# Physics with Astronomy BSc (Hons)

• Offers a Year in China
• Accredited

## Key information

• Course length: 3 years
• UCAS code: F3F5
• Year of entry: 2019
• Typical offer: A-level : ABB / IB : 33 / BTEC : Applications considered

### Programme Year One

The first year starts with a one-week project to familiarise you with the staff and other students. There will be two Maths modules in each of the first two years; these are designed to provide the Mathematical skills required by Physics students.

#### Year One Compulsory Modules

• ##### Newtonian Dynamics (PHYS101)
Level 1 15 First Semester 60:40 To introduce the fundamental concepts and principles of classical mechanics at an elementary level. To provide an introduction to the study of fluids. To introduce the use of elementary vector algebra in the context of mechanics. Demonstrate a basic knowledge of the laws of classical mechanics, and understand physical quantities with magnitudes, directions (where applicable), units and uncertainties. understand physical quantities with magnitudes, directions (where applicable), units and uncertainties. apply the laws of mechanics to statics, linear motion, motion in a plane, rotational motion, simple harmonic motion and gravitation. Apply the laws of mechanics to unseen situations and solve problems.Develop a knowledge and understanding of the analysis of linear and rotational motion.​Develop a knowledge and understanding of the analysis of orbits, gravity, simple harmonic motion and fluid flow.
• ##### Thermal Physics (PHYS102)
Level 1 15 First Semester 60:40 The module aims to make the student familiar with The concepts of Thermal Physics The zeroth, first and second laws of Thermodynamics Heat engines The kinetic theory of gasses Entropy The equation of state Van der Waals equation States of matter and state changes The basis of statistical mechanics Construct a temperature scale and understand how to calibrate a thermometer with that scale​Calculate the heat flow into and work done by a system and how that is constrained by the first law of Thermodynamics ​Analyse the expected performance of heat engines, heat pumps and refrigerators ​Relate the second law of thermodynamics to the operation of heat engines, particularly the Carnot engine​Understand the kinetic theory of gases and calculate properties of gases including the heat capacity and mean free path​Use the theory of equipartition to relate the structure of the molecules to the measured heat capacity ​Calculate the linear and volume thermal expansions of materials​Understand the basis of entropy and relate this to the second law of thermodynamics andcalculate entropy changes ​Relate the equation of state for a material to the macroscopic properties of the material​Understand the PV and PT diagrams for materials and the phase transitions that occur when changing the state variables for materials ​​​Be able to link the microscopic view of a system to its macroscopic state variables​Be able to demonstrate the equivalence of the Clausius and Kelvin-Planck statements of the second law of thermodynamics.​Be able to derive and use Maxwell''s equations
• ##### Wave Phenomena (PHYS103)
Level 1 15 Second Semester 60:40 To introduce the fundamental concepts and principles of wave phenomena. To highlight the many diverse areas of physics in which an understanding of waves is crucial. To introduce the concepts of interference and diffraction. Demonstrate an understanding of oscillators. ​Understand the fundamental principles underlying wave phenomena. ​Apply those principles to diverse phenomena. ​Understand wave reflection and transmission, superposition of waves. ​Solve problems on the behaviour of electromagnetic waves in vacuo and in dielectric materials. ​Understand linear and circular polarisation. ​Understand inteference and diffraction effects.  ​Understand lenses and optical instruments. ​Apply Fourier techniques and understand their link to diffraction patterns. ​Understand the basic principles of lasers
• ##### Foundations of Modern Physics (PHYS104)
Level 1 15 Second Semester 60:40 To introduce the theory of special relativity and its experimental proofs. To carry out calculations using relativity and visualise them. To introduce the concepts and the experimental foundations of quantum theory. To carry out simple calculations related to quantum mechanical problem tasks. To show the impact of relativity and quantum theory on contemporary science and society. An understanding why classical mechanics must have failed to describe the properties of light, the motion of objects with speeds close to the speed of light and the properties of microspopic systems.​A basic knowledge on the experimental and theoretical concepts which founded modern physics, i.e. that either relativity or quantum theory or both are needed to explain certain phenomena.​​A knowledge of the postulates of special relativity.​​An understanding of the concept of spacetime, of the relativity of length, time and velocity.​An ability to apply the Lorentz transformation and the concept of Lorentz invariance to simple cases​​An ability to apply the equations of relativistic energy, momentum and rest mass.