088/0965-0393/12/5/014

    Effects of processing conditions on powder particle size and morphology in centrifugal atomisation of tin (Journal article)

    Xie, J. W., Zhao, Y. Y., & Dunkley, J. J. (2004). Effects of processing conditions on powder particle size and morphology in centrifugal atomisation of tin. POWDER METALLURGY, 47(2), 168-172. doi:10.1179/003258904225015482

    DOI: 10.1179/003258904225015482

    Impact response of aluminium and aluminium matrix syntactic foams (Conference Paper)

    Zhao, Y. Y., Zhang, F. L., & Zhang, L. P. (2004). Impact response of aluminium and aluminium matrix syntactic foams. In T. Research Institute for Defence (Ed.), International Conference on Planning, Design and Construction of Hardened and Protective Facilities - HARDFAC 2004 (pp. 173-182). Kuala Lumpur: Science and Technology Research Institute for Defence, Malaysia.

    Modelling Skull Formation On A Rotating Disc In Centrifugal Atomisation (Conference Paper)

    Ho, K. H., & Zhao, Y. Y. (2004). Modelling Skull Formation On A Rotating Disc In Centrifugal Atomisation. In 3rd International Conference on Computational Modeling and Simulation of Materials Vol. 43 (pp. 59-64). Acireale: Techna Group Srl.

    Modelling thermal development of liquid metal flow on rotating disc in centrifugal atomisation (Journal article)

    Ho, K. H., & Zhao, Y. (2004). Modelling thermal development of liquid metal flow on rotating disc in centrifugal atomisation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 365(1-2), 336-340. doi:10.1016/j.msea.2003.09.044

    DOI: 10.1016/j.msea.2003.09.044

    Optimisation of compaction and liquid-state sintering in sintering and dissolution process for manufacturing Al foams (Journal article)

    Zhao, Y. Y., Han, F. S., & Fung, T. (2004). Optimisation of compaction and liquid-state sintering in sintering and dissolution process for manufacturing Al foams. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 364(1-2), 117-125. doi:10.1016/j.msea.2003.08.004

    DOI: 10.1016/j.msea.2003.08.004

    2003

    'Sintering and Dissolution Process: A Novel Method for Manufacturing Aluminium Foams' (Journal article)

    Zhao, Y. Y. (2003). 'Sintering and Dissolution Process: A Novel Method for Manufacturing Aluminium Foams'. World Science-Technology R&D, 25(1), 66-71.

    Acoustic absorption behaviour of an open-celled aluminium foam (Journal article)

    Han, F. S., Seiffert, G., Zhao, Y. Y., & Gibbs, B. (2003). Acoustic absorption behaviour of an open-celled aluminium foam. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 36(3), 294-302. doi:10.1088/0022-3727/36/3/312

    DOI: 10.1088/0022-3727/36/3/312

    Solidification of melt on a rapidly rotating disc in centrifugal atomisation (Conference Paper)

    Ho, K. H., & Zhao, Y. Y. (2003). Solidification of melt on a rapidly rotating disc in centrifugal atomisation. In MODELING, CONTROL AND OPTIMIZATION IN FERROUS AND NONFERROUS INDUSTRY (pp. 225). Retrieved from http://gateway.webofknowledge.com/

    Static and dynamic energy absorption of Al foams produced by the sintering and dissolution process (Journal article)

    Sun, D. X., & Zhao, Y. Y. (2003). Static and dynamic energy absorption of Al foams produced by the sintering and dissolution process. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 34(1), 69-74. doi:10.1007/s11663-003-0056-3

    DOI: 10.1007/s11663-003-0056-3

    Stochastic modelling of removability of NaCl in sintering and dissolution process to produce Al foams (Journal article)

    Zhao, Y. Y. (2003). Stochastic modelling of removability of NaCl in sintering and dissolution process to produce Al foams. JOURNAL OF POROUS MATERIALS, 10(2), 105-111. doi:10.1023/A:1026079612440

    DOI: 10.1023/A:1026079612440

    2001

    A novel sintering-dissolution process for manufacturing Al foams (Journal article)

    Zhao, Y. Y., & Sun, D. X. (2001). A novel sintering-dissolution process for manufacturing Al foams. SCRIPTA MATERIALIA, 44(1), 105-110. doi:10.1016/S1359-6462(00)00548-0

    DOI: 10.1016/S1359-6462(00)00548-0

    Quantification of NaCl in Al foams manufactured by sintering and dissolution process (Conference Paper)

    Sun, D. X., Fung, F., & Zhao, Y. Y. (2001). Quantification of NaCl in Al foams manufactured by sintering and dissolution process. In J. Banhart, M. F. Ashby, & N. A. Fleck (Eds.), 2nd Int. Conf. Cellular Metals and Metal Foaming Technology (pp. 227-230). Bremen, Germany: Verlag MIT Publishing.

