2021
Mahmud, G. H., Hassan, A. M. T., Jones, S. W., & Schleyer, G. K. (2021). Experimental and numerical studies of ultra high performance fibre reinforced concrete (UHPFRC) two-way slabs. STRUCTURES, 29, 1763-1778. doi:10.1016/j.istruc.2020.12.053DOI: 10.1016/j.istruc.2020.12.053
2015
Response of small scale ultra high performance fibre reinforced concrete slabs to blast loading (Journal article)
Mao, L., Barnett, S. J., Tyas, A., Warren, J., Schleyer, G. K., & Zaini, S. S. (2015). Response of small scale ultra high performance fibre reinforced concrete slabs to blast loading. CONSTRUCTION AND BUILDING MATERIALS, 93, 822-830. doi:10.1016/j.conbuildmat.2015.05.085DOI: 10.1016/j.conbuildmat.2015.05.085
Peer assisted learning (PAL) in the School of Engineering – Transfer of good practice (Conference Paper)
Schleyer, G., & Sedghi, G. (2015). Peer assisted learning (PAL) in the School of Engineering – Transfer of good practice. In Learning and Teaching Conference. University of Liverpool.
2014
Undergraduate laboratory exercise on impact testing of structures (Journal article)
Schleyer, G., & Jones, N. (2014). Undergraduate laboratory exercise on impact testing of structures. International Journal of Mechanical Engineering Education, 42(4), 340-350. doi:10.1177/0306419015574645DOI: 10.1177/0306419015574645
Characterisation of aluminium matrix syntactic foams under drop weight impact (Journal article)
Altenaiji, M., Guan, Z. W., Cantwell, W. J., Zhao, Y., & Schleyer, G. (2014). Characterisation of aluminium matrix syntactic foams under drop weight impact. Materials and Design, 59, 296-302. doi:10.1016/j.matdes.2014.03.002DOI: 10.1016/j.matdes.2014.03.002
Modelling of perforation failure in fibre metal laminates subjected to high impulsive blast loading (Journal article)
Sitnikiva, E., Guan, Z. W., Schleyer, G. K., & Cantwell, W. J. (2014). Modelling of perforation failure in fibre metal laminates subjected to high impulsive blast loading. International Journal of Solids and Structures, 51(18), 3135-3146. doi:10.1016/j.ijsolstr.2014.05.010DOI: 10.1016/j.ijsolstr.2014.05.010
Numerical simulation of ultra high performance fibre reinforced concrete panel subjected to blast loading (Journal article)
Mao, L., Barnett, S., Begg, D., Schleyer, G., & Wight, G. (2014). Numerical simulation of ultra high performance fibre reinforced concrete panel subjected to blast loading. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 64, 91-100. doi:10.1016/j.ijimpeng.2013.10.003DOI: 10.1016/j.ijimpeng.2013.10.003
2013
Transient pressure loading of clamped metallic plates with pre-formed holes (Journal article)
Rakvåg, K. G., Underwood, N. J., Schleyer, G. K., Børvik, T., & Hopperstad, O. S. (2013). Transient pressure loading of clamped metallic plates with pre-formed holes. International Journal of Impact Engineering, 53, 44-55. doi:10.1016/j.ijimpeng.2012.07.013DOI: 10.1016/j.ijimpeng.2012.07.013
2012
On pulse pressure loading of plates with holes (Journal article)
Schleyer, G., Underwood, N., Do, H., Paik, J., & Kim, B. (2012). On pulse pressure loading of plates with holes. Open Engineering, 2(4), 496-508. doi:10.2478/s13531-012-0023-3DOI: 10.2478/s13531-012-0023-3
Experimental investigation of large plastic deformation and fracture in explosively loaded open-ended steel cylinders (Journal article)
Schleyer, G. K., & Rushton, N. J. (2012). Experimental investigation of large plastic deformation and fracture in explosively loaded open-ended steel cylinders. International Journal of Computational Methods and Experimental Measurements, 1(1), 1-16. doi:10.2495/cmem-v1-n1-1-16DOI: 10.2495/cmem-v1-n1-1-16
Low-impulse blast behaviour of fibre-metal laminates (Journal article)
Vo, T. P., Guan, Z. W., Cantwell, W. J., & Schleyer, G. K. (2012). Low-impulse blast behaviour of fibre-metal laminates. Composite Structures, 94(3), 954-965. doi:10.1016/j.compstruct.2011.10.027DOI: 10.1016/j.compstruct.2011.10.027
'Experiential learning using a computer-based virtual reconstruction of an accident investigation' (Conference Paper)
Stacey, N., Underwood, N. J., Schleyer, G. K., & Okunribido, O. (2012). 'Experiential learning using a computer-based virtual reconstruction of an accident investigation'. In EE2012 - Innovation, Practice and Research in Engineering Education EE2012 (pp. 1-4). Coventry: Loughborough University.
