2023
Li, X., Patterson, E., Wang, W. -C., & Christian, W. (n.d.). Prediction of residual strains due to in-plane fibre waviness in defective carbon-fibre reinforced polymers using ultrasound data. Journal of Nondestructive Evaluation.
2022
Patterson, E. A., Lambros, J., Magana-Carranza, R., & Sutcliffe, C. J. (2022). Residual stress effects during additive manufacturing of reinforced thin nickel-chromium plates. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 123(5-6), 1845-1857. doi:10.1007/s00170-022-10256-6DOI: 10.1007/s00170-022-10256-6
Patterson, E. A., Diamantakos, I., Dvurecenska, K., Greene, R. J., Hack, E., Lampeas, G., . . . Siebert, T. (2022). Validation of a structural model of an aircraft cockpit panel: An industrial case study. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 57(8), 714-723. doi:10.1177/03093247211059084DOI: 10.1177/03093247211059084
Giorgi, F., Curran, J. M., & Patterson, E. A. (2022). Real-time monitoring of the dynamics and interactions of bacteria and the early-stage formation of biofilms. SCIENTIFIC REPORTS, 12(1). doi:10.1038/s41598-022-22669-0DOI: 10.1038/s41598-022-22669-0
Amjad, K., Lambert, P., Middleton, C. A., Greene, R. J., & Patterson, E. A. (2022). A thermal emissions-based real-time monitoring system for in situ detection of fatigue cracks. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 478(2266). doi:10.1098/rspa.2021.0796DOI: 10.1098/rspa.2021.0796
Bowman, D., Dwyer, L., Levers, A., Patterson, E. A., Purdie, S., & Vikhorev, K. (2022). A Unified Approach to Digital Twin Architecture-Proof-of-Concept Activity in the Nuclear Sector. IEEE ACCESS, 10, 44691-44709. doi:10.1109/ACCESS.2022.3161626DOI: 10.1109/ACCESS.2022.3161626
Patterson, E. A., & Hack, E. (2022). Validating out of the box: Identifying a campaign of physical tests. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN. doi:10.1177/03093247221138344DOI: 10.1177/03093247221138344
2021
Comparing full-field data from structural components with complicated geometries (Journal article)
Christian, W. J. R., Dean, A. D., Dvurecenska, K., Middleton, C. A., & Patterson, E. A. (2021). Comparing full-field data from structural components with complicated geometries. ROYAL SOCIETY OPEN SCIENCE, 8(9). doi:10.1098/rsos.210916DOI: 10.1098/rsos.210916
Magana Carranza, R., Robinson, J., Ashton, I., Fox, P., Sutcliffe, C., & Patterson, E. (n.d.). A novel device for in-situ force measurements during laser powder bed fusion (L-PBF). Rapid Prototyping Journal. doi:10.1108/rpj-12-2020-0305DOI: 10.1108/rpj-12-2020-0305
Magana-Carranza, R., Sutcliffe, C., & Patterson, E. (2021). The effect of processing parameters and material properties on residual forces induced in Laser Powder Bed Fusion (L-PBF). Additive Manufacturing. doi:10.1016/j.addma.2021.102192DOI: 10.1016/j.addma.2021.102192
Middleton, C., Lambert, P. R., Greene, R. J., Kupferschmid, A., Hack, E., Michel, S., . . . Patterson, E. A. (2021, June 15). Using COTS technology for Structural Health Monitoring in airframes during large-scale testing. In European Test and Telemetry Conference 2021. Online.
Dvurecenska, K., Diamantakos, I., Hack, E., Lampeas, G., Patterson, E. A., & Siebert, T. (2021). The validation of a full-field deformation analysis of an aircraft panel: A case study. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 56(4), 265-272. doi:10.1177/0309324720971140DOI: 10.1177/0309324720971140
Alexiadis, A., Ferson, S., & Patterson, E. A. (2021). Transformation of measurement uncertainties into low-dimensional feature vector space. ROYAL SOCIETY OPEN SCIENCE, 8(3). doi:10.1098/rsos.201086DOI: 10.1098/rsos.201086
Patterson, E., Siebert, T., Hack, E., Lampeas, G., & Splitthof, K. (2021). Uncertainty Quantification for DIC Displacement Measurements in Industrial Environments. Experimental Techniques: a publication for the practicing engineer. doi:10.1007/s40799-021-00447-3DOI: 10.1007/s40799-021-00447-3
Giorgi, F., Curran, J. M., Gilliland, D., La Spina, R., Whelan, M., & Patterson, E. A. (2021). Limitations of Nanoparticles Size Characterization by Asymmetric Flow Field-Fractionation Coupled with Online Dynamic Light Scattering. CHROMATOGRAPHIA, 84(2), 199-206. doi:10.1007/s10337-020-03997-7DOI: 10.1007/s10337-020-03997-7
Patterson, E. A., Whelan, M. P., & Worth, A. P. (2021). The role of validation in establishing the scientific credibility of predictive toxicology approaches intended for regulatory application.. Computational toxicology (Amsterdam, Netherlands), 17, 100144. doi:10.1016/j.comtox.2020.100144DOI: 10.1016/j.comtox.2020.100144
Giorgi, F., Macko, P., Curran, J. M., Whelan, M., Worth, A., & Patterson, E. A. (2021). Settling dynamics of nanoparticles in simple and biological media. ROYAL SOCIETY OPEN SCIENCE, 8(11). doi:10.1098/rsos.210068DOI: 10.1098/rsos.210068
Patterson, E. A. (2021). Using everyday engineering examples to engage learners on a massive open online course. INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING EDUCATION, 49(1), 3-24. doi:10.1177/0306419018818551DOI: 10.1177/0306419018818551
2020
Patterson, E., Middleton, C., Weihrauch, M., Christian, W., & Greene, R. (n.d.). Detection and tracking of cracks based on thermoelastic stress analysis. Royal Society Open Science.
A probabilistic metric for the validation of computational models (Journal article)
Dvurecenska, K., Graham, S., Patelli, E., & Patterson, E. (2020). A probabilistic metric for the validation of computational models. Royal Society Open Science, 5(11). doi:10.1098/rsos.180687DOI: 10.1098/rsos.180687
Lo, I. -H., Yeh, T. -K., Patterson, E. A., & Tzelepi, A. (2020). Comparison of oxidation behaviour of nuclear graphite grades at very high temperatures. Journal of Nuclear Materials, 532, 152054. doi:10.1016/j.jnucmat.2020.152054DOI: 10.1016/j.jnucmat.2020.152054
Real-time quantification of damage in structural materials during mechanical testing (Journal article)
Christian, W. J. R., Dvurecenska, K., Amjad, K., Pierce, J., Przybyla, C., & Patterson, E. A. (2020). Real-time quantification of damage in structural materials during mechanical testing. ROYAL SOCIETY OPEN SCIENCE, 7(3). doi:10.1098/rsos.191407DOI: 10.1098/rsos.191407
Computationally efficient method of tracking fibres in composite materials using digital image correlation (Journal article)
Amjad, K., Christian, W., Dvurecenska, K., Chapman, M. G., Uchic, M. D., Przybyla, C., & Patterson, E. A. (2020). Computationally efficient method of tracking fibres in composite materials using digital image correlation. Composites Part A: Applied Science and Manufacturing, 129. doi:10.1016/j.compositesa.2019.105683DOI: 10.1016/j.compositesa.2019.105683
Dvurecenska, K., Hack, E., Lampeas, G., Siebert, T., & Patterson, E. (2020). Comparative study of orthogonal decomposition of surface deformation in composite automotive panel. In ECCM 2018 - 18th European Conference on Composite Materials.
Creating fibre-waviness defects in laminates and predicting their remnant strength using a strain-based non-destructive evaluation technique (Conference Paper)
Christian, W. J. R., Diazdelao, F. A., Atherton, K., & Patterson, E. A. (2020). Creating fibre-waviness defects in laminates and predicting their remnant strength using a strain-based non-destructive evaluation technique. In ECCM 2018 - 18th European Conference on Composite Materials.
Creating fibre-waviness defects in laminates and predicting their remnant strength using a strain-based non-destructive evaluation technique (Conference Paper)
Christian, W. J. R., Diazdelao, F. A., Atherton, K., & Patterson, E. A. (2020). Creating fibre-waviness defects in laminates and predicting their remnant strength using a strain-based non-destructive evaluation technique. In ECCM 2018 - 18th European Conference on Composite Materials.
Creating fibre-waviness defects in laminates and predicting their remnant strength using a strain-based non-destructive evaluation technique (Conference Paper)
Christian, W. J. R., Diazdelao, F. A., Atherton, K., & Patterson, E. A. (2020). Creating fibre-waviness defects in laminates and predicting their remnant strength using a strain-based non-destructive evaluation technique. In ECCM 2018 - 18th European Conference on Composite Materials.
Santos Silva, C., Lambros, J., Garner, D., & Patterson, E. A. (2020). Dynamic Response of a Thermally Stressed Platewith Reinforced Edges. Experimental Mechanics, 60, 81-92. doi:10.1007/s11340-019-00536-wDOI: 10.1007/s11340-019-00536-w
Weihrauch, M., Middleton, C., Greene, R., & Patterson, E. (2020). Low-Cost Thermoelastic Stress Analysis. In Unknown Conference (pp. 15-19). Springer International Publishing. doi:10.1007/978-3-030-30098-2_3DOI: 10.1007/978-3-030-30098-2_3
2019
Dvurecenska, K., Graham, S., Patelli, E., & Patterson, E. A. (2019). A probabilistic metric for the validation of computational models (vol 5, 180687, 2018). ROYAL SOCIETY OPEN SCIENCE, 6(12). doi:10.1098/rsos.191986DOI: 10.1098/rsos.191986
Hack, E., Dvurecenska, K., Lampeas, G., Patterson, E., Siebert, T., & Szigeti, E. (2019). Incorporating historical data in a validation process. In BSSM 14th International Conference on Advances in Experimental Mechanics. Belfast.
Dvurecenska, K., Patelli, E., & Patterson, E. (2019). Probabilistic metric for validation based on strain field data. In BSSM 14th International Conference on Advances in Experimental Mechanics. Belfast.