​​An understanding of the Doppler effect for light and visualisation of relativistic effects.​​An ability to solve problems based on special relativity.​​An understanding why quantum theory is the conceptual framework to understand the microscopic properties of the universe.​​ ​An understanding of the quantum theory of light and the ability to apply the energy-momentum conservation for light, e.g. photo-electric effect, Compton effect.​​An understanding of the structure of atoms and its experimental foundations.​An understanding of Bohr''s theory of the atom and its application to the H-atom including the concept of principal quantum numbers.​​An understanding of de Broglie waves and their statistical interpretation.​​An ability to explain the experimental evidence of de Broglie waves with scattering experiments of electrons, X-rays and neutrons.​​An understanding of the principles of quantum mechanical measurements and Heisenberg''s uncertainty principle.​​ ​An understanding of the identity principle of microscopic particles and the basic idea of quantum (Fermi-Dirac and Bose-Einstein) statistics.​​A basic knowledge of contemporary applications of quantum theory and relativity, e.g. nuclear reactor and nuclear fissions, and the impact on our society.​
• ##### Introduction to Computational Physics (PHYS105)
Level 1 7.5 First Semester 0:100 To develop the ability to break down physical problems into steps amenable to solution using algorithms To develop skills in using computers to perform and run algorithms To introduce techniques for analysing and presenting dataTo introduce elemenatry Monte Carlo techniquesTo introduce basic computer algebraTo illustrate the insight into physics which can be obtained using computational methods Ability to produce algorithms to solve simple physical problems.Ability to program and use simple algorithms on a computerAbility to analyse and present physical dataAbility to produce simple Monte Carlo models​Ability to carry out basic symbolic manipulations using a computer
• ##### Practical Physics I (PHYS106)
Level 1 15 Whole Session 0:100 To provide a core of essential introductory laboratory methods which overlap and develop from A-Level To introduce the basis of experimental techniques in physical measurement, the use of computer techniques in analysis, and to provide experience in doing experiments, keeping records and writing reports. To compliment the core physics program with experimental examples of material taught in the lecture courses. Experienced the practical nature of physics.  ​Developed an awareness of the importance of accurate experimentation, particularly observation, record keeping.  ​ Developed the ability to plan, execute and report on the results of an investigation using appropriate analysis of the data and associated uncertainties  ​Developed the practical and technical skill required for physics experimentation and an appreciation of the importance of a systematic approach to experimental measurement. ​Developed problem solving skills of a practical nature  ​Developed analytical skills in the analysis of the data  ​Developed communication skills in the presentation of the investigation in a clear and logical manner ​Developed investgative skills in performing the experiment and extracting information from various sources with which to compare the results ​Developed the ability to organise their time and meet deadlines  ​Understand the interaction between theory and experiment, in particular the ties to the material presented in the lecture courses.
• ##### Mathematics for Physicists I (PHYS107)
Level 1 15 First Semester 70:30 To ensure all students possess a common level of knowledge and skills irrespective of background. To provide a foundation for the mathematics required by physical scientists. To assist students in acquiring the skills necessary to use the mathematics developed in the module. A good working knowledge of differential and integral calculusFamiliarity with some of the elementary functions common in applied mathematics and science An introductory knowledge of functions of several variablesManipulation of complex numbers and use them to solve simple problems involving fractional powers​An introductory knowledge of seriesA good rudimentary knowledge of simple problems involving statistics: binomial and Poisson distributions, mean, standard deviation, standard error of mean
• ##### Mathematics for Physicists II (PHYS108)
Level 1 15 Second Semester 70:30 To consolidate and extend the understanding of mathematics required for the physical sciences. To develop the student’s ability to apply the mathematical techniques developed in the module to the understanding of physical problems. Ability to manipulate matrices with confidence and use matrix methods to solve simultaneous linear equations.​Familiarity with methods for solving first and second order differential equations in one variable. ​A basic knowledge of vector algebra.A basic understanding of Fourier series and transforms.​​A basic understanding of series methods for the solution of differential equations

### Programme Year Two

In year two you will broaden your understanding of Physics and Astronomy, with modules designed to ensure you have mastered the full range of Physics concepts

#### Year Two Compulsory Modules

• ##### Electromagnetism (PHYS201)
Level 2 15 First Semester 70:30 To introduce the fundamental concepts and principles of electrostatics, magnetostatics, electromagnetism and Maxwell''s equations, and electromagnetic waves. To introduce differential vector analysis in the context of electromagnetism. To introduce circuit principles and analysis (EMF, Ohm''s law, Kirchhoff''s rules, RC and RLC circuits) To introduce the formulation fo Maxwell''s equations in the presence of dielectric and magnetic materials. To develop the ability of students to apply Maxwell''s equations to simple problems involving dielectric and magnetic materials. To develop the concepts of field theories in Physics using electromagnetism as an example. To introduce light as an electromagnetic wave. ​Demonstrate a good knowledge of the laws of electromagnetism and an understanding of the practical meaning of Maxwell''s equations in integral and differential forms. ​Apply differential vector analysis to electromagnetism. ​Demonstrate simple knowledge and understanding of how the presence of matter affects electrostatics and magnetostatics, and the ability to solve simple problems in these situations. ​Demonstrate knowledge and understanding of how the laws are altered in the case of non-static electric and magnetic fields and the ability to solve simple problems in these situations.
• ##### Condensed Matter Physics (PHYS202)
Level 2 15 First Semester 70:30 ​ The aims of Phys202 are to introduce the most important and basic concepts in condensed matter physics relating to the different materials we commonly see in the world around us. Condensed matter physics is one of the most active areas of research in modern physics, whose scope is extremely broad. The ultimate aim of this course is to introduce its central ideas and methodology to the students. Condensed matter refers to both liquids and solids and all kinds of other forms of matter in between those two extremes, generally known as “soft matter". While the course will touch on liquids, the emphasis will be on crystalline solids, including some nano-materials. The reason for focusing on crystals is that the periodicity of a crystal is what allows us to make progress in developing a theory for various phenomena in solids based on first principles. Two important concepts are: • the electronic states of electrons in a solid and • the vibrations of atoms in the solid. The description of these ideas basically refer to the theory of electronic band structure and the theory of phonons. These concepts form the basis for understanding a wide range of phenomena including how the atoms bond together to form the crystal, what are some basic statistical properties like specific heat, how electrons move in solids and electronic transport, why are some materials metals and others semiconductors and insulators, and how do solids interact with electromagnetic fields. The course will also introduce optical and magnetic properties in solids, scattering phenomena, thermal conductivity and effect of defects in solids, semiconductors, magnetism and go beyond the free electron model to touch on intriguing effects such as superconductivity. On satisfying the requirements of this course, students will have the knowledge and skills to understand the basic concepts of bonding in solids, establish an understanding of electron configuration in atoms and in the condensed matter in terms of bonding, and relating them to band structure description.​Students will be able to understand how solid structures are described mathematically and how material properties can be predicted​. ​Students will be able to establish a foundation in basic crystallography, using Bragg''s law, and understand the concept of the reciprocal lattice.​Students will understand basic transport properties, both electronic and thermal, in solids.​ Students will understand the concept of electron and hole carrier statistics, effective masses and transport in intrinsic and extrinsic semiconductors​Students will learn the basics of magnetism, the atomic origin and classical treatment of diamagnetism and paramagnetism, quantization of angular momentum and Hund''s rule, and introduced to weak magnetism in solids.​​Students will become familiar to the general language of condensed matter physics, key theories and concepts, ultimately enebling them to read and understand research papers.
• ##### Quantum and Atomic Physics (PHYS203)
Level 2 15 Second Semester 70:30 To introduce students to the concepts of quantum theory. To show how Schrodinger''s equation is applied to bound states (well potentials, harmonic oscillator, hydrogen atoms, multi-electron atoms) and particle flux (scattering). To show how quantum ideas provide an understanding of atomic structure. At the end of the module the student should have: An understanding of the reasons why microscopic systems require quantum description and statistical interpretation. Knowledge of the Schrodinger equation and how it is formulated to describe simple physical systems. Understanding of the basic technique of using Schrodinger''s equation and ability to determine solutions in simple cases. Understanding of how orbital angular momentum is described in quantum mechanics and why there is a need for spin. Understanding how the formalism of quantum mechanics describes the structure of atomic hydrogen and, schematically, how more complex atoms are described.
• ##### Nuclear and Particle Physics (PHYS204)
Level 2 15 Second Semester 70:30 To introduce Rutherford and related scattering. To introduce nuclear size, mass and decay modes To provide some applications and examples of nuclear physics To introduce particle physics, including interactions, reactions and decay To show some recent experimental discoveries To introduce relativistic 4-vectors for applications to collision problems basic understanding of Rutherford, electron on neutron scattering ​understanding of the basic principles that determine nuclear size, mass and decay modes ​knowledge of examples and applications of nuclear physics ​knowledge of elementary particles and their interactions ​basic understanding of relativistic 4-vectors
• ##### Working With Physics II (PHYS205)
Level 2 15 Whole Session 0:100 To develop essential research skills To use programming techniques to solve problems in Physics, Nuclear Physics, Astrophysics and/or meduical applciations of physics. To develop skills in modelling the solution to a problem To give students experience iof working in small groups to solve a problem To give students further experience of communicating their results using computer packages Knowledge of programming techniques in Matlab​The ability to solve problems using a computer program​ ​Mastered a basic set of research skills​Experience of working in a small group​​ ​Improved communication skills written, Oral and Poster
• ##### Mathematics for Physicists III (PHYS207)
Level 2 15 First Semester 70:30 To re-inforce students'' prior knowledge of mathematical techniques To introduce new mathematical techniques for physics modules To enhance students'' problem-solving abilities through structured application of these techniques in physics At the end of the module the student should be able to: Have knowledge of a range of mathematical techniques necessary for physics and astrophysics programmes Be able to apply these mathematical techniques in a range of physics and astrophysics programmes
• ##### Mathematics for Physicists IV (PHYS208)
Level 2 15 Second Semester 70:30 To re-inforce students'' prior knowledge of mathematical techniques To introduce new mathematical techniques for physics modules To enhance students'' problem-solving abilities through structured application of these techniques in physics At the end of the module the student should be able to: Have knowledge of a range of advanced mathematical techniques necessary for physics and astrophysics programmes Be able to apply these mathematical techniques in a range of physics and astrophysics programmes
• ##### Practical Astrophysics I (PHYS216)
Level 2 15 Whole Session 0:100 Setting up and calibrating equipment Become familiar with equipment used in later modules Taking reliable and reproducible data Develop understanding of various techniques of data gathering and analysis in modern astrophysics Calculating experimental results and their associated uncertainties Using computer software, including specific astrophysical software, to analyse data Writing a coherent account of the experimental procedure and conclusions Understanding physics in depth by performing specific experiments Developing practical, technical and computing skills required for later modules Improved practical skills and experience.​A detailed understanding of the fundamental physics and/or astrophysics behind the experiments.​Increased confidence in setting up and calibrating equipment. ​Familiarity with IT package for calculating, displaying and presenting results​Familiarity with subject specific astrophysics data analysis software. ​Enhanced ability to plan, execute and report the results of an investigation. ​Knowledge of the methods employed in the detection and analysis of light at optical wavelengths from astrophysical sources. ​A clear understanding of the methods employed in astronomical photometry and spectroscopy. ​Experience of the acquisition, reduction and analysis of astronomical data.

### Programme Year Three

The third year comprises a mix of core modules and many optional modules in Physics. You will undertake a research project with a member of staff ,

#### Year Three Compulsory Modules

• ##### Stellar Physics (PHYS351)
Level 3 15 First Semester 70:30 To provide students with an understanding of the physical processes which determine all aspects of the structure and evolution of stars, from their birth to their death. To enable students to determine the basic physical properties of stars via observation (e.g. determination of temperatures, masses and radii etc. using continuum fluxes, broad-band colours, line profiles etc). At the end of the module the student should have knowledge of how the basic physical properties of stars can be determined from observation.At the end of the module the student should have ​an understanding of how stellar structure can be probed using observable quantities and simple physical principles.​​At the end of the module a student should have an understanding of the changes in structure and energy sources for stars throughout their lives.​
• ##### Quantum Mechanics and Atomic Physics (PHYS361)
Level 3 15 First Semester 100:0 To build on the second year module on Quantum and Atomic Physics To develop the formalism of quantum mechanics To develop an understanding that atoms are quantum systems To enable the student to follow elementary quantum mechanical arguments in the literature ​Understanding of the role of wavefunctions, operators, eigenvalue equations, symmetries, compatibility/non-compatibility of observables and perturbation theory in quantum mechanical theory.​An ability to solve straightforward problems - different bound states and perturbing interactions.​​Developed knowledge and understanding of the quantum mechanical description of atoms - single particle levels, coupled angular momentum, fine structure, transition selection rules.​​Developed a working knowledge of interactions, electron configurations and coupling in atoms.​
• ##### Advanced Observational Astronomy (PHYS362)
Level 3 15 Second Semester 100:0 To introduce students to the experimental techniques which enable astrophysicists to use the full range of the electromagnetic spectrum to study the physics of astronomical objects. To become familiar with the design of telescopes across the electromagnetic spectrum. To understand the physical basis of light detection across the spectrum. To understand observing techniques such as photometry, spectroscopy, adaptive optics, interferometry. Understand and be able to compare and contrast the basic techniques and problems involved in observing all wavelengths of the electromagnetic spectrum ​Understand and be able to use and experimental concepts, as applied to observational astrophysics, of signal-to-noise ratio, sampling, resolution. ​Be able to determine the observing technique most appropriate for a given scientific goal​Be able to plan observations at a variety of wavelengths
• ##### Physics of Galaxies (PHYS373)
Level 3 15 First Semester 70:30 To provide students with a broad overview of these complex yet fundamental systems which interact at one end with the physics of stars and the interstellar medium and at the other with cosmology and the nature of large-scale structures in the Universe To develop in students an understanding of how the various distinct components in galaxies evolve and interact Interpret physically the properties of normal galaxies along the Hubble sequenceAccount for the stellar, gas, dust and dark matter content of galaxies Describe the formation and evolution of galaxies in a cosmological context.Analyze the structure and dynamics of galaxies and clusters of galaxies, using advanced classical mechanics and Newtonian gravity.Apply fundamental physics to calculate the dynamical state of groups and clusters of galaxies, their intracluster gas, and their dark matter content. ​Describe large-scale structure in the Universe, the nature of the first galaxies, and their implications for dark matter and cosmology.​Identify, summarise and present the content of research papers relevant for the field of galactic astronomy
• ##### Relativity and Cosmology (PHYS374)
Level 3 15 Second Semester 80:20 To introduce the ideas of general relativity and demonstrate its relevance to modern astrophysics To provide students with a full and rounded introduction to modern observational cosmology To develop the basic theoretical background required to understand and appreciate the significance of recent results from facilities such as the Hubble Space Telescope and the Wilkinson Microwave Anisotropy Probe ​The ability to explain the relationship between Newtonian gravity and Einstein''s General Relativity (GR) ​Understanding of the concept of curved space time and knowledge of metrics​.​ A broad and up-to-date knowledge of the basic ideas, most important discoveries and outstanding problems in modern cosmology​.​Knowledge of how simple cosmological models of the universe are constructed​.The ability to calculate physical parameters and make observational predictions for a range of such models.
• ##### Nuclear Physics (PHYS375)
Level 3 7.5 First Semester 100:0 To build on the second year module involving Nuclear Physics To develop an understanding of the modern view of nuclei, how they are modelled and of nuclear decay processes At the end of the module the student should have: Knowledge of evidence for the shell model of nuclei, its development and the successes and failures of the model in explaining nuclear properties ​Knowledge of the collective vibrational and rotational models of nuclei ​Basic knowledge of nuclear decay processes, alpha decay and fission, of gamma-ray transitions and internal conversion ​Knowledge of electromagnetic transitions in nuclei
• ##### Introduction to Particle Physics (PHYS377)
Level 3 7.5 Second Semester 100:0 To build on the second year module involving Nuclear and Particle Physics To develop an understanding of the modern view of particles, of their interactions and the Standard Model At the end of the module the student should have: Basic understanding of relativistic kinematics (as applied to collisions, decay processes and cross sections) ​Descriptive knowledge of the Standard Model using a non rigorous Feynman diagram approach​Knowledge of the fundamental particles of the Standard Model and the experimental evidence for the Standard Model ​Knowledge of conservation laws and discrete symmetries

#### Year Three Optional Modules

• ##### Condensed Matter Physics (PHYS202)
Level 2 15 First Semester 70:30 ​ The aims of Phys202 are to introduce the most important and basic concepts in condensed matter physics relating to the different materials we commonly see in the world around us. Condensed matter physics is one of the most active areas of research in modern physics, whose scope is extremely broad. The ultimate aim of this course is to introduce its central ideas and methodology to the students. Condensed matter refers to both liquids and solids and all kinds of other forms of matter in between those two extremes, generally known as “soft matter". While the course will touch on liquids, the emphasis will be on crystalline solids, including some nano-materials. The reason for focusing on crystals is that the periodicity of a crystal is what allows us to make progress in developing a theory for various phenomena in solids based on first principles. Two important concepts are: • the electronic states of electrons in a solid and • the vibrations of atoms in the solid. The description of these ideas basically refer to the theory of electronic band structure and the theory of phonons. These concepts form the basis for understanding a wide range of phenomena including how the atoms bond together to form the crystal, what are some basic statistical properties like specific heat, how electrons move in solids and electronic transport, why are some materials metals and others semiconductors and insulators, and how do solids interact with electromagnetic fields. The course will also introduce optical and magnetic properties in solids, scattering phenomena, thermal conductivity and effect of defects in solids, semiconductors, magnetism and go beyond the free electron model to touch on intriguing effects such as superconductivity. On satisfying the requirements of this course, students will have the knowledge and skills to understand the basic concepts of bonding in solids, establish an understanding of electron configuration in atoms and in the condensed matter in terms of bonding, and relating them to band structure description.​Students will be able to understand how solid structures are described mathematically and how material properties can be predicted​. ​Students will be able to establish a foundation in basic crystallography, using Bragg''s law, and understand the concept of the reciprocal lattice.​Students will understand basic transport properties, both electronic and thermal, in solids.​ Students will understand the concept of electron and hole carrier statistics, effective masses and transport in intrinsic and extrinsic semiconductors​Students will learn the basics of magnetism, the atomic origin and classical treatment of diamagnetism and paramagnetism, quantization of angular momentum and Hund''s rule, and introduced to weak magnetism in solids.​​Students will become familiar to the general language of condensed matter physics, key theories and concepts, ultimately enebling them to read and understand research papers.
• ##### Project (BSc) (PHYS379)
Level 3 15 Second Semester 0:100 To give students experience of working independently on an original physics-based or physics-related problem To give students an opportunity to display the high quality of their work To give students an opportunity to display qualities such as initiative and ingenuity To improve students ability to keep daily records of the work in hand and its outcomes To give students experience of report writing displaying high standards of composition and production To give an opportunity for students to display communication skills ​​​ At the end of the module the student should have: Experience of participation in planning all aspects of the work; Improved skills and initiative in carrying out investigations to test a hypothesisExperience researching literature and other sources of relevant information;Encountered research-led material​Improved ability to organise and manage time; Improved skills in making up a diary recording day by day progress of the project​​Improved skills in report writing, and the clear and accurate communication of scientific informationImproved skills in the critical analysis of an experiment or an investigation​ and setting them in context​Improved skills in preparing and delivering oral presentations​ and the defence of the results of the project
• ##### Group Physics Project (PHYS395)
Level 3 15 Second Semester 0:100 To give students an insight into applied or academic research​To help students gain a better understanding of the needs of industry and academia and the opportunities available to them as physicists ​To give students experience in team work and project management ​To encourage self-assessment ​To improve communication with clients and with research collaborators An understanding and experience of team work.​An ability to work in a team to carryout a research project set by a sponsor. ​​​An understanding of how to obtain information, evaluate its relevance, write a scientific report and present a poster covering the relevant material. ​​An appreciation of the need to collaborate in order to satisfy a client''s requirements.
Level 3 15 Second Semester 0:100 To provide undergraduates with key transferable skills. To provide students with opportunity to learn to communicate physics at different levels. To provide students with work-place experience. To provide students with the opportunity to work with staff in a different environment with different priorities to the University. To provide teaching experience that encourages undergraduates to consider a career in teaching. To supply role models for secondary school students. To provide support and teaching assistance to secondary school teachers. To encourage a new generation of physicists. Communicate physicseffectively to others​​Plan a lessonDesign a worksheet​​Evaluate their planning​Assess the effectiveness of a session or worksheet that they have designed​Manage small groups ofpupils (e.g. to complete an experiment)​​Prioritise their work​
• ##### Accelerators and Radioisotopes in Medicine (PHYS246)
Level 2 15 Second Semester 100:0 To introduce the students to ionising and non ionising radiation including its origins and production. To introduce the various ways in which radiation interacts with materials. To introduce the different accelerators and isotopes used in medicine and to give examples of their use. A basic knowledge of the origins of radiation and its properties.​​An understanding of ways in which radiation interacts with materials.​An understanding of how accelerators operate and how isotopes are produced.​Knowledge of applications of the use of accelerators and isotopes in medicine.​​​
• ##### Stellar Atmospheres (PHYS352)
Level 3 7.5 Second Semester 80:20 ​To provide students with an understanding of the properties of the light emitted by stars, of the effect of expanding atmospheres and of the relevance for Supernovae.To enable students to determine the basic physical properties of stars from observational data (e.g. Temp, Radius, Mass, composition) and the properties of expanding media (stellar winds: velocity, mass-loss rate; Supernovae: velocity, mass, kinetic energy, nucleosynthesis) Knowledge of how the physical properties of stars and supernovae can be determined from spectroscopic observations.​An understanding of how the interaction between radiation and matter determines the observable properties of stars. ​An understanding of how radiation propagates through a medium (a gas), affecting its properties
• ##### Planetary Physics (PHYS355)
Level 3 7.5 Second Semester 70:30 To demonstrate the application of basic physical principles to the understanding of planetary sience.To provide a background in Geophysics and solar system planetary science towards the understanding of exoplanet system research. To introduce methods of exoplanet detection, and current physical understanding of exoplanet systems Understanding of the principles of physics applied to understanding the interior of the Earth.​Understanding of theories of solar system formation and evolution, including orbital evolution.​Understanding of models of the interiors, atmospheres and magnetospheres of planets in the solar system.​Understanding and application of methods of exoplanet detection.​Understanding methods of planetary study of non-solar system bodies.
Level 3 15 Second Semester 100:0 To build on first and second year modules on electricity, magnetism and waves by understanding a range of electromagnetic phenomena in terms of Maxwell''s equations. To understand the properties of solutions to the wave equation for electromagnetic fields in free space, in matter (non-dispersive and dispersive dielectrics, and conductors). To understand the behaviour of electromagnetic waves at boundaries.To understand the behaviour of electromagnetic waves in cavities, waveguides and transmission lines. To understand the properties of electric dipole radiation. To introduce an explicity covariant formulation of electromagnetism in special relativity. To further develop students'' problem-solving and analytic skills. ​Students should have an understanding of the properties of solutions to the wave equation for electromagnetic fields in free space and in matter (non-dispersive and dispersive dielectrics, and conductors).​Students should have an understanding of the behaviour of electromagnetic waves at boundaries.​Students should have an understanding of the behaviour of electromagnetic waves in cavities, waveguides and transmission lines.​Students should have an understanding of the properties of electric dipole radiation.​Students should have the ability to explain an explicity covariant formulation of electromagnetism in special relativity.
• ##### Surface Physics (PHYS381)
Level 3 7.5 Second Semester 100:0 Develop a syllabus to describe the properties of surfacesConvey an understanding of the physical properties of SurfacesProvide knowledge  of a raneg of surface characterisation techniquesIllustrate surface processes and their relevance to technologies explain how the presence of the surface alters physical properties such as atomic an electronic structure​ choose the right characterisation technique to assess different surface properties have gained an  appreciation of surface processes and their relevance to the modification of surface properties​be able to describe surface alterations and processes using the right terminology
• ##### Physics of Life (PHYS382)
Level 3 7.5 Second Semester 100:0 To introduce students to the physical principles needed to address important problems such as climate change, the loss of biodiversity, the understanding of ecological systems, the growth of resistance to antibiotics, the challenge of sustainable development and the study of disease. These problems offer excellent opportunities for rewarding careers.​ ​ ​An understanding of the conditions necessary for life to evolve in a universe.​​An understanding of the thermodynamics and organization of living things.​​​​​Familiarity with physical techniques used in the study of biological systems. ​
• ##### Materials Physics (PHYS387)
Level 3 7.5 First Semester 100:0 To teach the properties and methods of preparation of a range of materials of scientific and technological importance To develop an understanding of the experimental techniques of materials characterisation To introduce materials such as amorphous solids, liquid crystals and polymers and to develop an understanding of the relationship between structure and physical properties for such materials To illustrate the concepts and principles by reference to examples At the end of the module the student should have: An understanding of the atomic structure in cyrstalline and amorphous materials Knowledge of the methods used for preparing single crystals and amorphous materials Knowledge of the experimental techniques used in materials characterisation Knowledge of the physical properties of superconducting materials An appreciation of the factors involved in the design of biomaterials The ability to interpret simple phase diagrams of binary systems
• ##### Physics of Energy Sources (PHYS388)
Level 3 15 Second Semester 100:0 To develop an ability which allows educated and well informed opinions to be formed by the next generation of physicists on a wide range of issues in the context of the future energy needs of man To describe and understand methods of utilising renewable energy sources such as hydropower, tidal power, wave power, wind power and solar power. To give knowledge and understanding of the design and operation of nuclear reactors To give knowledge and understanding of nuclear fusion as a source of power To give knowledge and understanding relevant to overall safety in the nuclear power industry To describe the origin of environmental radioactivity and understand the effects of radiation on humans At the end of the module the student should have: Learned the fundamental physical principles underlying energy production using conventional and renewable energy sources Learned the fundamental physical principles underlying nuclear fission and fusion reactors Studied the applications of these principles in the design issues power generation An appreciation of the role of mathematics in modelling power generation Learned the fundamental physical principles concerning the origin and consequences of environmental radioactivity Developed an awareness of the safety issues involved in exposure to radiation Developed problem solving skills based on the material presented Developed an appreciation of the problems of supplying the required future energy needs and the scope and issues associated with the different possible methods
• ##### Semiconductor Applications (PHYS389)
Level 3 7.5 First Semester 100:0 To develop the physics concepts describing semiconductors in sufficient details for the purpose of understanding the construction and operation of common semiconductor devices At the end of the module the student should have: Knowledge of the basic theory of p-n junctions Knowledge of the structure and function of a variety of semiconductor devices An overview of semiconductor device manufacturing processes Knowledge of the basic processes involved in the interaction of radiation with matter Understanding the application of semiconductors in Nuclear and Particle physics
• ##### Communicating Science (PHYS391)
Level 3 7.5 First Semester 0:100 To improve science students'' skills in communicating scientific information in a wide range of contexts To develop students'' understanding of some concepts of: Science in general Their particular area of science Other areas of science ​ An ability to communicate more confidently​​ An understanding of some of the key factors in successfulcommunication​An appreciation of the needs of different audiences​​Experience of a variety of written and oral media​​A broader appreciation of science and particular areas ofscience​
• ##### Practical Astrophysics II (PHYS394)
Level 3 15 First Semester 0:100 To provide practice in the planning and execution of a programme of astronomical observations To provide training in the application of astronomical co-ordinate systems To provide competence in the handling of a large astronomical telescope To gain experience in making, calibrating and analysing astronomical measurements using a CCD camera and spectrometer To gain experience in preparing a written report based on the results of astronomical work At the end of the module the student should have: The ability to plan and execute a simple programme of astronomical observations and measurements Familiarity with astronomical coordinate systems and the ability to find astronomical objects in the sky Skills in pointing and adjusting a large, manually controlled astronomical telescope The ability to take, reduce and analyse astronomical data to produce physically meaningful information. Experience of observing at a professional high-altitude observatory Experience of preparing a written report based on the results of astronomical work

The programme detail and modules listed are illustrative only and subject to change.

#### Teaching and Learning

Our research-led teaching ensures you are taught the latest advances in cutting-edge physics research. Lectures introduce and provide the details of the various areas of physics and related subjects. You will be working in tutorials and problem-solving workshops, which are another crucial element in the learning process, where you put your knowledge into practice. They help you to develop a working knowledge and understanding of physics. All of the lecturers also perform world class research and use this to enhance their teaching.

Most work takes place in small groups with a tutor or in a larger class where staff provide help as needed. Practical work is an integral part of the programmes, and ranges from training in basic laboratory skills in the first two years to a research project in the third or fourth year. You will undertake an extended project on a research topic with a member of staff who will mentor you. By the end of the degree you will be well prepared to tackle problems in any area and present yourself and your work both in writing and in person. In the first two years students take maths modules which provide the support all students need to understand the physics topics.