    2000

    Modelling and experimental analysis of vacuum plasma spraying. Part II: prediction of temperatures and velocities of plasma gases and Ti particles in a plasma jet (Journal article)

    Zhao, Y. Y., Grant, P. S., & Cantor, B. (2000). Modelling and experimental analysis of vacuum plasma spraying. Part II: prediction of temperatures and velocities of plasma gases and Ti particles in a plasma jet. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 8(4), 515-540. doi:10.1088/0965-0393/8/4/309

    DOI: 10.1088/0965-0393/8/4/309

    Droplet cooling in metal powder production by centrifugal atomisation (Conference Paper)

    Zhao, Y. Y. (2000). Droplet cooling in metal powder production by centrifugal atomisation. In K. Kosuge, & H. Nagai (Eds.), 2000 Powder Metallurgy World Congress (pp. 355-358). Kyoto, Japan: Japan Society of Powder and Powder Metallurgy.

    Modelling and experimental analysis of vacuum plasma spraying. Part I: prediction of initial plasma properties at plasma gun exit (Journal article)

    Zhao, Y. Y., Grant, P. S., & Cantor, B. (2000). Modelling and experimental analysis of vacuum plasma spraying. Part I: prediction of initial plasma properties at plasma gun exit. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 8(4), 497-513. doi:10.1088/0965-0393/8/4/308

    DOI: 10.1088/0965-0393/8/4/308

    Modelling deposit growth on tilted rotating cylindrical substrate in centrifugal spray deposition (Journal article)

    Zhao, Y. Y. (2000). Modelling deposit growth on tilted rotating cylindrical substrate in centrifugal spray deposition. POWDER METALLURGY, 43(2), 117-122. doi:10.1179/003258900665862

    DOI: 10.1179/003258900665862

    Modelling of liquid flow after a hydraulic jump on a rotating disk prior to centrifugal atomization (Journal article)

    Zhao, Y. Y., Dowson, A. L., & Jacobs, M. H. (2000). Modelling of liquid flow after a hydraulic jump on a rotating disk prior to centrifugal atomization. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 8(1), 55-65. doi:10.1088/0965-0393/8/1/305

    DOI: 10.1088/0965-0393/8/1/305

    1998

    Liquid flow on a rotating disk prior to centrifugal atomization and spray deposition (Journal article)

    Zhao, Y. Y., Jacobs, M. H., & Dowson, A. L. (1998). Liquid flow on a rotating disk prior to centrifugal atomization and spray deposition. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 29(6), 1357-1369. doi:10.1007/s11663-998-0059-1

    DOI: 10.1007/s11663-998-0059-1

    1995

    Mechanical behaviour of SiC fibres in a Ti matrix during fabrication by vacuum plasma spraying and vacuum hot pressing (Conference Paper)

    Zhao, Y. Y., Grant, P. S., Guo, Z. X., & Cantor, B. (1995). Mechanical behaviour of SiC fibres in a Ti matrix during fabrication by vacuum plasma spraying and vacuum hot pressing. In Unknown Conference (pp. 55-62).

    SPRAY PROCESSING OF TI METAL MATRIX COMPOSITES (Conference Paper)

    GRANT, P. S., ZHAO, Y. Y., LI, J. H., JENKINS, M. L., & CANTOR, B. (1995). SPRAY PROCESSING OF TI METAL MATRIX COMPOSITES. In SCIENCE AND TECHNOLOGY OF RAPID SOLIDIFICATION AND PROCESSING Vol. 278 (pp. 109-121). Retrieved from http://gateway.webofknowledge.com/

    1993

    FABRICATION OF TI/SICF METAL-MATRIX COMPOSITES BY VACUUM PLASMA SPRAYING (Conference Paper)

    ZHAO, Y. Y., GRANT, P. S., & CANTOR, B. (1993). FABRICATION OF TI/SICF METAL-MATRIX COMPOSITES BY VACUUM PLASMA SPRAYING. In JOURNAL DE PHYSIQUE IV Vol. 3 (pp. 1685-1691). doi:10.1051/jp4:19937264

    DOI: 10.1051/jp4:19937264

    Fabrication of Ti/SiCf metal matrix composites by vacuum plasma spraying (Journal article)

    Zhao, Y. Y., Grant, P. S., & Cantor, B. (1993). Fabrication of Ti/SiCf metal matrix composites by vacuum plasma spraying. Journal De Physique, 3(7 pt 3), 1685-1691.

    THE MICROSTRUCTURE OF SPRAY-FORMED TI-6AL-4V/SICF METAL-MATRIX COMPOSITES (Journal article)

    ZHAO, Y. Y., GRANT, P. S., & CANTOR, B. (1993). THE MICROSTRUCTURE OF SPRAY-FORMED TI-6AL-4V/SICF METAL-MATRIX COMPOSITES. JOURNAL OF MICROSCOPY-OXFORD, 169, 263-267. doi:10.1111/j.1365-2818.1993.tb03303.x

    DOI: 10.1111/j.1365-2818.1993.tb03303.x