Patterson, E., Lampeas, G., & Hack, E. (2019). Round robin results for CWA16799:2014 - validation of computational solid mechanics models. In BSSM 14th International conference on Advances in Experimental Mechanics. Belfast.
Patterson, E., Lampeas, G., Diamantakos, I., Siebert, T., & Hack, E. (2019). Uncertainty quantification of digital image correlation measurements based on projected speckle patterns. In 9th International Conference of the European Aeronautics Science Network. Athens, Greece.
Giorgi, F., Coglitore, D., Curran, J., Gilliland, D., Macko, P., Whelan, M., . . . Patterson, E. A. (2019). The influence of inter-particle forces on diffusion at the nanoscale. Scientific Reports, 9(1). doi:10.1038/s41598-019-48754-5DOI: 10.1038/s41598-019-48754-5
Middleton, C. A., McCrory, J. P., Greene, R. J., Holford, K., & Patterson, E. A. (2019). Detecting and Monitoring Cracks in Aerospace Materials Using Post-Processing of TSA and AE Data. METALS, 9(7). doi:10.3390/met9070748DOI: 10.3390/met9070748
Christian, W. J. R., Dvurecenska, K., Amjad, K., Przybyla, C., & Patterson, E. A. (2019). Machine vision characterisation of the 3D microstructure of ceramic matrix composites. JOURNAL OF COMPOSITE MATERIALS, 53(16), 2285-2296. doi:10.1177/0021998319826355DOI: 10.1177/0021998319826355
Patterson, E. A., & Whelan, M. P. (2019). On the validation of variable fidelity multi-physics simulations. JOURNAL OF SOUND AND VIBRATION, 448, 247-258. doi:10.1016/j.jsv.2019.01.051DOI: 10.1016/j.jsv.2019.01.051
Silva, A. C. S., Sebastian, C. M., Lambros, J., & Patterson, E. A. (2019). High temperature modal analysis of a non-uniformly heated rectangular plate: Experiments and simulations. JOURNAL OF SOUND AND VIBRATION, 443, 397-410. doi:10.1016/j.jsv.2018.11.041DOI: 10.1016/j.jsv.2018.11.041
Patterson, E. A., Paini, A., Leonard, J. A., Joosens, E., Bessems, J. G. M., Desalegn, A., . . . Tan, Y. M. (n.d.). Next generation physiologically based kinetic (NG-PBK) models in support of regulatory decision making. Computational Toxicology.
Lopez-Alba, E., Sebastian, C. M., Silva, A. C. S., & Patterson, E. A. (2019). Experimental study of mode shifting in an asymmetrically heated rectangular plate. JOURNAL OF SOUND AND VIBRATION, 439, 241-250. doi:10.1016/j.jsv.2018.09.044DOI: 10.1016/j.jsv.2018.09.044
Patterson, E. A., Purdie, S., Taylor, R. J., & Waldon, C. (2019). An integrated digital framework for the design, build and operation of fusion power plants. ROYAL SOCIETY OPEN SCIENCE, 6(10). doi:10.1098/rsos.181847DOI: 10.1098/rsos.181847
Spencer, R. P., & Patterson, E. A. (2019). Observations of fatigue crack behaviour in proton-irradiated 304 stainless steel. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 42(9), 2120-2132. doi:10.1111/ffe.13087DOI: 10.1111/ffe.13087
Patterson, E. A., Sebastian, C., Christian, W., & Lopez-Alba, E. (n.d.). The use of CCD cameras for characterizing the mean deflected shape of an aerospace panel during broadband excitation. Journal of Strain Analysis for Engineering Design.
2018
MODELLING AND SIMULATION ACTIVITIES IN SUPPORT OF THE UK NUCLEAR R&D PROGRAMME ON DIGITAL REACTOR DESIGN (Conference Paper)
Lindley, B., Allen, D., Lillington, J., Smethurst, A., Smith, P., Bowman, D., . . . Eaton, M. D. (2018). MODELLING AND SIMULATION ACTIVITIES IN SUPPORT OF THE UK NUCLEAR R&D PROGRAMME ON DIGITAL REACTOR DESIGN. In PROCEEDINGS OF THE 26TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2018, VOL 3. Retrieved from https://www.webofscience.com/
Middleton, C. A., Gaio, A., Greene, R., & Patterson, E. (2018). An automated approach to crack-tip tracking using thermoelastic stress analysis. In European Conference on Non-Destructive Testing 2018. Gothenburg, Sweden.
Hack, E., Burguete, R., Dvurecenska, K., Lampeas, G., Patterson, E., Siebert, T., & Szigeti, E. (2018, July 1). Steps Towards Industrial Validation Experiments. In 18th International Conference on Experimental Mechanics Vol. 2 (pp. 391). Brussels, Belgium.
An experimental study on the manufacture and characterization of in-plane fibre-waviness defects in composites (Journal article)
Christian, W., DiazDelaO, F. A., Atherton, K., & Patterson, E. A. (2018). An experimental study on the manufacture and characterization of in-plane fibre-waviness defects in composites. Royal Society Open Science, 5(5). doi:10.1098/rsos.180082DOI: 10.1098/rsos.180082
Lo, I. -H., Tzelepi, A., Patterson, E. A., & Yeh, T. -K. (2018). A study of the relationship between microstructure and oxidation effects in nuclear graphite at very high temperatures. JOURNAL OF NUCLEAR MATERIALS, 501, 361-370. doi:10.1016/j.jnucmat.2018.01.048DOI: 10.1016/j.jnucmat.2018.01.048
Middleton, C. A., Gaio, A., Greene, R., & Patterson, E. (2018). Locating cracks in bolted double-lap joints using thermoelastic stress analysis. In PhotoMechanics 2018. Toulouse, France.
Christian, W. J. R., DiazDelaO, F. A., & Patterson, E. A. (2018). Strain-based damage assessment for accurate residual strength prediction of impacted composite laminates. Composite Structures, 184, 1215-1223. doi:10.1016/j.compstruct.2017.10.022DOI: 10.1016/j.compstruct.2017.10.022
The UK nuclear R&D programme on digital nuclear reactor design - modelling, simulation, and virtual engineering (Conference Paper)
Merk, B., Allen, D., Bankhead, M., Bowen, A., Bowman, D., De Haas, S., . . . Vikhorev, K. (2018). The UK nuclear R&D programme on digital nuclear reactor design - modelling, simulation, and virtual engineering. In Proceedings of the 2018 International Congress on Advances in Nuclear Power Plants, ICAPP 2018 (pp. 1085-1090).
2017
Coglitore, D., Edwardson, S., Macko, P., Patterson, E., & Whelan, M. (2017). Transition from fractional to classical Stokes-Einstein behaviour in simple fluids. Royal Society Open Science, 4(12). doi:10.1098/rsos.170507DOI: 10.1098/rsos.170507
Amjad, K., Asquith, D., Patterson, E. A., Sebastian, C. M., & Wang, W. C. (2017). The interaction of fatigue cracks with a residual stress field using thermoelastic stress analysis and synchrotron X-ray diffraction experiments. Royal Society Open Science, 4(11). doi:10.1098/rsos.171100DOI: 10.1098/rsos.171100
Patterson, E. A., & Whelan, M. P. (2017). A framework to establish credibility of computational models in biology. Progress in Biophysics and Molecular Biology, 129, 13-19. doi:10.1016/j.pbiomolbio.2016.08.007DOI: 10.1016/j.pbiomolbio.2016.08.007
Arnolds, H., Kakoulli, A., Shah, K., & Patterson, E. (2017). Characterization of metal fatigue by optical second harmonic generation. APPLIED PHYSICS LETTERS, 111(13). doi:10.1063/1.4995694DOI: 10.1063/1.4995694
Middleton, C. A., Gaio, A., Greene, R., Spencer, R., & Patterson, E. (2017). Automated crack tip tracking in stainless steel specimens using thermoelastic stress analysis. In BSSM 12th International Conference on Advances in Experimental Mechanics. Sheffield.
Christian, W., Patterson, E. A., & Diaz de la O, F. A. (2017). Robust Empirical Predictions of Residual Performance of Damaged Composites with Quantified Uncertainties. Journal of Nondestructive Evaluation, 36(2). doi:10.1007/s10921-017-0416-6DOI: 10.1007/s10921-017-0416-6
Sebastian, C. M., Lopez-Alba, E., & Patterson, E. A. (2017). A comparison methodology for measured and predicted displacement fields in modal analysis. JOURNAL OF SOUND AND VIBRATION, 400, 354-368. doi:10.1016/j.jsv.2017.03.024DOI: 10.1016/j.jsv.2017.03.024
Analysis of a Composite Pi/T-Joint Using an FE Model and DIC (Chapter)
Sebastian, C., Haq, M., & Patterson, E. (2017). Analysis of a Composite Pi/T-Joint Using an FE Model and DIC. In Joining Technologies for Composites and Dissimilar Materials, Volume 10 (pp. 11-19). Springer International Publishing. doi:10.1007/978-3-319-42426-2_2DOI: 10.1007/978-3-319-42426-2_2
Vasco-Olmo, J. M., Diaz, F. A., James, M. N., Christopher, C. J., & Patterson, E. A. (2017). Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields. FRATTURA ED INTEGRITA STRUTTURALE, (41), 166-174. doi:10.3221/IGF-ESIS.41.23DOI: 10.3221/IGF-ESIS.41.23
James, M. N., Christopher, C. J., Díaz Garrido, F. A., Vasco-Olmo, J. M., Kakiuchi, T., & Patterson, E. A. (n.d.). Interpretation of Plasticity Effects Using the CJP Crack Tip Field Model. In Solid State Phenomena Vol. 258 (pp. 117-124). Trans Tech Publications, Ltd.. doi:10.4028/www.scientific.net/ssp.258.117DOI: 10.4028/www.scientific.net/SSP.258.117
Modal shape measurement of large industrial components fringe projection with 2D-DIC (Conference Paper)
Felipe-Sesé, L., Patterson, E. A., & Díaz-Garrido, F. A. (2017). Modal shape measurement of large industrial components fringe projection with 2D-DIC. In 24th International Congress on Sound and Vibration, ICSV 2017.
