2024
Zhao, J., Agkathidis, A., Lombardi, D., & Chen, H. (n.d.). Reinterpreting the Dougong joint: a systematic review of robotic technologies for the assembly of timber joinery. Architectural Science Review, 1-15. doi:10.1080/00038628.2024.2339995DOI: 10.1080/00038628.2024.2339995
2023
Chen, H., Zhou, R., & Wang, T. (2023). Industry Symbiosis and Waste Glass Upgrading: A Feasibility Study in Liverpool towards Circular Economy. International Journal of Engineering Management and Economics.
Wang, T., & Chen, H. -M. (2023). Integration of building information modeling and project management in construction project life cycle. AUTOMATION IN CONSTRUCTION, 150. doi:10.1016/j.autcon.2023.104832DOI: 10.1016/j.autcon.2023.104832
Alabbasi, M., Agkathidis, A., & Chen, H. (2023). Robotic 3D printing of concrete building components for residential buildings in Saudi Arabia. AUTOMATION IN CONSTRUCTION, 148. doi:10.1016/j.autcon.2023.104751DOI: 10.1016/j.autcon.2023.104751
Zhao, J., Agkathidis, A., Lombardi, D., & Chen, H. (2023). A Computational Framework for Parametric Design and Robotic Fabrication of the Dougong joint. In Proceedings of the 41st International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 1]. eCAADe. doi:10.52842/conf.ecaade.2023.1.313DOI: 10.52842/conf.ecaade.2023.1.313
2022
Chen, H. -M., Wang, Y., Zhou, K., Lam, D., Guo, W., Li, L., . . . Hopkinson, P. (2022). Reclaiming structural steels from the end of service life composite structures for reuse - An assessment of the viability of different methods. DEVELOPMENTS IN THE BUILT ENVIRONMENT, 10. doi:10.1016/j.dibe.2022.100077DOI: 10.1016/j.dibe.2022.100077
Zhou, R., Lu, Y., Chen, H. -M., & Wang, W. (2022). Mesoscopic investigation of the dynamic tensile behaviour of concrete from spalling test and implication on interpretation of test data. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 162. doi:10.1016/j.ijimpeng.2021.104139DOI: 10.1016/j.ijimpeng.2021.104139
2021
Qiu, E., Zhong, C., Wan, X., Lu, J., Chen, H. M., Pirhadi, N., . . . Chen, Q. (2021). Study on thermal conductivity model of saline soil based on particle morphology. HEAT AND MASS TRANSFER, 57(12), 2029-2043. doi:10.1007/s00231-021-03089-8DOI: 10.1007/s00231-021-03089-8
Estimation of structural steel and concrete stocks and flows at urban scale–towards a prospective circular economy (Journal article)
Ajayebi, A., Hopkinson, P., Zhou, K., Lam, D., Chen, H. -M., & Wang, Y. (2021). Estimation of structural steel and concrete stocks and flows at urban scale–towards a prospective circular economy. Resources, Conservation and Recycling, 174, 105821. doi:10.1016/j.resconrec.2021.105821DOI: 10.1016/j.resconrec.2021.105821
Wang, L. G., Ge, R., Chen, X., Zhou, R., & Chen, H. -M. (2021). Multiscale digital twin for particle breakage in milling: From nanoindentation to population balance model. Powder Technology, 386, 247-261. doi:10.1016/j.powtec.2021.03.005DOI: 10.1016/j.powtec.2021.03.005
Zhou, R., Lu, Y., Wang, L. -G., & Chen, H. -M. (2021). Mesoscale modelling of size effect on the evolution of fracture process zone in concrete. ENGINEERING FRACTURE MECHANICS, 245. doi:10.1016/j.engfracmech.2021.107559DOI: 10.1016/j.engfracmech.2021.107559
Alabbasi, M., Chen, H., & Agkathidis, A. (2021). Assessing the effectivity of additive manufacturing techniques for the production of building components: Innovation for housing construction in Saudi Arabia. In ASCAAD 2021. Cairo.
Alabbasi, M., Chen, H., & Agkathidis, A. (2021). Developing a design framework for the 3D printing production of concrete building components: A case study on column optimisation for efficient housing solutions for Saudi Arabia. In ASCAAD 2021. Cairo.
Alabbasi, M., Chen, H., & Agkathidis, A. (n.d.). Developing a design framework for the production of concrete building components: A case study on column optimisation for efficient housing solutions for Saudi Arabia. Architectural Science Review.
