2023
Effect of NaCl and SO<sub>2</sub> on the stress corrosion cracking of CMSX-4 at 550°C (Journal article)
Duarte Martinez, F., Syed, A., Dawson, K., Tatlock, G. J., Morar, N. I., Kothari, M., . . . Castelluccio, G. M. (2023). Effect of NaCl and SO<sub>2</sub> on the stress corrosion cracking of CMSX-4 at 550°C. MATERIALS AT HIGH TEMPERATURES, 40(4), 283-295. doi:10.1080/09603409.2023.2205760DOI: 10.1080/09603409.2023.2205760
Dawson, K., Duarte-Martinez, F., Gray, S., Nicholls, J., Gibson, G., Leggett, J., & Tatlock, G. J. (2023). Environmentally assisted cracking of a single crystal nickel-based superalloy. MATERIALS AT HIGH TEMPERATURES, 40(4), 296-307. doi:10.1080/09603409.2023.2182587DOI: 10.1080/09603409.2023.2182587
2020
Brooking, L., Gray, S., Dawson, K., Nicholls, J. R., Simms, N. J., Sumner, J., & Tatlock, G. J. (2020). Analysis of combined static load and low temperature hot corrosion induced cracking in CMSX-4 at 550 °C. CORROSION SCIENCE, 163. doi:10.1016/j.corsci.2019.108293DOI: 10.1016/j.corsci.2019.108293
Void formation during cyclic oxidation of oxide dispersion strengthened FeCrAl alloys (Journal article)
Dryepondt, S., Thiesing, B. P., Tatlock, G. J., & Jones, A. R. (n.d.). Void formation during cyclic oxidation of oxide dispersion strengthened FeCrAl alloys. Materials at High Temperatures. doi:10.1080/09603409.2020.1771657DOI: 10.1080/09603409.2020.1771657
2019
Karfoul, M. K., & Tatlock, G. J. (2019). Interfacial processes during diffusion welding of titanium alloy/aluminium couples under ambient atmosphere. WELDING IN THE WORLD, 63(3), 841-849. doi:10.1007/s40194-019-00711-6DOI: 10.1007/s40194-019-00711-6
2018
Arnold, K., Tatlock, G., Kenel, C., Colella, A., & Matteazzi, P. (2018). High temperature isothermal oxidation behaviour of an oxide dispersion strengthened derivative of IN625. Materials at High Temperatures, 35(1-3), 141-150. doi:10.1080/09603409.2017.1393145DOI: 10.1080/09603409.2017.1393145
Microscopy of Oxidation 10 PREFACE (Book)
Tatlock, G. J., & Evans, I. E. (2018). Microscopy of Oxidation 10 PREFACE (Vol. 35). doi:10.1080/09603409.2017.1419604DOI: 10.1080/09603409.2017.1419604
Heil, T., & Tatlock, G. J. (2018). Noise reduction in CCD measurements by improving the quality of dark-reference images. MICROSCOPY, 67. doi:10.1093/jmicro/dfy006DOI: 10.1093/jmicro/dfy006
2017
Kenel, C., Lis, A., Dawson, K., Stiefel, M., Pecnik, C., Barras, J., . . . Wegener, K. (2017). Mechanical performance and oxidation resistance of an ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing. INTERMETALLICS, 91, 169-180. doi:10.1016/j.intermet.2017.09.004DOI: 10.1016/j.intermet.2017.09.004
Kenel, C., Dawson, K., Barras, J., Hauser, C., Dasargyri, G., Bauer, T., . . . Wegener, K. (2017). Microstructure and oxide particle stability in a novel ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing. Intermetallics, 90, 63-73. doi:10.1016/j.intermet.2017.07.004DOI: 10.1016/j.intermet.2017.07.004
Duffield, M. E., Tatlock, G. J., & Lewis, J. F. (2017). High-Temperature Decomposition of Fe- and Cr-Doped NiO Produced by a Novel Flame Spray Technique. OXIDATION OF METALS, 88(3-4), 351-360. doi:10.1007/s11085-017-9747-zDOI: 10.1007/s11085-017-9747-z
Dawson, K., & Tatlock, G. J. (2017). The influence of deformation, annealing and recrystallisation on oxide nanofeatures in oxide dispersion strengthened steel. JOURNAL OF NUCLEAR MATERIALS, 486, 361-368. doi:10.1016/j.jnucmat.2017.01.034DOI: 10.1016/j.jnucmat.2017.01.034
2016
Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel (Journal article)
Boegelein, T., Louvis, E., Dawson, K., Tatlock, G. J., & Jones, A. R. (2016). Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel. MATERIALS CHARACTERIZATION, 112, 30-40. doi:10.1016/j.matchar.2015.11.021DOI: 10.1016/j.matchar.2015.11.021
High resolution microstructural studies of the evolution of nano-scale, yttrium-rich oxides in ODS steels subjected to ball milling, selective laser melting or friction stir welding (Conference Paper)
Tatlock, G. J., Dawson, K., Boegelein, T., Moustoukas, K., & Jones, A. R. (2016). High resolution microstructural studies of the evolution of nano-scale, yttrium-rich oxides in ODS steels subjected to ball milling, selective laser melting or friction stir welding. In MATERIALS TODAY-PROCEEDINGS Vol. 3 (pp. 3086-3093). Retrieved from https://www.webofscience.com/
2015
Herodotou, S., Treharne, R. E., Durose, K., Tatlock, G. J., & Potter, R. J. (2015). The Effects of Zr Doping on the Optical, Electrical and Microstructural Properties of Thin ZnO Films Deposited by Atomic Layer Deposition. Materials, 8(10), 7230-7240. doi:10.3390/ma8105369DOI: 10.3390/ma8105369
Role of Y-Al Oxides During Extended Recovery Process of a Ferritic ODS Alloy (Journal article)
Capdevila, C., Pimentel, G., Aranda, M. M., Rementeria, R., Dawson, K., Urones-Garrote, E., . . . Miller, M. K. (2015). Role of Y-Al Oxides During Extended Recovery Process of a Ferritic ODS Alloy. JOM, 67(10), 2208-2215. doi:10.1007/s11837-015-1559-5DOI: 10.1007/s11837-015-1559-5
Nano-Particle Precipitation in Mechanically Alloyed and Annealed Precursor Powders of Legacy PM2000 ODS Alloy (Journal article)
Dawson, K., Haigh, S., Tatlock, G., & Jones, A. (2015). Nano-Particle Precipitation in Mechanically Alloyed and Annealed Precursor Powders of Legacy PM2000 ODS Alloy. Journal of Nuclear Materials, 464, 200-209. doi:10.1016/j.jnucmat.2015.04.039DOI: 10.1016/j.jnucmat.2015.04.039
Recovery and recrystallisation in mechanically alloyed and annealed, legacy, FeCrAlY ODS alloy precursor powders (Conference Paper)
Dawson, K., Rao, A., Tatlock, G. J., & Jones, A. R. (2015). Recovery and recrystallisation in mechanically alloyed and annealed, legacy, FeCrAlY ODS alloy precursor powders. In 36TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE Vol. 89. doi:10.1088/1757-899X/89/1/012020DOI: 10.1088/1757-899X/89/1/012020
Preparation of micro-foils for TEM/STEM analysis from metallic powders (Journal article)
Dawson, K., & Tatlock, G. J. (2015). Preparation of micro-foils for TEM/STEM analysis from metallic powders. MICRON, 74, 54-58. doi:10.1016/j.micron.2015.04.006DOI: 10.1016/j.micron.2015.04.006
Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y<sub>2</sub>O<sub>3</sub> ferritic steels fabricated by spark plasma sintering (Journal article)
Zhang, H., Huang, Y., Ning, H., Williams, C. A., London, A. J., Dawson, K., . . . Grant, P. S. (2015). Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y<sub>2</sub>O<sub>3</sub> ferritic steels fabricated by spark plasma sintering. JOURNAL OF NUCLEAR MATERIALS, 464, 61-68. doi:10.1016/j.jnucmat.2015.04.029DOI: 10.1016/j.jnucmat.2015.04.029
Mechanical Response and Deformation Mechanisms of Ferritic Oxide Dispersion Strengthened Steel Structures Produced by Selective Laser Melting (Journal article)
Boegelein, T., Dryepondt, S., Pandey, A., Dawson, K., & Tatlock, G. (2015). Mechanical Response and Deformation Mechanisms of Ferritic Oxide Dispersion Strengthened Steel Structures Produced by Selective Laser Melting. Acta Materialia, 87, 201-215. doi:10.1016/j.actamat.2014.12.047DOI: 10.1016/j.actamat.2014.12.047
2014
Friction stir welding of PM2000 ODS alloy (Journal article)
Dawson, K., Cater, S., Tatlock, G. J., & Stanhope, C. (2014). Friction stir welding of PM2000 ODS alloy. Materials Science and Technology, 30(13), 1685-1690. doi:10.1179/1743284714y.0000000553DOI: 10.1179/1743284714y.0000000553
'Characterisation of nano-sized oxides in ODM401 ODS steel'. (Journal article)
Dawson, K., & Tatlock, G. J. (2014). 'Characterisation of nano-sized oxides in ODM401 ODS steel'.. Journal of Nuclear Materials, 444, 252-260.
Characterisation of nanosized oxides in ODM401 oxide dispersion strengthened steel (Journal article)
Dawson, K., & Tatlock, G. J. (2014). Characterisation of nanosized oxides in ODM401 oxide dispersion strengthened steel. Journal of Nuclear Materials, 444(1-3), 252-260. doi:10.1016/j.jnucmat.2013.10.003DOI: 10.1016/j.jnucmat.2013.10.003
Friction stir welding of PM2000 ODS alloy (Journal article)
Dawson, K., Cater, S., Tatlock, G. J., & Stanhope, C. (2014). Friction stir welding of PM2000 ODS alloy. MATERIALS SCIENCE AND TECHNOLOGY, 30(13B), 1685-1690. doi:10.1179/1743284714Y.0000000553DOI: 10.1179/1743284714Y.0000000553
2013
Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT (Journal article)
Dawson, K. E., Tatlock, G. J., Chi, K., & Barnard, P. (2013). Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A(11), 5065-5080. doi:10.1007/s11661-013-1880-yDOI: 10.1007/s11661-013-1880-y
Friction stir welding of steel: A process update (Journal article)
Cater, S. S., Galloway, A. M., McPherson, N. A., Steel, R., Tatlock, G., & Dawson, K. (2013). Friction stir welding of steel: A process update. Welding and Cutting, 12(4), 268-276.
2012
Analysis of the Reactive Element Effect on the Oxidation of Ceria Doped Nickel (Journal article)
Jackson, R. W., Leonard, J. P., Niewolak, L., Quadakkers, W. J., Murray, R., Romani, S., . . . Meier, G. H. (2012). Analysis of the Reactive Element Effect on the Oxidation of Ceria Doped Nickel. Oxidation of Metals, 78(3-4), 197-210. doi:10.1007/s11085-012-9300-zDOI: 10.1007/s11085-012-9300-z
Characterisation of the coke formed during the metal dusting of low alloy steels (Journal article)
Potter, D. J., Tatlock, G. J., & Romani, S. (2012). Characterisation of the coke formed during the metal dusting of low alloy steels. Materials at High Temperatures, 29(2), 123-128. doi:10.3184/096034012x13323259039546DOI: 10.3184/096034012x13323259039546
2011
Observations of native oxides on ion beam polished heterogeneous Cr-Mo weld TEM foil specimens (Journal article)
Dawson, K., & Tatlock, G. J. (2011). Observations of native oxides on ion beam polished heterogeneous Cr-Mo weld TEM foil specimens. MATERIALS AT HIGH TEMPERATURES, 28(4), 259-263. doi:10.3184/096034011X13182565389960DOI: 10.3184/096034011X13182565389960
'Creep strenghtening nano-precipitate distributions in the carbon depleted region of dissimilar ferritic power plant steel welds' (Conference Paper)
Dawson, K., & Tatlock, G. J. (2011). 'Creep strenghtening nano-precipitate distributions in the carbon depleted region of dissimilar ferritic power plant steel welds'. In 8th International Charles Parsons turbine conference' (pp. 1-5). Portsmouth: Io3M.
'On the stabilisation of ultra-fine subgrain microstructures within carbon depleted regions of dissimilar metal ferritic creep resistant welds' (Conference Paper)
Dawson, K., & Tatlock, G. J. (2011). 'On the stabilisation of ultra-fine subgrain microstructures within carbon depleted regions of dissimilar metal ferritic creep resistant welds'. In Pressure Vessel and Pipeline Steels 2011 Vol. 57868 (pp. 1-9). New York: ASME.
'Selective laser melting of ODS steels' (Conference Paper)
Boegelein, T., Jones, A. R., Rao, A., & Tatlock, G. J. (2011). 'Selective laser melting of ODS steels'. In Pressure Vessel and Pipeline Steels 2011 Vol. 57892 (pp. 1-10). New York: ASME.
Ch 2 Introduction to Electron Optics (Chapter)
Tatlock, G. J. (2011). Ch 2 Introduction to Electron Optics. In R. M. Drummond-Brydson (Ed.), Aberration-Corrected Analytical Transmission Electron Microscopy (pp. 21-38). Chichester: John Wiley.
Boegelein, T., Rao, A., Jones, A. R., & Tatlock, G. J. (2011). Selective Laser Melting of Oxide Dispersion Strengthened Steels. (ASME 2011 Pressure Vessels and Piping Conference). Retrieved from http://dx.doi.org/10.1115/pvp2011-57892DOI: 10.1115/pvp2011-57892
The Stability of Fine, Sub-Grain Microstructures Within Carbon Depleted Regions of Dissimilar Metal, Ferritic, Creep Resistant Welds (Conference Paper)
Dawson, K., & Tatlock, G. J. (2011). The Stability of Fine, Sub-Grain Microstructures Within Carbon Depleted Regions of Dissimilar Metal, Ferritic, Creep Resistant Welds. In Volume 6: Materials and Fabrication, Parts A and B. ASMEDC. doi:10.1115/pvp2011-57868DOI: 10.1115/pvp2011-57868
2010
High Temperature Corrosion of Low Alloy Steels (Chapter)
Pinder, L. W., Dawson, K., & Tatlock, G. J. (2010). High Temperature Corrosion of Low Alloy Steels. In SHREIR'S CORROSION, VOL 1: BASIC CONCEPTS, HIGH TEMPERATURE CORROSION (pp. 558-582). Retrieved from https://www.webofscience.com/
Microstructural evolution in friction stir welding of nanostructured ODS alloys (Journal article)
Chen, C. -L., Tatlock, G. J., & Jones, A. R. (2010). Microstructural evolution in friction stir welding of nanostructured ODS alloys. Journal of Alloys and Compounds, 504, S460-S466. doi:10.1016/j.jallcom.2010.02.192DOI: 10.1016/j.jallcom.2010.02.192
Effect of Strain Heterogeneity on the Recrystallization Behavior of an Oxide Dispersion Strengthened Ferritic Alloy (Journal article)
Chen, C. L., Tatlock, G. J., & Jones, A. R. (n.d.). Effect of Strain Heterogeneity on the Recrystallization Behavior of an Oxide Dispersion Strengthened Ferritic Alloy. Materials Science Forum, 638-642, 3833-3838. doi:10.4028/www.scientific.net/msf.638-642.3833DOI: 10.4028/www.scientific.net/msf.638-642.3833
The Oxidation Resistance of Low Alloy Steels (Chapter)
Pinder, L. W., Dawson, K., & Tatlock, G. (2010). The Oxidation Resistance of Low Alloy Steels. In M. J. Graham, & H. F. Stott (Eds.), Shreir's Corrosion (Vol. 1, pp. 558-582). Amsterdam: Elsevier.
2009
High spatial resolution imaging of the segregation of reactive elements to oxide grain boundaries in alumina scales (Journal article)
Tatlock, G. J., Ram, D., & Wang, P. (2009). High spatial resolution imaging of the segregation of reactive elements to oxide grain boundaries in alumina scales. Materials at High Temperatures, 26(3), 293-298. doi:10.3184/096034009x463899DOI: 10.3184/096034009x463899
Phase transformations in yttrium –aluminium oxides in friction stir welded and recrystallised PM2000 alloys (Journal article)
Chen, C. -L., Wang, P., & Tatlock, G. J. (2009). Phase transformations in yttrium –aluminium oxides in friction stir welded and recrystallised PM2000 alloys. Materials at High Temperatures, 26(3), 299-303. doi:10.3184/096034009x465211DOI: 10.3184/096034009x465211
Improvements in honeycomb abradable seals (Journal article)
Potter, D. J., Chai, Y. W., & Tatlock, G. J. (2009). Improvements in honeycomb abradable seals. Materials at High Temperatures, 26(2), 127-135. doi:10.3184/096034009x464302DOI: 10.3184/096034009x464302
'Summary of Prior Work on the Joining of Oxide-Dispersion-Strengthened Alloys' (Report)
Wright, I. G., Tatlock, G. J., Al-Badairy, H., & Chen, C. -L. (2009). 'Summary of Prior Work on the Joining of Oxide-Dispersion-Strengthened Alloys'. Oak Ridge: ORNL.
Effect of annealing temperatures on the secondary re-crystallization of extruded PM2000 steel bar. (Journal article)
Chen, C. -L., Tatlock, G. J., & Jones, A. R. (2009). Effect of annealing temperatures on the secondary re-crystallization of extruded PM2000 steel bar.. Journal of microscopy, 233(3), 474-481. doi:10.1111/j.1365-2818.2009.03134.xDOI: 10.1111/j.1365-2818.2009.03134.x
Microscopy of Oxidation 7 (Book)
Tatlock, G. J., & Evans, H. E. (Eds.) (2009). Microscopy of Oxidation 7. London: Science Reviews.
2008
Void formation and filling under alumina scales formed on Fe–20Cr–5Al based alloys and coatings, oxidised at temperatures up to 1200 °C (Journal article)
Potter, D. J., Al‐Badairy, H., Tatlock, G. J., & Bennett, M. J. (2008). Void formation and filling under alumina scales formed on Fe–20Cr–5Al based alloys and coatings, oxidised at temperatures up to 1200 °C. Materials and Corrosion, 59(5), 414-422. doi:10.1002/maco.200804124DOI: 10.1002/maco.200804124
'TEM and STEM Investigation of Friction Stir Welded FeCrAl ODS Alloys' (Journal article)
Chen, C. L., Al-Badairy, H., Tatlock, G. J., Jones, A. R., & McColvin, G. (2008). 'TEM and STEM Investigation of Friction Stir Welded FeCrAl ODS Alloys'. Proc. 7th Intl. Friction Stir Welding Symposium, Japan.
2007
Pulsed Plasma-Assisted Diffusion Bonding of Oxide Dispersion-Strengthened–FeCrAl Alloys (Journal article)
Tatlock, G. J., Dyadko, E. G., Dryepondt, S. N., & Wright, I. G. (2007). Pulsed Plasma-Assisted Diffusion Bonding of Oxide Dispersion-Strengthened–FeCrAl Alloys. Metallurgical and Materials Transactions A, 38(7), 1663-1665. doi:10.1007/s11661-007-9233-3DOI: 10.1007/s11661-007-9233-3
The behaviour of iron and aluminium during the diffusion welding of carbon steel to aluminium (Journal article)
Karfoul, M. K., Tatlock, G. J., & Murray, R. T. (2007). The behaviour of iron and aluminium during the diffusion welding of carbon steel to aluminium. Journal of Materials Science, 42(14), 5692-5699. doi:10.1007/s10853-006-0742-zDOI: 10.1007/s10853-006-0742-z
'Control of Defects and Microstructure in ODS Alloys' (Conference Paper)
Tatlock, G. J., Al-Badairy, H., Chen, C. L., & Jones, A. R. (2007). 'Control of Defects and Microstructure in ODS Alloys'. In 21st Conference on Fossil Energy Materials (pp. 94-101). Knoxville: US Department of Energy.
'Enabling the Practical Application of Oxide Dispersion-Strengthened Ferritic Steels' (Conference Paper)
Wright, I. G., Pint, B. A., Dyadko, E. G., Bornstein, N. E., & Tatlock, G. J. (2007). 'Enabling the Practical Application of Oxide Dispersion-Strengthened Ferritic Steels'. In 21st Conference on Fossil Energy Materials (pp. 77-93). Knoxville: US Department of Energy.
'The Influence of Metal Surface Roughness on the Diffusion Welding of Carbon Steel to Aluminium' (Conference Paper)
Karfoul, M. K., Tatlock, G. J., & Murray, R. T. (2007). 'The Influence of Metal Surface Roughness on the Diffusion Welding of Carbon Steel to Aluminium'. In 8th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding (pp. 65-71). Aachen: DVS.
2006
Microstructural development of α alumina scales developed on FeCrAl alloys (Journal article)
Prior, D. J., Al-Badairy, H., Seward, G. G. E., Veltkamp, C. J., & Tatlock, G. J. (2006). Microstructural development of α alumina scales developed on FeCrAl alloys. Materials Science and Technology, 22(11), 1316-1324. doi:10.1179/174328406x131091DOI: 10.1179/174328406x131091
Evidence for Cr-carbide formation at the scale/metal interface during oxidation of FeCrAl alloys (Journal article)
Kochubey, V., Naumenko, D., Wessel, E., Le Coze, J., Singheiser, L., Al-Badairy, H., . . . Quadakkers, W. J. (2006). Evidence for Cr-carbide formation at the scale/metal interface during oxidation of FeCrAl alloys. Materials Letters, 60(13-14), 1654-1658. doi:10.1016/j.matlet.2005.11.087DOI: 10.1016/j.matlet.2005.11.087
Examination of high temperature FeCrAl(RE) alloys using FEG-SEM and STEM techniques (Journal article)
Al-Badairy, H., Prior, D. J., Tatlock, G. J., Le Coze, J., & Jones, A. R. (2006). Examination of high temperature FeCrAl(RE) alloys using FEG-SEM and STEM techniques. Matériaux & Techniques, 94(4), 253-259. doi:10.1051/mattech:2007001DOI: 10.1051/mattech:2007001
2005
The effect of gas composition and contaminants on the lifetime of surface-treated FeCrAlRE alloys (Journal article)
Tatlock, G. J., Al-Badairy, H., Bachorczyk-Nagy, R., & Fordham, R. (2005). The effect of gas composition and contaminants on the lifetime of surface-treated FeCrAlRE alloys. Materials and Corrosion, 56(12), 867-873. doi:10.1002/maco.200503917DOI: 10.1002/maco.200503917
Segregation of reactive elements at oxide grain boundaries in FeCrAlRE alloys (Journal article)
Ram, D. L., Tatlock, G. J., & Falke, U. (2005). Segregation of reactive elements at oxide grain boundaries in FeCrAlRE alloys. Materials at High Temperatures, 22(3), 497-503. doi:10.3184/096034005782744254DOI: 10.3184/096034005782744254
Air oxidation of commercial FeCrAlRE alloy foils between 800 and 950°C (Journal article)
Tatlock, G. J., Al-Badairy, H., Bennett, M. J., Newton, R., Nicholls, J. R., & Galerie, A. (2005). Air oxidation of commercial FeCrAlRE alloy foils between 800 and 950°C. Materials Science and Technology, 21(8), 893-900. doi:10.1179/174328405x46123DOI: 10.1179/174328405x46123
Joining of ODS-FeCrAl Alloys by Pulsed Plasma-Assisted Diffusion Bonding (Journal article)
Kochubey, V., Al-Badairy, H., Tatlock, G. J., Le-Coze, J., Naumenko, D., & Quadakkers, W. J. (2005). Joining of ODS-FeCrAl Alloys by Pulsed Plasma-Assisted Diffusion Bonding. Materials and Corrosion, 56(12), 848-853. doi:10.10070/s11661-007-9233-3DOI: 10.10070/s11661-007-9233-3
1986
A Mössbauer study of ferrihydrite and aluminium substituted ferrihydrites (Journal article)
Chadwick, J., Jones, D. H., Thomas, M. F., Tatlock, G. J., & Devenish, R. W. (1986). A Mössbauer study of ferrihydrite and aluminium substituted ferrihydrites. Journal of Magnetism and Magnetic Materials, 61(1-2), 88-100. doi:10.1016/0304-8853(86)90070-3DOI: 10.1016/0304-8853(86)90070-3
A Mössbauer study of magnetic relaxation and the Morin transition in amorphous and crystalline iron oxide systems (Journal article)
Chadwick, J., Jones, D. H., Thomas, M. F., Tatlock, G. J., & Devenish, R. W. (1986). A Mössbauer study of magnetic relaxation and the Morin transition in amorphous and crystalline iron oxide systems. Journal of Magnetism and Magnetic Materials, 59(3-4), 301-308. doi:10.1016/0304-8853(86)90425-7DOI: 10.1016/0304-8853(86)90425-7