'Nonlinear structural consequence analysis of blast wall structures under hydrocarbon explosive loads' (Conference Paper)
Sohn, J. M., Kim, B. H., Paik, J. K., & Schleyer, G. K. (2012). 'Nonlinear structural consequence analysis of blast wall structures under hydrocarbon explosive loads'. In OMAE2012 (pp. 1-11). Rio de Janeiro: ASME.
'Nonlinear structural consequences of plates with apertures under pulse pressure loads: an experimental and numerical study' (Conference Paper)
Underwood, N. J., Schleyer, G. K., Paik, J. K., & Kim, B. J. (2012). 'Nonlinear structural consequences of plates with apertures under pulse pressure loads: an experimental and numerical study'. In G. K. Schleyer, & C. A. Brebbia (Eds.), Structures under Shock and Impact (pp. 27-37). Kos, Greece: WIT Press.
Modelling of the low-impulse blast behaviour of fibre-metal laminates based on different aluminium alloys (Journal article)
Vo, T. P., Guan, Z. W., Cantwell, W. J., & Schleyer, G. K. (2012). Modelling of the low-impulse blast behaviour of fibre-metal laminates based on different aluminium alloys. Composites Part B: Engineering, 44(1), 141-151.
2011
Characterisation of aluminium matrix syntactic foams under static and dynamic loading (Journal article)
Altenaiji, M., Schleyer, G. K., & Zhao, Y. Y. (2011). Characterisation of aluminium matrix syntactic foams under static and dynamic loading. PERFORMANCE, PROTECTION AND STRENGTHENING OF STRUCTURES UNDER EXTREME LOADING, 82, 142-147. doi:10.4028/www.scientific.net/AMM.82.142DOI: 10.4028/www.scientific.net/AMM.82.142
'Buckling and ultimate strength of damaged plates with openings' (Conference Paper)
Do, H. M., Schleyer, G. K., Underwood, N. J., Paik, J. K., & Kim, B. J. (2011). 'Buckling and ultimate strength of damaged plates with openings'. In International Conference on Advances in Structural Engineering and Mechanics (pp. 1939-1947). Seoul: Techno-Press.
'On the simplified analysis of square plates with holes' (Conference Paper)
Schleyer, G. K., Underwood, N. J., Do, H. M., Paik, J. K., & Kim, B. J. (2011). 'On the simplified analysis of square plates with holes'. In OMAE2011 (pp. 1-5). Rotterdam: ASME.
'UHPFRC panel testing' (Journal article)
Schleyer, G. K., Barnett, S. J., Millard, S. G., Wight, G., & Rebentrost, M. (2011). 'UHPFRC panel testing'. The Structural Engineer, 89(23/24), 34-40.
2010
'Blast tests of ultra high performance fibre reinforced concrete panels' (Journal article)
Barnett, S. J., Millard, S. G., Tyas, A., & Schleyer, G. K. (2010). 'Blast tests of ultra high performance fibre reinforced concrete panels'. Proceedings of the Institution of Civil Engineers: Construction Materials, 163(3), 127-129.
'Major Hazards Management - a finishing module for undergraduate engineers on how to manage risk' (Conference Paper)
Schleyer, G. K., Underwood, N. J., Dalzell, G., & Stacey, N. (2010). 'Major Hazards Management - a finishing module for undergraduate engineers on how to manage risk'. In EE2010 International Conference (pp. 8). Birmingham: The Higher Education Academy Engineering Subject Centre.