Zhao, J., Lombardi, D., Chen, H., & Agkathidis, A. (2021). Reinterpretation of the Dougong Joint by the use of Parametric Tools and Robotic Fabrication Techniques. In Proceedings of the 39th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe). eCAADe. doi:10.52842/conf.ecaade.2021.2.233DOI: 10.52842/conf.ecaade.2021.2.233
2020
Ajayebi, A., Hopkinson, P., Zhou, K., Lam, D., Chen, H. -M., & Wang, Y. (2020). Spatiotemporal model to quantify stocks of building structural products for a prospective circular economy. Resources, Conservation and Recycling, 162. doi:10.1016/j.resconrec.2020.105026DOI: 10.1016/j.resconrec.2020.105026
Gallego-Schmid, A., Chen, H. -M., Sharmina, M., & Mendoza, J. M. F. (2020). Links between circular economy and climate change mitigation in the built environment. JOURNAL OF CLEANER PRODUCTION, 260. doi:10.1016/j.jclepro.2020.121115DOI: 10.1016/j.jclepro.2020.121115
Zhou, K., Chen, H. -M., Wang, Y., Lam, D., Ajayebi, A., & Hopkinson, P. (2020). Developing advanced techniques to reclaim existing end of service life (EoSL) bricks - An assessment of reuse technical viability. DEVELOPMENTS IN THE BUILT ENVIRONMENT, 2. doi:10.1016/j.dibe.2020.100006DOI: 10.1016/j.dibe.2020.100006
Zhou, R., Chen, H. -M., & Lu, Y. (2020). Mesoscale modelling of concrete under high strain rate tension with a rate-dependent cohesive interface approach. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 139. doi:10.1016/j.ijimpeng.2020.103500DOI: 10.1016/j.ijimpeng.2020.103500
Chen, H. -M., Zhou, R., & Ulianov, C. (2020). Numerical Prediction and Corresponding Circular Economy Approaches for Resource Optimisation and Recovery of Underground Structures. URBAN RAIL TRANSIT, 6(1), 71-83. doi:10.1007/s40864-019-00124-0DOI: 10.1007/s40864-019-00124-0
Li, F., Song, D., Chen, H., Xiong, J., Li, X., Zhong, H., . . . Ting, D. S. W. (2020). Development and clinical deployment of a smartphone-based visual field deep learning system for glaucoma detection.. NPJ digital medicine, 3, 123. doi:10.1038/s41746-020-00329-9DOI: 10.1038/s41746-020-00329-9
2019
Zhou, R., & Chen, H. -M. (2019). Mesoscopic investigation of size effect in notched concrete beams: The role of fracture process zone. ENGINEERING FRACTURE MECHANICS, 212, 136-152. doi:10.1016/j.engfracmech.2019.03.028DOI: 10.1016/j.engfracmech.2019.03.028
Hopkinson, P., Chen, H. -M., Zhou, K., Wang, Y., & Lam, D. (2019). Recovery and reuse of structural products from end-of-life buildings. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING SUSTAINABILITY, 172(3), 119-128. doi:10.1680/jensu.18.00007DOI: 10.1680/jensu.18.00007
Ajayabi, A., Chen, H. -M., Zhou, K., Hopkinson, P., Wang, Y., & Lam, D. (n.d.). REBUILD: Regenerative Buildings and Construction systems for a Circular Economy. In IOP Conference Series: Earth and Environmental Science Vol. 225 (pp. 012015). IOP Publishing. doi:10.1088/1755-1315/225/1/012015DOI: 10.1088/1755-1315/225/1/012015
2018
Li, X., Chen, H. -M., Sun, Y., Zhou, R., & Wang, L. (2018). Study on the splitting failure of the surrounding rock of underground caverns. GEOMECHANICS AND ENGINEERING, 14(5), 499-507. doi:10.12989/gae.2018.14.5.499DOI: 10.12989/gae.2018.14.5.499
2016
Chen, H. -M., Yu, H. -S., & Smith, M. J. (2016). Physical model tests and numerical simulation for assessing the stability of brick-lined tunnels. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 53, 109-119. doi:10.1016/j.tust.2016.01.016DOI: 10.1016/j.tust.2016.01.016
2015
3D LASER SCANNING TECHNIQUE FOR THE INSPECTION AND MONITORING OF RAILWAY TUNNELS (Journal article)
Chen, H. -M., Ulianov, C., & Shaltout, R. (2015). 3D LASER SCANNING TECHNIQUE FOR THE INSPECTION AND MONITORING OF RAILWAY TUNNELS. TRANSPORT PROBLEMS, 10, 73-84. doi:10.21307/tp-2015-063DOI: 10.21307/tp-2015-063
A Holistic Design Approach using Advanced Computing Tools for Railway Track Modelling (Conference Paper)
Chen, H. -M., Ulianov, C., & Shaltout, R. E. (2015, September 1). A Holistic Design Approach using Advanced Computing Tools for Railway Track Modelling. In Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing. Civil-Comp Press. doi:10.4203/ccp.108.197DOI: 10.4203/ccp.108.197
Coupled Numerical Modelling of Railway Track Substructure with Vehicle-Track Interaction (Conference Paper)
Shaltout, R. E., Ulianov, C., & Chen, H. -M. (2015, September 1). Coupled Numerical Modelling of Railway Track Substructure with Vehicle-Track Interaction. In Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing. Civil-Comp Press. doi:10.4203/ccp.108.125DOI: 10.4203/ccp.108.125
2014
Monitoring deformation of small scale model tunnels under load testing (Journal article)
Chen, H. -M., Smith, M., Yu, H. -S., & Kokkas, N. (2014). Monitoring deformation of small scale model tunnels under load testing. SURVEY REVIEW, 46(339), 417-425. doi:10.1179/1752270614Y.0000000122DOI: 10.1179/1752270614Y.0000000122
Chen, H. (2014, July 10). Physical model tests and numerical simulation for assessing the stability of tunnels.
2011
ADVANCED MONITORING AND NUMERICAL TECHNIQUES FOR ASSESSING THE STABILITY OF TUNNELS (Conference Paper)
Chen, H. -M., Yu, H. -S., & Smith, M. (2011). ADVANCED MONITORING AND NUMERICAL TECHNIQUES FOR ASSESSING THE STABILITY OF TUNNELS. In PARTICLE-BASED METHODS II: FUNDAMENTALS AND APPLICATIONS (pp. 538-549). Retrieved from https://www.webofscience.com/