Chang, Y. -H., Wang, W., Patterson, E. A., Chang, J. -Y., & Mottershead, J. E. (2017). Output-only full-field modal testing. In X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) Vol. 199 (pp. 423-428). doi:10.1016/j.proeng.2017.09.137DOI: 10.1016/j.proeng.2017.09.137
Preface (Conference Paper)
Cloud, G. L., Patterson, E. A., & Backman, D. (2017). Preface. In Conference Proceedings of the Society for Experimental Mechanics Series Vol. 10.
2016
Felipe-Sese, L., Diaz-Garrido, F. A., & Patterson, E. A. (2016). Exploiting measurement-based validation for a high-fidelity model of dynamic indentation of a hyperelastic material. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 97-98, 520-529. doi:10.1016/j.ijsolstr.2016.06.036DOI: 10.1016/j.ijsolstr.2016.06.036
Tan, X., Kang, Y., & Patterson, E. A. (2016). Experimental investigation on surface deformation of soft half plane indented by rigid wedge. APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 37(10), 1349-1360. doi:10.1007/s10483-016-2139-9DOI: 10.1007/s10483-016-2139-9
Vasco-Olmo, J. M., James, M. N., Christopher, C. J., Patterson, E. A., & Diaz, F. A. (2016). Assessment of crack tip plastic zone size and shape and its influence on crack tip shielding. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 39(8), 969-981. doi:10.1111/ffe.12436DOI: 10.1111/ffe.12436
Amjad, K., Wang, W. -C., & Patterson, E. (2016). A comparison of split sleeve cold expansion in thick and thin plates. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 51(5), 375-386. doi:10.1177/0309324716642621DOI: 10.1177/0309324716642621
Patterson, E. (2016). What's hot in strain analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 51(5), 335. doi:10.1177/0309324716650763DOI: 10.1177/0309324716650763
Buckling and delamination growth behaviour of delaminated composite panels subject to four-point bending (Journal article)
Gong, W., Chen, J., & Patterson, E. A. (2016). Buckling and delamination growth behaviour of delaminated composite panels subject to four-point bending. COMPOSITE STRUCTURES, 138, 122-133. doi:10.1016/j.compstruct.2015.11.054DOI: 10.1016/j.compstruct.2015.11.054
A framework for an integrated nuclear digital environment (Journal article)
Patterson, E. A., Taylor, R. J., & Bankhead, M. (2016). A framework for an integrated nuclear digital environment. Progress in Nuclear Energy, 87, 97-103. doi:10.1016/j.pnucene.2015.11.009DOI: 10.1016/j.pnucene.2015.11.009
Wang, D., Diaz De La O, F. A., Wang, W. V., Lin, X., Patterson, E., & Mottershead, J. (2016). Uncertainty quantification in DIC with Kriging regression. Optics and Lasers in Engineering, 78, 182-195. doi:10.1016/j.optlaseng.2015.09.006DOI: 10.1016/j.optlaseng.2015.09.006
Experimental evaluation of shielding effect on growing fatigue cracks under overloads using ESPI (Journal article)
Vasco-Olmo, J. M., Diaz, F. A., & Patterson, E. A. (2016). Experimental evaluation of shielding effect on growing fatigue cracks under overloads using ESPI. INTERNATIONAL JOURNAL OF FATIGUE, 83, 117-126. doi:10.1016/j.ijfatigue.2015.10.003DOI: 10.1016/j.ijfatigue.2015.10.003
High Temperature Vibratory Response of Hastelloy-X: Stereo-DIC Measurements and Image Decomposition Analysis (Journal article)
Berke, R. B., Sebastian, C. M., Chona, R., Patterson, E. A., & Lambros, J. (2016). High Temperature Vibratory Response of Hastelloy-X: Stereo-DIC Measurements and Image Decomposition Analysis. EXPERIMENTAL MECHANICS, 56(2), 231-243. doi:10.1007/s11340-015-0092-3DOI: 10.1007/s11340-015-0092-3
An evaluation of a protocol for the validation of computational solid mechanics models (Journal article)
Hack, E., Lampeas, G., & Patterson, E. A. (2016). An evaluation of a protocol for the validation of computational solid mechanics models. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 51(1), 5-13. doi:10.1177/0309324715616017DOI: 10.1177/0309324715616017
Preliminary validation of a micromechanistic model of nuclear graphite response (Conference Paper)
Dvurecenska, K., Tzelepi, A., Graham, S. J., Patelli, E., & Patterson, E. A. (2016). Preliminary validation of a micromechanistic model of nuclear graphite response. In INGSM.
Stereo-DIC Measurements of Thermal Gradient Effects on the Vibratory Response of Metals (Conference Paper)
Berke, R., Chona, R., Ding, A., Lambros, J., Patterson, E., & Sebastian, C. (2016). Stereo-DIC Measurements of Thermal Gradient Effects on the Vibratory Response of Metals. In ROTATING MACHINERY, HYBRID TEST METHODS, VIBRO-ACOUSTICS AND LASER VIBROMETRY, VOL 8 (pp. 35-41). doi:10.1007/978-3-319-30084-9_4DOI: 10.1007/978-3-319-30084-9_4
2015
Strain analysis in a post-modernist world (Journal article)
Patterson, E. (2015). Strain analysis in a post-modernist world. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 50(8), 559-560. doi:10.1177/0309324715613930DOI: 10.1177/0309324715613930
Challenges in experimental strain analysis: Interfaces and temperature extremes (Journal article)
Patterson, E. (2015). Challenges in experimental strain analysis: Interfaces and temperature extremes. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 50(5), 282-283. doi:10.1177/0309324715580722DOI: 10.1177/0309324715580722
A reference material for establishing uncertainties in full-field displacement measurements (Journal article)
Hack, E., Lin, X., Patterson, E., & Sebastian, C. (2015). A reference material for establishing uncertainties in full-field displacement measurements. Measurement Science and Technology, 26(7). doi:10.1088/0957-0233/26/7/075004DOI: 10.1088/0957-0233/26/7/075004
Growth of inclined fatigue cracks using the biaxial CJP model (Journal article)
Laboviciute, G., Christopher, C. J., James, M. N., & Patterson, E. A. (2015). Growth of inclined fatigue cracks using the biaxial CJP model. FRATTURA ED INTEGRITA STRUTTURALE, (33), 167-173. doi:10.3221/IGF-ESIS.33.21DOI: 10.3221/IGF-ESIS.33.21
On the credibility of engineering models and meta-models (Journal article)
Patterson, E. (2015). On the credibility of engineering models and meta-models. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 50(4), 218-220. doi:10.1177/0309324715577930DOI: 10.1177/0309324715577930
An experimental study of the behaviour of delaminations in composite panels subjected to bending (Journal article)
Gong, W., Chen, J., & Patterson, E. A. (2015). An experimental study of the behaviour of delaminations in composite panels subjected to bending. COMPOSITE STRUCTURES, 123, 9-18. doi:10.1016/j.compstruct.2014.12.008DOI: 10.1016/j.compstruct.2014.12.008
Cross links between computational and experimental mechanics (Journal article)
Patterson, E. (2015). Cross links between computational and experimental mechanics. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 50(3), 154-+. doi:10.1177/0309324714567073DOI: 10.1177/0309324714567073
Fifty years of quality assurance (Journal article)
Patterson, E. (2015). Fifty years of quality assurance. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 50(2), 74. doi:10.1177/0309324714565987DOI: 10.1177/0309324714565987
Guest editorial: characterisation of crack tip fields (Journal article)
James, M. N., Susmel, L., Iacoviello, F., Hong, Y., Patterson, E. A., & Lopez-Crespo, P. (2015). Guest editorial: characterisation of crack tip fields. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 38(2), 139. doi:10.1111/ffe.12213DOI: 10.1111/ffe.12213
Calibration of a Digital Image Correlation System (Journal article)
Sebastian, C., & Patterson, E. A. (2015). Calibration of a Digital Image Correlation System. EXPERIMENTAL TECHNIQUES, 39(1), 21-29. doi:10.1111/ext.12005DOI: 10.1111/ext.12005
Challenges in experimental strain analysis: Interfaces and temperature extremes (Journal article)
Patterson, E. (2015). Challenges in experimental strain analysis: Interfaces and temperature extremes. Journal of Strain Analysis for Engineering Design, 50(5), 282-283. doi:10.1177/030932471558072DOI: 10.1177/030932471558072
Guest Editorial: Characterisation of crack tip fields (Journal article)
James, M. N., Susmel, L., Iacoviello, F., Hong, Y., Patterson, E. A., & Lopez-Crespo, P. (2015). Guest Editorial: Characterisation of crack tip fields. INTERNATIONAL JOURNAL OF FATIGUE, 71, 1-2. doi:10.1016/j.ijfatigue.2014.04.002DOI: 10.1016/j.ijfatigue.2014.04.002
On the validation of solid mechanics models using optical measurements and data decomposition (Journal article)
Lampeas, G., Pasialis, V., Lin, X., & Patterson, E. A. (2015). On the validation of solid mechanics models using optical measurements and data decomposition. SIMULATION MODELLING PRACTICE AND THEORY, 52, 92-107. doi:10.1016/j.simpat.2014.12.006DOI: 10.1016/j.simpat.2014.12.006
Strain analysis before the computer (Journal article)
Patterson, E. (2015). Strain analysis before the computer. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 50(1), 2-3. doi:10.1177/0309324714564660DOI: 10.1177/0309324714564660
2014
Integrating fringe projection and digital image correlation for high-quality measurements of shape changes (Journal article)
Felipe-Sese, L., Siegmann, P., Diaz, F., & Patterson, E. (2014). Integrating fringe projection and digital image correlation for high-quality measurements of shape changes. Optical Engineering, 53(4). doi:10.1117/1.OE.53.4.044106DOI: 10.1117/1.OE.53.4.044106
A comparison of the effect of riveting and cold expansion on the strain distribution and fatigue performance of fiber metal laminates (Journal article)
Backman, D., & Patterson, E. A. (2014). A comparison of the effect of riveting and cold expansion on the strain distribution and fatigue performance of fiber metal laminates. Journal of Strain Analysis for Engineering Design, 49(3), 141-153. doi:10.1177/0309324713493082DOI: 10.1177/0309324713493082
An experimental study of the contact of a rounded rigid indenter with a soft material block (Journal article)
Tan, X., Kang, Y., & Patterson, E. A. (2014). An experimental study of the contact of a rounded rigid indenter with a soft material block. J. Strain Analysis for Engineering Design, 49(2), 112-121.
An experimental study of the contact of a rounded rigid indenter with a soft material block (Journal article)
Tan, X., Kang, Y., & Patterson, E. (2014). An experimental study of the contact of a rounded rigid indenter with a soft material block. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 49(2), 112-121. doi:10.1177/0309324713496406DOI: 10.1177/0309324713496406
Analysis of displacement fields from a high-speed impact using shape descriptors (Journal article)
Burguete, R. L., Lampeas, G., Mottershead, J. E., Patterson, E. A., Pipino, A., Siebert, T., & Wang, W. (2014). Analysis of displacement fields from a high-speed impact using shape descriptors. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 49(4), 212-223. doi:10.1177/0309324713498074DOI: 10.1177/0309324713498074
Simultaneous in-and-out-of-plane displacement measurements using fringe projection and digital image correlation (Journal article)
Felipe-Sese, L., Siegmann, P., Diaz, F. A., & Patterson, E. A. (2014). Simultaneous in-and-out-of-plane displacement measurements using fringe projection and digital image correlation. OPTICS AND LASERS IN ENGINEERING, 52, 66-74. doi:10.1016/j.optlaseng.2013.07.025DOI: 10.1016/j.optlaseng.2013.07.025
2013
Model Updating Using Shape Descriptors from Full-Field Images (Conference Paper)
Wang, W., Mottershead, J. E., Patterson, E., Siebert, T., & Ihle, A. (2013). Model Updating Using Shape Descriptors from Full-Field Images. In Unknown Conference (pp. 425-436). Springer New York. doi:10.1007/978-1-4614-6546-1_46DOI: 10.1007/978-1-4614-6546-1_46
Crack path support for deformation mechanisms in fatigue of polycarbonate (Journal article)
James, M. N., Lu, Y., Christopher, C. J., & Patterson, E. A. (2013). Crack path support for deformation mechanisms in fatigue of polycarbonate. ENGINEERING FRACTURE MECHANICS, 108, 89-97. doi:10.1016/j.engfracmech.2013.02.003DOI: 10.1016/j.engfracmech.2013.02.003
An approach to the validation of computational solid mechanics models for strain analysis (Journal article)
Sebastian, C., Hack, E., & Patterson, E. (2013). An approach to the validation of computational solid mechanics models for strain analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 48(1), 36-47. doi:10.1177/0309324712453409DOI: 10.1177/0309324712453409
Application of thermoelastic stress analysis for the experimental evaluation of the effective stress intensity factor (Journal article)
Díaz, F. A., Patterson, E. A., & Yates, J. R. (n.d.). Application of thermoelastic stress analysis for the experimental evaluation of the effective stress intensity factor. Frattura ed Integrità Strutturale, 7(25), 109-116. doi:10.3221/igf-esis.25.16DOI: 10.3221/igf-esis.25.16
Characterisation of Crack Tip Stress Fields, Proceedings of the 1st Joint International Journal of Fatigue/Fatigue & Fracture of Engineering Materials & Structures conference, held in Forni di Sopra, UD, ITaly, 7-9 March, 2011 (Journal article)
James, M. N., Yates, J. R., Susmel, L., Iacoviello, F., Nowell, D., Lazzarin, P., . . . Carpinteri, A. (2013). Characterisation of Crack Tip Stress Fields, Proceedings of the 1st Joint International Journal of Fatigue/Fatigue & Fracture of Engineering Materials & Structures conference, held in Forni di Sopra, UD, ITaly, 7-9 March, 2011. INTERNATIONAL JOURNAL OF FATIGUE, 46, 1. doi:10.1016/j.ijfatigue.2012.08.001DOI: 10.1016/j.ijfatigue.2012.08.001
Conference Proceedings of the Society for Experimental Mechanics Series: Preface (Conference Paper)
Patterson, E., Backman, D., & Cloud, G. (2013). Conference Proceedings of the Society for Experimental Mechanics Series: Preface. In Conference Proceedings of the Society for Experimental Mechanics Series Vol. 7.
Delamination-driven buckling in delaminated composite laminates under pure bending (Conference Paper)
Gong, W., Chen, J., & Patterson, E. A. (2013). Delamination-driven buckling in delaminated composite laminates under pure bending. In Advances in Experimental Mechanics. Cardiff: BSSM.
Experimental validation of finite element analysis of chemical pipe-work (Conference Paper)
Lowe, D., Hope, R., & Patterson, E. A. (2013). Experimental validation of finite element analysis of chemical pipe-work. In Advances in Experimental Mechanics. Cardiff: BSSM.
Extension of the CJP model to mixed mode I and mode II (Journal article)
Christopher, C. J., Laboviciute, G., James, M. N., & Patterson, E. A. (n.d.). Extension of the CJP model to mixed mode I and mode II. Frattura ed Integrità Strutturale, 7(25), 161-166. doi:10.3221/igf-esis.25.23DOI: 10.3221/igf-esis.25.23
Guest Editorial: Special Issue on Characterisation of Crack Tip Stress Fields (Journal article)
James, M. N., Yates, J. R., Susmel, L., Iacoviello, F., Nowell, D., Lazzarin, P., . . . Carpinteri, A. (2013). Guest Editorial: Special Issue on Characterisation of Crack Tip Stress Fields. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 36(1), 1-2. doi:10.1111/ffe.12004DOI: 10.1111/ffe.12004
Local crack plasticity and its influences on the global elastic stress field (Journal article)
James, M. N., Christopher, C. J., Lu, Y., & Patterson, E. A. (2013). Local crack plasticity and its influences on the global elastic stress field. INTERNATIONAL JOURNAL OF FATIGUE, 46, 4-15. doi:10.1016/j.ijfatigue.2012.04.015DOI: 10.1016/j.ijfatigue.2012.04.015
Local crack plasticity and its influences on the global elastic stress field (Journal article)
James, M. N., Christopher, C. J., Lu, Y., & Patterson, E. A. (2013). Local crack plasticity and its influences on the global elastic stress field. IJ Fatigue, 46, 4-15. doi:10.1016/j.ijfatigue.2012.04.-15DOI: 10.1016/j.ijfatigue.2012.04.-15
On the integration of validation, quality assurance and non-destructive evaluation (Journal article)
Patterson, E. A., Feligiotti, M., & Hack, E. (2013). On the integration of validation, quality assurance and non-destructive evaluation. Journal of Strain Analysis for Engineering Design, 48(1), 48-59. doi:10.1177/03093247112444681DOI: 10.1177/03093247112444681
On the integration of validation, quality assurance and non-destructive evaluation (Conference Paper)
Patterson, E. A., Feligiotti, M., & Hack, E. (2013). On the integration of validation, quality assurance and non-destructive evaluation. In JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN Vol. 48 (pp. 48-58). doi:10.1177/0309324712444681DOI: 10.1177/0309324712444681
Photoelastic Testing and FE Analysis of T-Stub Model (Conference Paper)
Álvarez, D. C., Haq, M., Álvarez, J. D. D. C., & Patterson, E. A. (2013). Photoelastic Testing and FE Analysis of T-Stub Model. In Unknown Conference (pp. 359-367). Springer New York. doi:10.1007/978-1-4614-4235-6_50DOI: 10.1007/978-1-4614-4235-6_50
Special issue on validation of computational solid mechanics models (Journal article)
Fu, S., & Patterson, E. (2013). Special issue on validation of computational solid mechanics models. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 48(1), 3-4. doi:10.1177/0309324712473553DOI: 10.1177/0309324712473553
2012
Structural damage assessment in fiber reinforced composites using image decomposition (Conference Paper)
Patki, A. S., & Patterson, E. A. (2012). Structural damage assessment in fiber reinforced composites using image decomposition. In Conference Proceedings of the Society for Experimental Mechanics Series Vol. 4 (pp. 43-51).
Decomposing Strain Maps Using Fourier-Zernike Shape Descriptors (Journal article)
Patki, A. S., & Patterson, E. A. (2012). Decomposing Strain Maps Using Fourier-Zernike Shape Descriptors. EXPERIMENTAL MECHANICS, 52(8), 1137-1149. doi:10.1007/s11340-011-9570-4DOI: 10.1007/s11340-011-9570-4
Effect of Cold Working on Crack Growth from Holes in Fiber Metal Laminates (Journal article)
Backman, D., & Patterson, E. A. (2012). Effect of Cold Working on Crack Growth from Holes in Fiber Metal Laminates. EXPERIMENTAL MECHANICS, 52(8), 1033-1045. doi:10.1007/s11340-011-9553-5DOI: 10.1007/s11340-011-9553-5
Assessment of a dynamic reference material for calibration of full-field measurement systems (Conference Paper)
Hack, E., Feligiotti, M., Davighi, A., Whelan, M., Wang, W. V., & Patterson, E. A. (2012). Assessment of a dynamic reference material for calibration of full-field measurement systems. In SPECKLE 2012: V INTERNATIONAL CONFERENCE ON SPECKLE METROLOGY Vol. 8413. doi:10.1117/12.977950DOI: 10.1117/12.977950
Calibration of a 3-D Digital Image Correlation system for large deformation contact problems (Conference Paper)
Tan, X. H., Kang, Y. L., & Patterson, E. A. (2012). Calibration of a 3-D Digital Image Correlation system for large deformation contact problems. In MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS 2012 (MPSVA 2012) Vol. 382. doi:10.1088/1742-6596/382/1/012035DOI: 10.1088/1742-6596/382/1/012035
Quantitative measurement of plastic strain field at a fatigue crack tip (Journal article)
Yang, Y., Crimp, M., Tomlinson, R. A., & Patterson, E. A. (2012). Quantitative measurement of plastic strain field at a fatigue crack tip. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 468(2144), 2399-2415. doi:10.1098/rspa.2011.0682DOI: 10.1098/rspa.2011.0682
Damage assessment of fibre reinforced composites using shape descriptors (Journal article)
Patki, A. S., & Patterson, E. A. (2012). Damage assessment of fibre reinforced composites using shape descriptors. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 47(4), 244-253. doi:10.1177/0309324712440554DOI: 10.1177/0309324712440554
Fatigue crack growth and craze-induced crack tip shielding in polycarbonate (Journal article)
James, M. N., Christopher, C. J., Lu, Y., & Patterson, E. A. (2012). Fatigue crack growth and craze-induced crack tip shielding in polycarbonate. POLYMER, 53(7), 1558-1570. doi:10.1016/j.polymer.2012.01.032DOI: 10.1016/j.polymer.2012.01.032
Composite Materials and Joining Technologies for Composites (Conference Paper)
Patterson, E. A., Backman, D., & Cloud, G. (Eds.) (2012). Composite Materials and Joining Technologies for Composites. In Ann. Conf. on Experimental and Applied Mechanics (pp. 243). New York: Springer.
On characterizing strain fields in impact-damaged composites using shape descriptors (Journal article)
Patterson, E. A., & Patki, A. S. (2012). On characterizing strain fields in impact-damaged composites using shape descriptors. IUTAM SYMPOSIUM ON FULL-FIELD MEASUREMENTS AND IDENTIFICATION IN SOLID MECHANICS, 2011, 4, 126-132. doi:10.1016/j.piutam.2012.05.014DOI: 10.1016/j.piutam.2012.05.014
Photoelastic testing and FE analysis of T-stub model (Conference Paper)
Alvarez Carazo, D., Haq, M., Carazo Alvarez, J. D., & Patterson, E. A. (2012). Photoelastic testing and FE analysis of T-stub model. In Proc. 2012 SEM Annual Conf. & Exposition on Exptl. & Applied Mechanics (pp. 261). Costa Mesa: SEM.
Photoelasticity (Chapter)
Patterson, E. A. (2012). Photoelasticity. In P. K. Rastogi, & E. Hack (Eds.), Optical Methods for Solid Mechanics (pp. 367-392). Weinheim: Wiley VCH.
Quantitative Measurement of the Plastic Strain Field at a Fatigue Crack Tip using Backscattered Electron Images (Journal article)
Yang, Y., Crimp, M. A., Tomlinson, R. A., & Patterson, E. A. (2012). Quantitative Measurement of the Plastic Strain Field at a Fatigue Crack Tip using Backscattered Electron Images. Microscopy and Microanalysis, 18(S2), 692-693. doi:10.1017/s1431927612005314DOI: 10.1017/s1431927612005314
2011
Comparison of numerical and experimental strain measurements of a composite panel using image decomposition (Journal article)
Sebastian, C., Patterson, E., & Ostberg, D. (2011). Comparison of numerical and experimental strain measurements of a composite panel using image decomposition. ADVANCES IN EXPERIMENTAL MECHANICS VIII, 70, 63-+. doi:10.4028/www.scientific.net/AMM.70.63DOI: 10.4028/www.scientific.net/AMM.70.63
Image Analysis for Full-Field Displacement/Strain Data: Method and Applications (Journal article)
Wang, W. Z., Mottershead, J. E., Sebastian, C. M., Patterson, E. A., Siebert, T., Ihle, A., & Pipino, A. (n.d.). Image Analysis for Full-Field Displacement/Strain Data: Method and Applications. Applied Mechanics and Materials, 70, 39-44. doi:10.4028/www.scientific.net/amm.70.39DOI: 10.4028/www.scientific.net/amm.70.39
Preface (Book)
Burguete, R., Lucas, M., Patterson, E., & Quinn, S. (2011). Preface (Vol. 70).
The development of a reference material for calibration of full-field optical measurement systems for dynamic deformation measurements (Journal article)
Davighi, A., Burquete, R., Feligiotti, M., Hack, E., James, S., Patterson, E., . . . Whelan, M. (2011). The development of a reference material for calibration of full-field optical measurement systems for dynamic deformation measurements. ADVANCES IN EXPERIMENTAL MECHANICS VIII, 70, 33-+. doi:10.4028/www.scientific.net/AMM.70.33DOI: 10.4028/www.scientific.net/AMM.70.33
Thermoelastic Stress Analysis of T-Stub Model (Journal article)
Carazo Alvarez, D., Haq, M., Carazo Alvarez, J. D., & Patterson, E. A. (n.d.). Thermoelastic Stress Analysis of T-Stub Model. Applied Mechanics and Materials, 70, 464-469. doi:10.4028/www.scientific.net/amm.70.464DOI: 10.4028/www.scientific.net/amm.70.464
Understanding Crack Tip Plasticity – a Multi-Experimental Approach (Journal article)
Tomlinson, R. A., Du, Y., & Patterson, E. A. (n.d.). Understanding Crack Tip Plasticity – a Multi-Experimental Approach. Applied Mechanics and Materials, 70, 153-158. doi:10.4028/www.scientific.net/amm.70.153DOI: 10.4028/www.scientific.net/amm.70.153
Three-dimensional automated nanoparticle tracking using Mie scattering in an optical microscope (Journal article)
Gineste, J. -M., Macko, P., Patterson, E. A., & Whelan, M. P. (2011). Three-dimensional automated nanoparticle tracking using Mie scattering in an optical microscope. JOURNAL OF MICROSCOPY, 243(2), 172-178. doi:10.1111/j.1365-2818.2011.03491.xDOI: 10.1111/j.1365-2818.2011.03491.x
Image processing of full-field strain data and its use in model updating (Conference Paper)
Wang, W., Mottershead, J. E., Sebastian, C. M., & Patterson, E. A. (2011). Image processing of full-field strain data and its use in model updating. In 9TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES (DAMAS 2011) Vol. 305. doi:10.1088/1742-6596/305/1/012011DOI: 10.1088/1742-6596/305/1/012011
Deconstructing Engineering Education Programmes: The DEEP Project to reform the mechanical engineering curriculum (Journal article)
Busch-Vishniac, I., Kibler, T., Campbell, P. B., Patterson, E., Guillaume, D., Jarosz, J., . . . Ray, P. (2011). Deconstructing Engineering Education Programmes: The DEEP Project to reform the mechanical engineering curriculum. European Journal of Engineering Education, 36(3), 269-283. doi:10.1080/03043797.2011.579590DOI: 10.1080/03043797.2011.579590
Shape features and finite element model updating from full-field strain data (Journal article)
Wang, W., Mottershead, J. E., Sebastian, C. M., & Patterson, E. A. (2011). Shape features and finite element model updating from full-field strain data. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 48(11-12), 1644-1657. doi:10.1016/j.ijsolstr.2011.02.010DOI: 10.1016/j.ijsolstr.2011.02.010
The effect of context on student engagement in engineering (Journal article)
Patterson, E. A., Campbell, P. B., Busch-Vishniac, I., & Guillaume, D. W. (2011). The effect of context on student engagement in engineering. European Journal of Engineering Education, 36(3), 211-224. doi:10.1080/03043797.2011.575218DOI: 10.1080/03043797.2011.575218
A simultaneous in- and out-of-plane displacement measurement method (Journal article)
Siegmann, P., Alvarez-Fernandez, V., Diaz-Garrido, F., & Patterson, E. A. (2011). A simultaneous in- and out-of-plane displacement measurement method. OPTICS LETTERS, 36(1), 10-12. doi:10.1364/OL.36.000010DOI: 10.1364/OL.36.000010
Advances in Experimental Mechanics VIII (Conference Paper)
Burguete, R. L., Lucas, M., Patterson, E. A., & Quinn, S. (Eds.) (2011). Advances in Experimental Mechanics VIII. In Advances in Experimental Mechanics: Integrating Experimentation and Simulation for Validation (pp. 300). Durnten-Zuerich: Trans Tech Publications.
Crack Tip Shielding from a Plastic 'Inclusion' (Journal article)
James, M. N., Christopher, C. J., Lu, Y., Tee, K. F., & Patterson, E. A. (2011). Crack Tip Shielding from a Plastic 'Inclusion'. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 465, 1-8. doi:10.4028/www.scientific.net/KEM.465.1DOI: 10.4028/www.scientific.net/KEM.465.1
Determination of the isoclinic map for complex photoelastic fringe patterns (Conference Paper)
Siegmann, P., Colombo, C., Díaz-Garrido, F., & Patterson, E. (2011). Determination of the isoclinic map for complex photoelastic fringe patterns. In Unknown Conference (pp. 79-85). Springer New York. doi:10.1007/978-1-4419-9792-0_14DOI: 10.1007/978-1-4419-9792-0_14
Development of a New Fiber Metal Laminate Variant Optimized for Cold Expansion and Riveting of Holes (Conference Paper)
Backman, D., Sears, T., & Patterson, E. A. (2011). Development of a New Fiber Metal Laminate Variant Optimized for Cold Expansion and Riveting of Holes. In Unknown Conference (pp. 785-795). Springer Netherlands. doi:10.1007/978-94-007-1664-3_61DOI: 10.1007/978-94-007-1664-3_61
Evaluation Using Digital Image Correlation of Stress Intensity Factors in an Aerospace Panel (Journal article)
Du, Y., Diaz, F. A., Burguete, R. L., & Patterson, E. A. (2011). Evaluation Using Digital Image Correlation of Stress Intensity Factors in an Aerospace Panel. EXPERIMENTAL MECHANICS, 51(1), 45-57. doi:10.1007/s11340-010-9335-5DOI: 10.1007/s11340-010-9335-5
Examination of Crack Tip Plasticity Using Thermoelastic Stress Analysis (Conference Paper)
Tomlinson, R. A., & Patterson, E. A. (2011). Examination of Crack Tip Plasticity Using Thermoelastic Stress Analysis. In Unknown Conference (pp. 123-129). Springer New York. doi:10.1007/978-1-4614-0207-7_16DOI: 10.1007/978-1-4614-0207-7_16
Examination of crack tip plasticity using thermoelastic stress analysis (Conference Paper)
Tomlinson, R. A., & Patterson, E. A. (2011). Examination of crack tip plasticity using thermoelastic stress analysis. In SEM Annual Conf. & Exposition on Exptl. & Applied Mechanics (pp. 259). Bethel: SEM.
Experimental testing (2D DIC) and FE Modelling of T-stub model (Conference Paper)
Carazo-Alvarez, D., Haq, M., Carazo-Alvarez, J. D., & Patterson, E. A. (2011). Experimental testing (2D DIC) and FE Modelling of T-stub model. In SEM Annual Conf. & Exposition on Exptl. & Applied Mechanics (pp. 312). Bethel: SEM.
Experimental testing (2D DIC) and FE modeling of T-Stub Model (Conference Paper)
Alvarez, D. C., Haq, M., de Dios Carazo Alvarez, J., & Patterson, E. A. (2011). Experimental testing (2D DIC) and FE modeling of T-Stub Model. In Unknown Conference (pp. 415-422). Springer New York. doi:10.1007/978-1-4614-0228-2_50DOI: 10.1007/978-1-4614-0228-2_50
Fatigue Cracks in Fibre Metal Laminates in the Presences of Rivets and Cold Expanded Holes (Conference Paper)
Backman, D., & Patterson, E. A. (2011). Fatigue Cracks in Fibre Metal Laminates in the Presences of Rivets and Cold Expanded Holes. In Unknown Conference (pp. 541-548). Springer New York. doi:10.1007/978-1-4419-9792-0_79DOI: 10.1007/978-1-4419-9792-0_79
Image Analysis for Full-Field Displacement/Strain Data: Method and Applications (Conference Paper)
Wang, W., Mottershead, J. E., Sebastian, C. M., Patterson, E. A., Siebert, T., Ihle, A., & Pipino, A. (2011). Image Analysis for Full-Field Displacement/Strain Data: Method and Applications. In ADVANCES IN EXPERIMENTAL MECHANICS VIII Vol. 70 (pp. 39-+). doi:10.4028/www.scientific.net/AMM.70.39DOI: 10.4028/www.scientific.net/AMM.70.39
Monitoring Crack Tip Plastic Zone Size During Fatigue Loading (Conference Paper)
Du, Y., Patki, A., & Patterson, E. (2011). Monitoring Crack Tip Plastic Zone Size During Fatigue Loading. In Unknown Conference (pp. 569-573). Springer New York. doi:10.1007/978-1-4419-9792-0_83DOI: 10.1007/978-1-4419-9792-0_83
Progress in developing a standard for dynamic strain analysis (Conference Paper)
Hack, E., Lampeas, G., Mottershead, J. E., Patterson, E. A., Siebert, T., & Whelan, M. P. (2011). Progress in developing a standard for dynamic strain analysis. In SEM Annual Conf. & Exposition on Exptl. & Applied Mechanics (pp. 248). Bethel: SEM.
Progress in developing a standard for dynamic strain analysis (Conference Paper)
Hack, E., Lampeas, G., Mottershead, J., Patterson, E., Siebert, T., & Whelan, M. (2011). Progress in developing a standard for dynamic strain analysis. In Unknown Conference (pp. 425-429). Springer New York. doi:10.1007/978-1-4614-0222-0_52DOI: 10.1007/978-1-4614-0222-0_52
Real Life Examples in Fluid Mechanics (Book)
Patterson, E. A. (2011). Real Life Examples in Fluid Mechanics. East Lansing: Michigan State University.
Standards for Validating Stress Analyses by Integrating Simulation and Experimentation (Conference Paper)
Hack, E., Lampeas, G., Mottershead, J., Patterson, E., Siebert, T., & Whelan, M. (2011). Standards for Validating Stress Analyses by Integrating Simulation and Experimentation. In Unknown Conference (pp. 23-29). Springer New York. doi:10.1007/978-1-4419-9792-0_4DOI: 10.1007/978-1-4419-9792-0_4
Thermoelastic Stress Analysis of T-Stub Model (Conference Paper)
Carazo Alvarez, D., Haq, M., Carazo Alvarez, J. D., & Patterson, E. A. (2011). Thermoelastic Stress Analysis of T-Stub Model. In ADVANCES IN EXPERIMENTAL MECHANICS VIII Vol. 70 (pp. 464-+). doi:10.4028/www.scientific.net/.464DOI: 10.4028/www.scientific.net/.464
Tracking nanoparticles optically to study their interaction with cells (Conference Paper)
Gineste, J. -M., Macko, P., Patterson, E., & Whelan, M. (2011). Tracking nanoparticles optically to study their interaction with cells. In Unknown Conference (pp. 307-310). Springer New York. doi:10.1007/978-1-4419-9792-0_50DOI: 10.1007/978-1-4419-9792-0_50
Understanding crack tip plasticity - a multi-experimental approach (Conference Paper)
Tomlinson, R. A., Du, Y., & Patterson, E. A. (2011). Understanding crack tip plasticity - a multi-experimental approach. In ADVANCES IN EXPERIMENTAL MECHANICS VIII Vol. 70 (pp. 153-+). doi:10.4028/www.scientific.net/AMM.70.153DOI: 10.4028/www.scientific.net/AMM.70.153
2010
A Novel Experimental Approach for Calculating Stress Intensity Factors from Isochromatic Data (Conference Paper)
Diaz, F. A., Patterson, E. A., & Siegmann, P. (2010). A Novel Experimental Approach for Calculating Stress Intensity Factors from Isochromatic Data. In EXPERIMENTAL MECHANICS Vol. 50 (pp. 273-281). doi:10.1007/s11340-009-9282-1DOI: 10.1007/s11340-009-9282-1
Analysis of the effects of cold expansion of holes using thermoelasticity and image correlation (Journal article)
Backman, D., Cowal, C., & Patterson, E. A. (2010). Analysis of the effects of cold expansion of holes using thermoelasticity and image correlation. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 33(12), 859-870. doi:10.1111/j.1460-2695.2010.01472.xDOI: 10.1111/j.1460-2695.2010.01472.x
Construction of shape features for the representation of full-field displacement/strain data (Conference Paper)
Wang, W., Mottershead, J. E., Patki, A., & Patterson, E. A. (2010). Construction of shape features for the representation of full-field displacement/strain data. In ADVANCES IN EXPERIMENTAL MECHANICS VII Vol. 24-25 (pp. 365-+). doi:10.4028/www.scientific.net/AMM.24-25.365DOI: 10.4028/www.scientific.net/AMM.24-25.365
FFEMS editorial for special issue on experimental mechanics (Journal article)
Patterson, E. A. (2010). FFEMS editorial for special issue on experimental mechanics. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 33(12), 765. doi:10.1111/j.1460-2695.2010.01532.xDOI: 10.1111/j.1460-2695.2010.01532.x
Full-field Modelling of Crack Tip Shielding via the 'Plastic Inclusion' Concept (Conference Paper)
James, M. N., Lu, Y., Christopher, C. J., & Patterson, E. A. (2010). Full-field Modelling of Crack Tip Shielding via the 'Plastic Inclusion' Concept. In MATERIALS AND PRODUCT TECHNOLOGIES Vol. 118-120 (pp. 1-+). doi:10.4028/www.scientific.net/AMR.118-120.1DOI: 10.4028/www.scientific.net/AMR.118-120.1
Health monitoring of composite Pi-joints using fiber optic sensors (Conference Paper)
Haq, M., Drzal, L., & Patterson, E. (2010). Health monitoring of composite Pi-joints using fiber optic sensors. In 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010 Vol. 1 (pp. 198-209).
On crack tip shielding due to plasticity-induced closure during an overload (Journal article)
Colombo, C., Du, Y., James, M. N., Patterson, E. A., & Vergani, L. (2010). On crack tip shielding due to plasticity-induced closure during an overload. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 33(12), 766-777. doi:10.1111/j.1460-2695.2010.01439.xDOI: 10.1111/j.1460-2695.2010.01439.x
Pull-out behavior of adhesively bonded composite pi-joints: Damage modeling & comparison with experiments (Conference Paper)
Haq, M., Patterson, E., & Drzal, L. (2010). Pull-out behavior of adhesively bonded composite pi-joints: Damage modeling & comparison with experiments. In 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010 Vol. 1 (pp. 420-429).
Thermoelastic stress analysis of fatigue cracks subject to overloads (Journal article)
Patki, A. S., & Patterson, E. A. (2010). Thermoelastic stress analysis of fatigue cracks subject to overloads. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 33(12), 809-821. doi:10.1111/j.1460-2695.2010.01471.xDOI: 10.1111/j.1460-2695.2010.01471.x
Determination of the isoclinic map for complex photoelastic fringe patterns (Conference Paper)
Siegmann, P., Colombo, C., Díaz-Garrido, F., & Patterson, E. (2010). Determination of the isoclinic map for complex photoelastic fringe patterns. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 1 (pp. 167-173).
Fatigue cracks in fibre metal laminates in the presences of rivets and cold expanded holes (Conference Paper)
Backman, D., & Patterson, E. A. (2010). Fatigue cracks in fibre metal laminates in the presences of rivets and cold expanded holes. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 3 (pp. 1917-1924).
Monitoring crack tip plastic zone size during fatigue loading (Conference Paper)
Du, Y., Patki, A., & Patterson, E. (2010). Monitoring crack tip plastic zone size during fatigue loading. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 3 (pp. 2036-2040).
Standards for validating stress analyses by integrating simulation and experimentation (Conference Paper)
Hack, E., Lampeas, G., Mottershead, J., Patterson, E., Siebert, T., & Whelan, M. (2010). Standards for validating stress analyses by integrating simulation and experimentation. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 1 (pp. 100-106).
Structural damage assessment in fiber reinforced composites using image decomposition (Conference Paper)
Patki, A. S., & Patterson, E. A. (2010). Structural damage assessment in fiber reinforced composites using image decomposition. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 1 (pp. 250-258).
Tracking nanoparticles optically to study their interaction with cells (Conference Paper)
Gineste, J. M., Macko, P., Patterson, E., & Whelan, M. (2010). Tracking nanoparticles optically to study their interaction with cells. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 2 (pp. 1385-1388).
Experimental Validation of Simulations Using Full-field Measurement Techniques (Conference Paper)
Hack, E., & Patterson, E. A. (2010). Experimental Validation of Simulations Using Full-field Measurement Techniques. In 9TH INTERNATIONAL CONFERENCE ON VIBRATION MEASUREMENTS BY LASER AND NONCONTACT TECHNIQUES AND SHORT COURSE Vol. 1253 (pp. 405-+). doi:10.1063/1.3455483DOI: 10.1063/1.3455483
A reference material for dynamic displacement calibration (Conference Paper)
Davighi, A., Hack, E., Patterson, E., & Whelan, M. (2010). A reference material for dynamic displacement calibration. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646006DOI: 10.1051/epjconf/20100646006
Calibration and validation of full-field techniques (Conference Paper)
Hack, E., Patterson, E., Siebert, T., & Thalmann, R. (2010). Calibration and validation of full-field techniques. In EPJ Web of Conferences Vol. 6 (pp. 46003). EDP Sciences. doi:10.1051/epjconf/20100646003DOI: 10.1051/epjconf/20100646003
Image decomposition as a tool for validating stress analysis models (Conference Paper)
Patki, A., Wang, W., Mottershead, J., & Patterson, E. (2010). Image decomposition as a tool for validating stress analysis models. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646005DOI: 10.1051/epjconf/20100646005
SPOTS Calibration Example (Conference Paper)
Sebastian, C., & Patterson, E. A. (2010). SPOTS Calibration Example. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646002DOI: 10.1051/epjconf/20100646002
SPOTS project and development of a standard and reference material (Conference Paper)
Burguete, R., & Patterson, E. (2010). SPOTS project and development of a standard and reference material. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646001DOI: 10.1051/epjconf/20100646001
Validation of full-field techniques: discussion of experiences (Conference Paper)
Hack, E., Burguete, R., Siebert, T., Davighi, A., Mottershead, J., Lampeas, G., . . . Pipino, A. (2010). Validation of full-field techniques: discussion of experiences. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646004DOI: 10.1051/epjconf/20100646004
2009
A new experimental method for calculating K<inf>I</inf> and K<inf>II</inf> using photoelasticity (Conference Paper)
Diaz, F. A., Patterson, E. A., & Siegmann, P. (2009). A new experimental method for calculating K<inf>I</inf> and K<inf>II</inf> using photoelasticity. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009 Vol. 1 (pp. 375-381).
An innovation process for composite structures from nano- to macro-scale: A vision for a new center (Conference Paper)
Patterson, E. (2009). An innovation process for composite structures from nano- to macro-scale: A vision for a new center. In 9th Annual Automotive Composites Conference and Exhibition, ACCE 2009 (pp. 36-64).
Fatigue life enhancement of fiber metal laminate materials as a result of hole cold expansion (Conference Paper)
Backman, D., & Patterson, E. A. (2009). Fatigue life enhancement of fiber metal laminate materials as a result of hole cold expansion. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009 Vol. 1 (pp. 588-592).
Stress intensity factor evaluation using DIC on an aerospace component (Conference Paper)
Du, Y., Diaz Garrido, F. A., Burguete, R. L., & Patterson, E. A. (2009). Stress intensity factor evaluation using DIC on an aerospace component. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009 Vol. 2 (pp. 1426-1432).
Study of fatigue crack shielding forces using thermoelastic stress analysis (TSA) (Conference Paper)
Patki, A. S., & Patterson, E. A. (2009). Study of fatigue crack shielding forces using thermoelastic stress analysis (TSA). In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009 Vol. 1 (pp. 46-47).
Assessment of effective stress intensity factors using thermoelastic stress analysis (Journal article)
Diaz, F. A., Patterson, E. A., & Yates, J. R. (2009). Assessment of effective stress intensity factors using thermoelastic stress analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 44(7), 621-631. doi:10.1243/03093247JSA515DOI: 10.1243/03093247JSA515
SPECIAL SECTION ON STRAIN AND DEFORMATION IN NANOSCALE OBJECTS (Journal article)
Patterson, E. (2009). SPECIAL SECTION ON STRAIN AND DEFORMATION IN NANOSCALE OBJECTS. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 44(7), I-II. doi:10.1177/030932470904400701DOI: 10.1177/030932470904400701
Robust approach to regularize an isochromatic fringe map (Journal article)
Siegmann, P., Diaz-Garrido, F., & Patterson, E. A. (2009). Robust approach to regularize an isochromatic fringe map. APPLIED OPTICS, 48(22), E24-E34. doi:10.1364/AO.48.000E24DOI: 10.1364/AO.48.000E24
Some experimental observations on crack closure and crack-tip plasticity (Journal article)
Lopez-Crespo, P., Shterenlikht, A., Yates, J. R., Patterson, E. A., & Withers, P. J. (2009). Some experimental observations on crack closure and crack-tip plasticity. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 32(5), 418-429. doi:10.1111/j.1460-2695.2009.01345.xDOI: 10.1111/j.1460-2695.2009.01345.x
Editorial (Journal article)
Yates, J. R., Patterson, E. A., Brennan, F., & Sherry, A. H. (2009). Editorial. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 32(1), 1. doi:10.1111/j.1460-2695.2008.01300.xDOI: 10.1111/j.1460-2695.2008.01300.x
Embedding Enterprise in Engineering (Journal article)
Handscombe, R. D., Rodriguez-Falcon, E., & Patterson, E. A. (2009). Embedding Enterprise in Engineering. International Journal of Mechanical Engineering Education, 37(4), 263-274. doi:10.7227/ijmee.37.4.1DOI: 10.7227/ijmee.37.4.1
Study of a Crack at a Fastener Hole by Digital Image Correlation (Journal article)
Lopez-Crespo, P., Burguete, R. L., Patterson, E. A., Shterenlikht, A., Withers, P. J., & Yates, J. R. (2009). Study of a Crack at a Fastener Hole by Digital Image Correlation. EXPERIMENTAL MECHANICS, 49(4), 551-559. doi:10.1007/s11340-008-9161-1DOI: 10.1007/s11340-008-9161-1
2008
Measuring residual strains in aluminum and fiber metal laminate materials during cold expansion and riveting (Conference Paper)
Backman, D., & Patterson, E. A. (2008). Measuring residual strains in aluminum and fiber metal laminate materials during cold expansion and riveting. In Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008 Vol. 1 (pp. 217-223).
A new approach to measuring surface residual stress using thermoelasticity (Conference Paper)
Du, Y., Backman, D., & Patterson, E. (2008). A new approach to measuring surface residual stress using thermoelasticity. In Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008 Vol. 2 (pp. 673-680).
Caustics at the nano-scale (Conference Paper)
Patterson, E. A., & Whelan, M. P. (2008). Caustics at the nano-scale. In Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008 Vol. 2 (pp. 795-799).
Evaluation of crack tip shielding using a photoelastic model (Conference Paper)
Christopher, C., James, M. N., Tee, K. F., & Patterson, E. A. (2008). Evaluation of crack tip shielding using a photoelastic model. In Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008 Vol. 1 (pp. 333-338).
Low cost snap-shot shape and deformation measurement (Conference Paper)
Patterson, E. A. (2008). Low cost snap-shot shape and deformation measurement. In Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008 Vol. 1 (pp. 124-128).
Optical Signatures of Small Nanoparticles in a Conventional Microscope (Journal article)
Patterson, E. A., & Whelan, M. P. (2008). Optical Signatures of Small Nanoparticles in a Conventional Microscope. SMALL, 4(10), 1703-1706. doi:10.1002/smll.200800703DOI: 10.1002/smll.200800703
Embedding enterprise in science and engineering departments (Journal article)
Handscombe, R. D., Rodriguez‐Falcon, E., & Patterson, E. A. (2008). Embedding enterprise in science and engineering departments. Education + Training, 50(7), 615-625. doi:10.1108/00400910810909063DOI: 10.1108/00400910810909063
A quantitative evaluation of fatigue crack shielding forces using photoelasticity (Journal article)
Christopher, C. J., James, M. N., Patterson, E. A., & Tee, K. F. (2008). A quantitative evaluation of fatigue crack shielding forces using photoelasticity. ENGINEERING FRACTURE MECHANICS, 75(14), 4190-4199. doi:10.1016/j.engfracmech.2008.03.013DOI: 10.1016/j.engfracmech.2008.03.013
The stress intensity of mixed mode cracks determined by digital image correlation (Journal article)
Lopez-Crespo, P., Shterenlikht, A., Patterson, E. A., Yates, J. R., & Withers, P. J. (2008). The stress intensity of mixed mode cracks determined by digital image correlation. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 43(8), 769-780. doi:10.1243/03093247JSA419DOI: 10.1243/03093247JSA419
The use of digital image correlation in a parametric study on the effect of edge distance and thickness on residual strains after hole cold expansion (Journal article)
Backman, D., Liao, M., Crichlow, L., Yanishevsky, M., & Patterson, E. A. (2008). The use of digital image correlation in a parametric study on the effect of edge distance and thickness on residual strains after hole cold expansion. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 43(8), 781-789. doi:10.1243/03093247JSA448DOI: 10.1243/03093247JSA448
Determining individual stresses thermoelastically (Journal article)
Patterson, E. A., & Rowlands, R. E. (2008). Determining individual stresses thermoelastically. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 43(6), 519-527. doi:10.1243/03093247JSA358DOI: 10.1243/03093247JSA358
Calibration of a speckle interferometry full-field strain measurement system (Journal article)
Whelan, M. P., Albrecht, D., Hack, E., & Patterson, E. A. (2008). Calibration of a speckle interferometry full-field strain measurement system. STRAIN, 44(2), 180-190. doi:10.1111/j.1475-1305.2007.00364.xDOI: 10.1111/j.1475-1305.2007.00364.x
Tracking nanoparticles in an optical microscope using caustics (Journal article)
Patterson, E. A., & Whelan, M. P. (2008). Tracking nanoparticles in an optical microscope using caustics. NANOTECHNOLOGY, 19(10). doi:10.1088/0957-4484/19/10/105502DOI: 10.1088/0957-4484/19/10/105502
Fatigue crack monitoring using image correlation (Conference Paper)
Lopez-Crespo, P., Shterenlikht, A., Patterson, E. A., Yates, J. R., & Withers, P. J. (2008). Fatigue crack monitoring using image correlation. In ADVANCES IN FRACTURE AND DAMAGE MECHANICS VII Vol. 385-387 (pp. 341-+). doi:10.4028/www.scientific.net/KEM.385-387.341DOI: 10.4028/www.scientific.net/KEM.385-387.341
Integrating applications in the teaching of fundamental concepts (Conference Paper)
Campbell, P., Patterson, E., Busch-Vishniac, I., & Kibler, T. (2008). Integrating applications in the teaching of fundamental concepts. In ASEE Annual Conference and Exposition, Conference Proceedings.
Numerical and experimental analysis of crack closure (Conference Paper)
Lopez-Crespo, P., Camas-Pena, D., Gonzalez-Herrera, A., Yates, J. R., Patterson, E. A., & Zapatero, J. (2008). Numerical and experimental analysis of crack closure. In ADVANCES IN FRACTURE AND DAMAGE MECHANICS VII Vol. 385-387 (pp. 369-+). doi:10.4028/www.scientific.net/KEM.385-387.369DOI: 10.4028/www.scientific.net/KEM.385-387.369
2007
40 Years of strain analysis for engineering design (Journal article)
Patterson, E. (2007). 40 Years of strain analysis for engineering design. Journal of Strain Analysis for Engineering Design, 42(8).
Towards a new model of crack tip stress fields (Journal article)
Christopher, C. J., James, M. N., Patterson, E. A., & Tee, K. F. (2007). Towards a new model of crack tip stress fields. INTERNATIONAL JOURNAL OF FRACTURE, 148(4), 361-371. doi:10.1007/s10704-008-9209-3DOI: 10.1007/s10704-008-9209-3
Quantifying uncertainties in optical measurements of strain (Conference Paper)
Albrecht, D., Whelan, M., Hack, E., & Patterson, E. (2007). Quantifying uncertainties in optical measurements of strain. In Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007 Vol. 1 (pp. 554-560).
Study of a crack at a fastener hole by image correlation (Conference Paper)
López-Crespo, P., Patterson, E. A., Shterenlikht, A., Withers, P. J., & Yates, J. R. (2007). Study of a crack at a fastener hole by image correlation. In Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007 Vol. 3 (pp. 1812-1816).
The potential for quantifying residual stress using thermoelastic stress analysis (Conference Paper)
Patterson, E. A. (2007). The potential for quantifying residual stress using thermoelastic stress analysis. In Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007 Vol. 1 (pp. 664-669).
40 years of strain analysis for engineering design (Journal article)
Patterson, E. (2007). 40 years of strain analysis for engineering design. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 42(8), I. doi:10.1177/030932470704200801DOI: 10.1177/030932470704200801
A Challenge for High-Performance Full-Field Strain Measurement Systems (Conference Paper)
Patterson, E., Brailly, P., Burguete, R., Hack, E., Siebert, T., & Whelan, M. (2007). A Challenge for High-Performance Full-Field Strain Measurement Systems. In Strain Vol. 43 (pp. 167-180). Wiley. doi:10.1111/j.1475-1305.2007.00344.xDOI: 10.1111/j.1475-1305.2007.00344.x
Calibration and evaluation of optical systems for full-field strain measurement (Journal article)
Patterson, E. A., Hack, E., Brailly, P., Burguete, R. L., Saleem, Q., Siebert, T., . . . Whelan, M. P. (2007). Calibration and evaluation of optical systems for full-field strain measurement. OPTICS AND LASERS IN ENGINEERING, 45(5), 550-564. doi:10.1016/j.optlaseng.2006.08.012DOI: 10.1016/j.optlaseng.2006.08.012
Crack detection in rail using infrared methods (Journal article)
Greene, R. J., Yates, J. R., & Patterson, E. A. (2007). Crack detection in rail using infrared methods. OPTICAL ENGINEERING, 46(5). doi:10.1117/1.2738490DOI: 10.1117/1.2738490
Some applications of combined thermoelastic-photoelastic stress analysis (Journal article)
Greene, R. J., Clarke, A. B., Turner, S., & Patterson, E. A. (2007). Some applications of combined thermoelastic-photoelastic stress analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 42(3), 173-182. doi:10.1243/03093247JSA134DOI: 10.1243/03093247JSA134
New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity (Conference Paper)
Tee, K. F., Christopher, C. J., James, M. N., & Patterson, E. A. (2007). New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2 Vol. 345-346 (pp. 199-+). doi:10.4028/www.scientific.net/KEM.345-346.199DOI: 10.4028/www.scientific.net/KEM.345-346.199
Observations on photo-emission and the process zone of a fatigue crack (Conference Paper)
Patterson, E. A., Diaz, F. A., & Yates, J. R. (2007). Observations on photo-emission and the process zone of a fatigue crack. In ASTM Special Technical Publication Vol. 1480 STP (pp. 225-233).
2006
Developing standards for Optical Methods of Strain Measurement (Conference Paper)
Burguete, R., Hack, E., Kujawinska, M., Patterson, E., Saleem, Q., Siebert, T., & Whelan, M. (2006). Developing standards for Optical Methods of Strain Measurement. In Conference Proceedings of the Society for Experimental Mechanics Series.
High Frequency Quantitative Photoelasticity Applied to Jet Engine Components (Journal article)
Patterson, E., Brailly, P., & Taroni, M. (2006). High Frequency Quantitative Photoelasticity Applied to Jet Engine Components. Experimental Mechanics, 46(6), 661-668. doi:10.1007/s11340-006-9574-7DOI: 10.1007/s11340-006-9574-7
Rail crack detection: An infrared approach to in-service track monitoring (Conference Paper)
Greene, R. J., Yates, J. R., & Patterson, E. A. (2006). Rail crack detection: An infrared approach to in-service track monitoring. In Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006 Vol. 2 (pp. 741-748).
Standards project for optical techniques of strain measurement: Final report (Conference Paper)
Burguete, R., Hack, E., Kujawinska, M., Patterson, E., Saleem, Q., Siebert, T., & Whelan, M. (2006). Standards project for optical techniques of strain measurement: Final report. In Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006 Vol. 3 (pp. 1486-1492).
Towards real time crack monitoring using image correlation (Conference Paper)
López-Crespo, P., Shterenlikht, A., Patterson, E. A., Yates, J. R., Withers, P. J., & Burguete, R. (2006). Towards real time crack monitoring using image correlation. In Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006 Vol. 4 (pp. 2006-2013).
Calibration and assessment of full-field optical strain measurement procedures and instrumentation (Conference Paper)
Kujawinska, M., Patterson, E. A., Burguete, R., Hack, E., Mendels, D., Siebert, T., & Whelan, M. (2006). Calibration and assessment of full-field optical strain measurement procedures and instrumentation. In SPECKLE06: SPECKLES, FROM GRAINS TO FLOWERS Vol. 6341. doi:10.1117/12.695297DOI: 10.1117/12.695297
An integrated approach to the separation of principal surface stresses using combined thermo-photo-elasticity (Journal article)
Greene, R. J., & Patterson, E. A. (2006). An integrated approach to the separation of principal surface stresses using combined thermo-photo-elasticity. EXPERIMENTAL MECHANICS, 46(1), 19-29. doi:10.1007/s11340-006-5858-1DOI: 10.1007/s11340-006-5858-1
Phase-stepping photoelasticity for the measurement of interfacial shear stress in single fibre composites (Journal article)
Zhao, F. M., Hayes, S. A., Patterson, E. A., & Jones, F. R. (2006). Phase-stepping photoelasticity for the measurement of interfacial shear stress in single fibre composites. Composites Part A: Applied Science and Manufacturing, 37(2), 216-221. doi:10.1016/j.compositesa.2005.09.021DOI: 10.1016/j.compositesa.2005.09.021
An approach to the simulation of fluid-structure interaction in the aortic valve (Journal article)
Carmody, C. J., Burriesci, G., Howard, I. C., & Patterson, E. A. (2006). An approach to the simulation of fluid-structure interaction in the aortic valve. JOURNAL OF BIOMECHANICS, 39(1), 158-169. doi:10.1016/j.jbiomech.2004.10.038DOI: 10.1016/j.jbiomech.2004.10.038
Determination of Impact Stresses in an Automotive Chain Drive Component (Conference Paper)
Dwyer-Joyce, R. S., Lewis, R., Ward, A., & Patterson, E. A. (n.d.). Determination of Impact Stresses in an Automotive Chain Drive Component. In SAE Technical Paper Series. SAE International. doi:10.4271/2006-01-0766DOI: 10.4271/2006-01-0766
Editorial (Journal article)
Patterson, E., & Yates, J. (n.d.). Editorial. Fatigue & Fracture of Engineering Materials & Structures, 29(1), 1-2. doi:10.1111/j.1460-2695.2006.00986.xDOI: 10.1111/j.1460-2695.2006.00986.x
Investigation of Crack Closure by Using Thermoeastic Stress Analysis (Conference Paper)
Marsavina, L., Tomlinson, R. A., Patterson, E. A., & Yates, J. R. (n.d.). Investigation of Crack Closure by Using Thermoeastic Stress Analysis. In Unknown Conference (pp. 443-444). Springer Netherlands. doi:10.1007/1-4020-4972-2_219DOI: 10.1007/1-4020-4972-2_219
Mixed Mode (I+II) Stress Intensity Factor Measurement Using Image Correlation (Conference Paper)
Shterenlikht, A., López-Crespo, P., Withers, P. J., Yates, J. R., & Patterson, E. A. (n.d.). Mixed Mode (I+II) Stress Intensity Factor Measurement Using Image Correlation. In Unknown Conference (pp. 427-428). Springer Netherlands. doi:10.1007/1-4020-4972-2_211DOI: 10.1007/1-4020-4972-2_211
Observations on photo-emission and the process zone of a fatigue crack (Journal article)
Patterson, E. A., Diaz, F. A., & Yates, J. R. (2007). Observations on photo-emission and the process zone of a fatigue crack. FATIGUE & FRACTURE MECHANICS, 35TH VOLUME, 35, 225-+. doi:10.1520/STP45517SDOI: 10.1520/STP45517S
University Spinouts and Student Start-Ups: A Study in Heat Transfer and Rocket Science? (Conference Paper)
Handscombe, R. D., Patterson, E. A., & Rodriguez-Falcon, E. (2006). University Spinouts and Student Start-Ups: A Study in Heat Transfer and Rocket Science?. In Engineering Technology Management: Engineering Business Management, Safety Engineering and Risk Analysis, Technology and Society. ASMEDC. doi:10.1115/imece2006-13285DOI: 10.1115/imece2006-13285
2005
Phase-stepping photoelasticity for quantifying the interfacial response in fibre composites at fibre-breaks (Journal article)
Zhao, F. M., Patterson, E. A., & Jones, F. R. (2005). