Publications
2013
Feasibility of Monitoring Mechanical Machining with a Chromatically Addressed Optical Fibre Photoelastic Sensor
Garza, C., Jones, G. R., Hon, K. K. B., Deakin, A. G., & Spencer, J. W. (2013). Feasibility of Monitoring Mechanical Machining with a Chromatically Addressed Optical Fibre Photoelastic Sensor. Strain, 49(1), 68-74. doi:10.1111/str.12014
2012
Development of a 1:1 scale true perception virtual reality system for design review in automotive industry
Shao, F., Robotham, A. J., & Hon, K. K. B. (2012). Development of a 1:1 scale true perception virtual reality system for design review in automotive industry. In 26th ICMR (pp. 7 pages). Birmingham: N/A.
Modeling and Simulation of Shot Peening Process
Zhang, X. J., Wang, J. B., Levers, A., & Hon, K. K. B. (2012). Modeling and Simulation of Shot Peening Process. In 37th MATADOR Conference (pp. 4). Manchester: N/A.
Structure and output mechanisms in Design for Environment (DfE) tools
Birch, A., Hon, K. K. B., & Short, T. D. (2012). Structure and output mechanisms in Design for Environment (DfE) tools. Journal of Cleaner Production, 35, 50-58.
2011
A Virtual Assembly Approach for Product Assemblability Analysis
Ding, Z. Y., Hon, K. K. B., & Shao, F. (2011). A Virtual Assembly Approach for Product Assemblability Analysis. In 21st CIRP Design Conference (pp. 5). Daejeon: KAIST.
Improving the Output Performance of Design for Environment Tools
Birch, A., Short, T., & Hon, K. K. B. (2011). Improving the Output Performance of Design for Environment Tools. In 21st Intnational Conference on Production Research (pp. 6). Stuttgart: Fraunhofer-Verlag.
Virtual Engineering Centre - Examples of Virtual Prototyping and Multidisciplinary Design Optimization
Cooper, J. E., & al, E. (2011). Virtual Engineering Centre - Examples of Virtual Prototyping and Multidisciplinary Design Optimization. In Virtual Prototyping of Affordable Military Vehicles Using Advanced MDO (pp. 1-28). Sofia, Bulgaria: NATO.
2010
Measurement of Mechanical Strain Using Chromatic Monitoring of Photoelasticity
Garza, C., Deakin, A. G., Jones, G. R., Spencer, J. W., & Hon, K. K. B. (n.d.). Measurement of Mechanical Strain Using Chromatic Monitoring of Photoelasticity. In Applied Mechanics and Materials Vol. 24-25 (pp. 123-128). Trans Tech Publications, Ltd.. doi:10.4028/www.scientific.net/amm.24-25.123
Managing advanced manufacturing technology (AMT) implementation in manufacturing SMEs
Fulton, M., & Hon, B. (2010). Managing advanced manufacturing technology (AMT) implementation in manufacturing SMEs. International Journal of Productivity and Performance Management, 59(4), 351-371. doi:10.1108/17410401011038900
Active Learning of Manufacturing Systems Behaviour
Hon, K. K. B. (2010). Active Learning of Manufacturing Systems Behaviour. In International CDIO Conference (pp. 8). Montreal: �cole Polytechnique de Montréal.
Design and modelling of a passive wireless pressure sensor
Zhai, J., How, T. V., & Hon, B. (2010). Design and modelling of a passive wireless pressure sensor. CIRP Annals, 59(1), 187-190. doi:10.1016/j.cirp.2010.03.103
Generating improvements through the comparison of four DFE tools.
Birch, A., Hon, K. K. B., & Short, T. D. (2010). Generating improvements through the comparison of four DFE tools.. In 5th International Conference on Responsive Manufacturing: 'Green Manufacturing' (pp. 5). Ningbo: unknown.
Managing AMT Implementation in Manufacturing SMEs
Fulton, M., & Hon, K. K. B. (2010). Managing AMT Implementation in Manufacturing SMEs. Int. J. Productivity and Performance Management, 59(4), 351-371.
Measurement of Mechanical Strain Using Chromatic Monitoring of Photoelasticity
Garza, C., Deakin, A. G., Jones, G. R., Spencer, J. W., & Hon, K. K. B. (2010). Measurement of Mechanical Strain Using Chromatic Monitoring of Photoelasticity. Advances in Experimental Mechanics, 24-25, 123-128.
2009
Active Learning of Creativity through Clay-Modelling
Hon, K. K. B., Dickson, D., & Harris, D. (2009). Active Learning of Creativity through Clay-Modelling. In 5th International CDIO Conference (pp. 10). Singapore: Singapore Polytechnic.
Proceedings of the 5th International CDIO Conference
Crawley, E. (Ed.) (2009). Proceedings of the 5th International CDIO Conference. In 5th International CDIO Conference (pp. 6). Singapore: Singapore Polytechnic.
2008
Approximation of curved trajectories for tool path generation
Lopez Jaquez, K. F. J., & Hon, K. K. B. (2008). Approximation of curved trajectories for tool path generation. In 40th Int Seminar on Manufacturing Systems (pp. 6 pages). Liverpool: Elsevier (in press).
Control and Improvement of Manufacturing Systems via Performance Management
Serna, G., & Hon, K. K. B. (2008). Control and Improvement of Manufacturing Systems via Performance Management. In 40th Int Seminar on Manufacturing Systems (pp. 6 pages). Liverpool: Elsevier (in press).
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008). Direct writing technology—Advances and developments. CIRP Annals, 57(2), 601-620. doi:10.1016/j.cirp.2008.09.006
2007
Impact of Product Life Cycle on Manufacturing Systems Reconfiguration
Hon, K. K. B., & Xu, S. (2007). Impact of Product Life Cycle on Manufacturing Systems Reconfiguration. CIRP Annals, 56(1), 455-458. doi:10.1016/j.cirp.2007.05.109
2006
An Investigation of Tool Chip Contact Phenomena in High-Speed Turning Using Coated Tools
Mativenga, P. T., Abukhshim, N. A., Sheikh, M. A., & Hon, B. K. K. (2006). An Investigation of Tool Chip Contact Phenomena in High-Speed Turning Using Coated Tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(5), 657-667. doi:10.1243/09544054jem351
Computer modelling of an xy-table
Lopez Jaquez, K. F. J., & Hon, K. K. B. (2006). Computer modelling of an xy-table. In M. Morgan (Ed.), 4th International Conference on Manufacturing Research (pp. 8). Liverpool: LJMU.
Impact of High Speed Machining on Computing and Automation
Hon, K. K. B., & Baharudin, B. T. H. T. (2006). Impact of High Speed Machining on Computing and Automation. Int J Automation & Control, 3(1), 63-68.
Investigations on new scanning pattern for stereolithography
Hon, K. K. B., Han, C., & Edwardson, S. P. (2006). Investigations on new scanning pattern for stereolithography. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 55(1), 217-220. doi:10.1016/S0007-8506(07)60402-8
Performance framework for manufacturing systems
Serna, G., & Hon, K. K. B. (2006). Performance framework for manufacturing systems. In P. Butala, & G. Hlebanja (Eds.), 39th Int Manufacturing Systems Seminar (pp. 4). Ljubljana: University of Ljubljana.
2005
An Experimental Study of Cutting Forces in High-Speed End Milling and Implications for Dynamic Force Modeling
Mativenga, P. T., & Hon, K. K. B. (2005). An Experimental Study of Cutting Forces in High-Speed End Milling and Implications for Dynamic Force Modeling. Journal of Manufacturing Science and Engineering, 127(2), 251-261. doi:10.1115/1.1863254
Wear and cutting forces in high-speed machining of H13 using physical vapour deposition coated carbide tools
Mativenga, P. T., & Hon, K. K. B. (2005). Wear and cutting forces in high-speed machining of H13 using physical vapour deposition coated carbide tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219(2), 191-199. doi:10.1243/95440505x8127
A Multiagent Approach on Product Knowledge Extraction System
Li, C. R., & Hon, K. K. B. (2005). A Multiagent Approach on Product Knowledge Extraction System. In P. J. Sackett (Ed.), 3rd International Conference on Manufacturing Research (pp. 6). Cranfield: Cranfield University.
Microsystems packaging- The new economic driver (Keynote Paper)
Hon, K. K. B. (2005). Microsystems packaging- The new economic driver (Keynote Paper). In J. A. McGeough (Ed.), 19th Int Conference on Computer-Aided Production Engineering (pp. 8). Melbourne: Edinburgh University Press.
Performance and Evaluation of Manufacturing Systems (Keynote Paper)
Hon, K. K. B. (2005). Performance and Evaluation of Manufacturing Systems (Keynote Paper). Annals of CIRP, 52(2), 675-690. Retrieved from http://www.cirp.net/
2004
Experimental investigation into the selective laser sintering of silicon carbide polyamide composites
Gill, T. J., & Hon, K. K. B. (2004). Experimental investigation into the selective laser sintering of silicon carbide polyamide composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(10), 1249-1256. doi:10.1243/0954405042323487
Design and Manufacture for Sustainable Development 2004
Bhamra, T., & Hon, K. K. B. (2004). Design and Manufacture for Sustainable Development 2004. London: Professional Engineering Publishing.
Design and Manufacture for Sustainable Development 2004
Bhamra, T., & Hon, K. K. B. (Eds.) (2004). Design and Manufacture for Sustainable Development 2004. London: Professional Engineering Publications.
Knowledge Brokering for Assisting the Generation of Automotive Product Design
Hon, K. K. B., & Zeiner, J. (2004). Knowledge Brokering for Assisting the Generation of Automotive Product Design. Annals of CIRP, 53(1), 159-162.
2003
A study of cutting forces and surface finish in high-speed machining of AISI H13 tool steel using carbide tools with TiAIN based coatings
Mativenga, P. T., & Hon, K. K. B. (2003). A study of cutting forces and surface finish in high-speed machining of AISI H13 tool steel using carbide tools with TiAIN based coatings. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217(2), 143-151. doi:10.1243/095440503321148786
Design and Manufacture for Sustainable Development 2003
Hon, K. K. B. (Ed.) (2003). Design and Manufacture for Sustainable Development 2003. London: Professional Engineering Publications.
Design and Manufacture for Sustainable Development 2003
Hon, K. K. B. (2003). Design and Manufacture for Sustainable Development 2003. London: Professional Engineering Publishing.
Selective laser sintering of SiC/Polyamide composites
Hon, K. K. B., & Gill, T. J. (2003). Selective laser sintering of SiC/Polyamide composites. Annals of CIRP, 52(1), 173-176.
2002
Configuration of Manufacturing Cells for Dynamic Manufacturing
Hon, K. K. B., & Lopez-Jaquez, F. J. (2002). Configuration of Manufacturing Cells for Dynamic Manufacturing. CIRP Annals, 51(1), 391-394. doi:10.1016/s0007-8506(07)61544-3
Design and Manufacture for Sustainable Development
Hon, K. K. B. (Ed.) (2002). Design and Manufacture for Sustainable Development. London: Professional Engineering Publications.
Design and Manufacture for Sustainable Development
Hon, K. K. B. (2002). Design and Manufacture for Sustainable Development. London: Professional Engineering Publishing.
Sustainable Product Development (Keynote Address)
Hon, K. K. B. (2002). Sustainable Product Development (Keynote Address). In W. B. Li (Ed.), 10th International Manufacturing Confernce in China (pp. 6). Xiaman: Xiaman University.
2001
Improving Stereolithography Part Accuracy for Industrial Applications
Onuh, S. O., & Hon, K. K. B. (2001). Improving Stereolithography Part Accuracy for Industrial Applications. The International Journal of Advanced Manufacturing Technology, 17(1), 61-68. doi:10.1007/s001700170210
Integration of Rapid Prototyping Technology into FMS for Agile Manufacturing
Onuh, S. O., & Hon, K. K. B. (2001). Integration of Rapid Prototyping Technology into FMS for Agile Manufacturing. Int Journal of Integrated manufacturing Systems, 12(3), 179-186.
1997
Interactive Programmable Feature Recognisor
Gibson, P., Ismail, H. S., Sabin, M., & Hon, K. K. B. (1997). Interactive Programmable Feature Recognisor. Annals of the CIRP 1997, 46, 150-153.
1996
Automated Design of Progressive Dies
Huang, K., Ismail, H. S., & Hon, K. K. B. (1996). Automated Design of Progressive Dies. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 210(4), 367-376. doi:10.1243/pime_proc_1996_210_130_02
1995
The Nesting of Two-Dimensional Shapes Using Genetic Algorithms
Ismail, H. S., & Hon, K. K. B. (1995). The Nesting of Two-Dimensional Shapes Using Genetic Algorithms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 209(2), 115-124. doi:10.1243/pime_proc_1995_209_063_02
Intelligent Object Oriented Design of Progressive Press Tools
Ismail, H. S., Hon, K. K. B., & Huang, K. (1995). Intelligent Object Oriented Design of Progressive Press Tools. Annals of the CIRP, 44, 91-96.
1992
New approaches for the nesting of two-dimensional shapes for press tool design
Ismail, H. S., & Hon, K. K. B. (1992). New approaches for the nesting of two-dimensional shapes for press tool design. International Journal of Production Research, 30(4), 825-837. doi:10.1080/00207543.1992.9728459