'Modelling the response of UHPFRC panels to explosive loading' (Conference Paper)
Schleyer, G. K., Barnett, S. J., Millard, S. G., & Wight, G. (2010). 'Modelling the response of UHPFRC panels to explosive loading'. In N. Jones, C. A. Brebbia, U. Mander, & C. A. Brebbia (Eds.), SUSI 11 (pp. 173-184). Tallinn: WIT Press.
'Royal Academy of Engineering Industrial Secondment Scheme End-of-Year Report' (Report)
Schleyer, G. K. (2010). 'Royal Academy of Engineering Industrial Secondment Scheme End-of-Year Report'. London: Royal Academy of Engineering.
2009
Indentation Tests on Al Matrix Syntactic Foams (Chapter)
Tao, X. F., Schleyer, G. K., & Zhao, Y. Y. (2009). Indentation Tests on Al Matrix Syntactic Foams. In Unknown Book (Vol. 12, pp. 97-104). doi:10.1007/978-1-4020-9404-0_11DOI: 10.1007/978-1-4020-9404-0_11
'Building Damage Evaluation Using SDOF Methods and Spreadsheet Analysis Tools' (Report)
Schleyer, G. K. (2009). 'Building Damage Evaluation Using SDOF Methods and Spreadsheet Analysis Tools'. Chester: Shell Global Solutions.
'Indentation Tests on Al Matrix Syntactic Foams' (Conference Paper)
Tao, X. F., Schleyer, G. K., & Zhao, Y. Y. (2009). 'Indentation Tests on Al Matrix Syntactic Foams'. In IUTAM Symposium on Mechanical Properties of Cellular Materials Vol. 12 (pp. 97-104). Cachan: Springer Netherlands.
'Integrating risk concepts into undergraduate engineering courses' (Report)
Stacey, N., Simpson, K., & Schleyer, G. K. (2009). 'Integrating risk concepts into undergraduate engineering courses'. Bootle: HSE.
'Royal Academy of Engineering Industrial Secondment Scheme Secondee Report' (Report)
Schleyer, G. K. (2009). 'Royal Academy of Engineering Industrial Secondment Scheme Secondee Report'. London: Royal Academy of Engineering.
Blast resistance of ultra high performance fibre reinforced concrete (Conference Paper)
Barnett, S. J., Tyas, A., Millard, S. G., Schleyer, G. K., & Soutsos, M. N. (2009). Blast resistance of ultra high performance fibre reinforced concrete. In Concrete Communications Conference 2009 (pp. 2). Leeds: The Concrete Centre.
Explosion and impact resistance of ultra high performance fibre reinforced concrete (Conference Paper)
Millard, S. G., Barnett, S. J., Schleyer, G. S., Tyas, A., & Soutsos, M. N. (2009). Explosion and impact resistance of ultra high performance fibre reinforced concrete. In PROTECT 2009 (pp. 10). Hayama, Japan: National Defence Academy, Japan.
Testing of a New Blast-Resistant Concrete (Conference Paper)
Millard, S. G., Barnett, S. J., Soutsos, M. N., Schleyer, G. K., & Tyas, A. (2009). Testing of a New Blast-Resistant Concrete. In GEMS 2009, (pp. 10). London: GEMS.
2008
Internal explosive loading of steel pipes (Journal article)
Rushton, N., Schleyer, G. K., Clayton, A. M., & Thompson, S. (2008). Internal explosive loading of steel pipes. Thin-Walled Structures, 46(7-9), 870-877. doi:10.1016/j.tws.2008.01.027DOI: 10.1016/j.tws.2008.01.027
'Analysis of the explosive loading of open-ended steel pipes' (Conference Paper)
Rushton, N., Schleyer, G. K., & Cheesman, R. (2008). 'Analysis of the explosive loading of open-ended steel pipes'. In SUSI 2008 (pp. 10). The Algarve: Wessex Institute of Technology.
'Role-play experience through virtual reconstruction of accident investigation' (Conference Paper)
Schleyer, G. K., Duan, R. F., & Stacey, N. (2008). 'Role-play experience through virtual reconstruction of accident investigation'. In EE 2008 (pp. 7). Loughborough: Higher Education Academy Engineering Subject Centre.
Dynamic testing of ultra high performance fibre reinforced concrete (Conference Paper)
Barnett, S. J., Millard, S. G., Tyas, A., Schleyer, G. K., & Soutsos, M. N. (2008). Dynamic testing of ultra high performance fibre reinforced concrete. In Concrete Communications 2008 (pp. 125-131). Liverpool: Concrete Centre.
Health and Safety in Civil Engineering CDIO (Conference Paper)
Millard, S. G., Schleyer, G. K., Stacey, N., & Taylor, R. (2008). Health and Safety in Civil Engineering CDIO. In CDIO (Ed.), 4th Int. CDIO Conf (pp. 6). Gent: University of Gent.
2007
Behaviour of fibre metal laminates subjected to localised blast loading—Part II: Quantitative analysis (Journal article)
Lemanski, S. L., Nurick, G. N., Langdon, G. S., Simmons, M. C., Cantwell, W. J., & Schleyer, G. K. (2007). Behaviour of fibre metal laminates subjected to localised blast loading—Part II: Quantitative analysis. International Journal of Impact Engineering, 34(7), 1223-1245. doi:10.1016/j.ijimpeng.2006.05.009DOI: 10.1016/j.ijimpeng.2006.05.009
Behaviour of fibre–metal laminates subjected to localised blast loading: Part I—Experimental observations (Journal article)
Langdon, G. S., Lemanski, S. L., Nurick, G. N., Simmons, M. C., Cantwell, W. J., & Schleyer, G. K. (2007). Behaviour of fibre–metal laminates subjected to localised blast loading: Part I—Experimental observations. International Journal of Impact Engineering, 34(7), 1202-1222. doi:10.1016/j.ijimpeng.2006.05.008DOI: 10.1016/j.ijimpeng.2006.05.008
Failure characterisation of blast-loaded fibre–metal laminate panels based on aluminium and glass–fibre reinforced polypropylene (Journal article)
LANGDON, G., NURICK, G., LEMANSKI, S., SIMMONS, M., CANTWELL, W., & SCHLEYER, G. (2007). Failure characterisation of blast-loaded fibre–metal laminate panels based on aluminium and glass–fibre reinforced polypropylene. Composites Science and Technology, 67(7-8), 1385-1405. doi:10.1016/j.compscitech.2006.09.010DOI: 10.1016/j.compscitech.2006.09.010
Response of Quasi-statically Loaded Corrugated Panels with Partially Restrained Boundaries (Journal article)
Langdon, G. S., & Schleyer, G. K. (2007). Response of Quasi-statically Loaded Corrugated Panels with Partially Restrained Boundaries. Experimental Mechanics, 47(2), 251-261. doi:10.1007/s11340-006-9026-4DOI: 10.1007/s11340-006-9026-4
'Advancing Engineering Dynamics through World Class Collaborations' (Report)
Schleyer, G. K. (2007). 'Advancing Engineering Dynamics through World Class Collaborations'. Swindon: EPSRC.
'Assessing the awareness of risk concepts by new engineering students' (Journal article)
Schleyer, G. K., Duan, R. F., Williamson, J., & Stacey, N. (2007). 'Assessing the awareness of risk concepts by new engineering students'. International Journal of Mechanical Engineering Education, 35(3), 184-197.
Development of advanced concrete materials for antiterrorism applications (Conference Paper)
Barnett, S. J., Millard, S. G., Schleyer, G. S., Soutsos, M. N., & Tyas, A. (2007). Development of advanced concrete materials for antiterrorism applications. In GEMS (Government Experts on Mitigating Systems), 8th Annual Meeting (pp. 6). Camberley: GEMS.
Explosion and impact resistance of ultra high performance fibre reinforced concrete (Journal article)
Barnett, S. J., Millard, S. G., Schleyer, G. K., & Tyas, A. (2007). Explosion and impact resistance of ultra high performance fibre reinforced concrete. Concrete, 32-33.
Flexural performance of UHPFRC (Conference Paper)
Barnett, S. J., Millard, S. G., Soutsos, M. N., Schleyer, G. K., & Tyas, A. (2007). Flexural performance of UHPFRC. In PROTECT-2007, Int. Conf (pp. 10). Whistler, BC, Canada: UBC.
Ultra high performance fibre reinforced concrete for explosion resistant structures (Conference Paper)
Barnett, S. J., Millard, S. G., Soutsos, M. N., Schleyer, G. K., Tyas, A., & Le, T. T. (2007). Ultra high performance fibre reinforced concrete for explosion resistant structures. In M. I. Russell, & P. A. M. Basheer (Eds.), Concrete Platform 2007, An International Conference in honour of Prof. Adrian Long and Prof. John Bungey (pp. 565-574). Belfast: Queen�s University of Belfast.
2006
Understanding the behaviour of fibre metal laminates subjected to localised blast loading (Journal article)
Lemanski, S. L., Nurick, G. N., Langdon, G. S., Simmons, M. S., Cantwell, W. J., & Schleyer, G. K. (2006). Understanding the behaviour of fibre metal laminates subjected to localised blast loading. Composite Structures, 76(1-2), 82-87. doi:10.1016/j.compstruct.2006.06.012DOI: 10.1016/j.compstruct.2006.06.012
Deformation and failure of profiled stainless steel blast wall panels. Part III: finite element simulations and overall summary (Journal article)
Langdon, G. S., & Schleyer, G. K. (2006). Deformation and failure of profiled stainless steel blast wall panels. Part III: finite element simulations and overall summary. International Journal of Impact Engineering, 32(6), 988-1012. doi:10.1016/j.ijimpeng.2004.08.002DOI: 10.1016/j.ijimpeng.2004.08.002
Pulse pressure loading of aircraft structural panels (Journal article)
Simmons, M. C., & Schleyer, G. K. (2006). Pulse pressure loading of aircraft structural panels. Thin-Walled Structures, 44(5), 496-506. doi:10.1016/j.tws.2006.05.002DOI: 10.1016/j.tws.2006.05.002
'Educating engineers in risk concepts' (Conference Paper)
Schleyer, G. K., Duan, R. F., Stacey, N., & Williamson, J. (2006). 'Educating engineers in risk concepts'. In International Conference on Innovation, Good Practice and Research in Engineering Education (pp. 496-501). Liverpool: Higher Education Academy Subject Centres for Materials Education.
'Experimental investigation of blast wall panels under shock pressure loading' (Journal article)
Schleyer, G. K., Lowak, M. J., Polcyn, M. A., & Langdon, G. S. (2006). 'Experimental investigation of blast wall panels under shock pressure loading'. International Journal of Impact Engineering, 34, 1095-1118.
'Risk education in engineering - development of year 1 materials' (Report)
Schleyer, G. K., Duan, R. F., Stacey, N., & Williamson, J. (2006). 'Risk education in engineering - development of year 1 materials'. Bootle: HSE.
'Validated finite element analysis model of blast wall panels under shock pressure loading' (Journal article)
Schleyer, G. K., Kewaisy, T. H., Wesevich, J. W., & Langdon, G. S. (2006). 'Validated finite element analysis model of blast wall panels under shock pressure loading'. International Journal of Ships and Offshore Structures, 1(3), 257-271.
2005
Peer tutoring in conceptual design (Journal article)
Schleyer, G. K., Langdon, G. S., & James, S. (2005). Peer tutoring in conceptual design. European Journal of Engineering Education, 30(2), 245-254. doi:10.1080/03043790500087084DOI: 10.1080/03043790500087084
Inelastic deformation and failure of profiled stainless steel blast wall panels. Part I: experimental investigations (Journal article)
Langdon, G. S., & Schleyer, G. K. (2005). Inelastic deformation and failure of profiled stainless steel blast wall panels. Part I: experimental investigations. International Journal of Impact Engineering, 31(4), 341-369. doi:10.1016/j.ijimpeng.2003.12.002DOI: 10.1016/j.ijimpeng.2003.12.002
Inelastic deformation and failure of profiled stainless steel blast wall panels. Part II: analytical modelling considerations (Journal article)
Langdon, G. S., & Schleyer, G. K. (2005). Inelastic deformation and failure of profiled stainless steel blast wall panels. Part II: analytical modelling considerations. International Journal of Impact Engineering, 31(4), 371-399. doi:10.1016/j.ijimpeng.2003.12.011DOI: 10.1016/j.ijimpeng.2003.12.011
'Assessing the awareness of risk concepts by new engineering students' (Conference Paper)
Schleyer, G. K., Duan, R. F., Williamson, J., & Stacey, N. (2005). 'Assessing the awareness of risk concepts by new engineering students'. In 4th International Conference on Safety of Industrial Automated Systems (pp. unknown). Rosemont: Publisher unknown.
'Bomb blast protection using novel lightweight materials' (Report)
Schleyer, G. K., & Cantwell, W. J. (2005). 'Bomb blast protection using novel lightweight materials'. Swindon: EPSRC.
2004
Predicting the effects of blast loading arising from a pressure vessel failure: A review (Journal article)
Schleyer, G. K. (2004). Predicting the effects of blast loading arising from a pressure vessel failure: A review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218(4), 181-190. doi:10.1243/0954408042466936DOI: 10.1243/0954408042466936
Scaling of pulse loaded mild steel plates with different edge restraint (Journal article)
Schleyer, G. K., Hsu, S. S., & White, M. D. (2004). Scaling of pulse loaded mild steel plates with different edge restraint. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 46(9), 1267-1287. doi:10.1016/j.ijmecsci.2004.08.010DOI: 10.1016/j.ijmecsci.2004.08.010
Modelling the response of semi-rigid supports under combined loading (Journal article)
Langdon, G. S., & Schleyer, G. K. (2004). Modelling the response of semi-rigid supports under combined loading. Engineering Structures, 26(4), 511-517. doi:10.1016/j.engstruct.2003.12.001DOI: 10.1016/j.engstruct.2003.12.001
Unusual strain rate sensitive behaviour of AISI 316L austenitic stainless steel (Journal article)
Langdon, G. S., & Schleyer, G. K. (2004). Unusual strain rate sensitive behaviour of AISI 316L austenitic stainless steel. The Journal of Strain Analysis for Engineering Design, 39(1), 71-86. doi:10.1177/030932470403900106DOI: 10.1177/030932470403900106
2003
Experimental investigation of corner-supported architectural glazing under pulse pressure loading (Journal article)
Goodfellow, A. M., & Schleyer, G. K. (2003). Experimental investigation of corner-supported architectural glazing under pulse pressure loading. The Journal of Strain Analysis for Engineering Design, 38(5), 469-481. doi:10.1243/03093240360713522DOI: 10.1243/03093240360713522
Pulse pressure loading of clamped mild steel plates (Journal article)
Schleyer, G. K., Hsu, S. S., White, M. D., & Birch, R. S. (2003). Pulse pressure loading of clamped mild steel plates. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 28(2), 223-247. doi:10.1016/S0734-743X(02)00042-8DOI: 10.1016/S0734-743X(02)00042-8
'Inelastic deformation and failure of clamped aluminium plates under pulse pressure loading' (Journal article)
Langdon, G. S., & Schleyer, G. K. (2003). 'Inelastic deformation and failure of clamped aluminium plates under pulse pressure loading'. International Journal of Impact Engineering, 28(10), 1107-1127. doi:10.1016/S0734-743X(03)00036-9DOI: 10.1016/S0734-743X(03)00036-9
2002
Blast and impact resistance studies of laser welded and riveted panel structures (Conference Paper)
Dearden, G., Simmons, M. C., Okon, P., Schleyer, G. K., & Watkins, K. G. (2002). Blast and impact resistance studies of laser welded and riveted panel structures. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Electrorheological and magnetorheological fluids in blast resistant design applications (Journal article)
El Wahed, A. K., Sproston, J. L., & Schleyer, G. K. (2002). Electrorheological and magnetorheological fluids in blast resistant design applications. Materials & Design, 23(4), 391-404. doi:10.1016/s0261-3069(02)00003-1DOI: 10.1016/s0261-3069(02)00003-1
Blast and impact resistance studies of laser welded and riveted panel structures (Conference Paper)
Dearden, G., Simmons, M. C., Okon, P., Schleyer, G. K., & Watkins, K. G. (2002). Blast and impact resistance studies of laser welded and riveted panel structures. In International Congress on Applications of Lasers & Electro-Optics. Laser Institute of America. doi:10.2351/1.5065614DOI: 10.2351/1.5065614
1998
Blast loading of stiffened plates: Experimental, analytical and numerical investigations (Conference Paper)
Schleyer, G. K., Hsu, S. S., & White, M. D. (1998). Blast loading of stiffened plates: Experimental, analytical and numerical investigations. In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP Vol. 361 (pp. 237-255).
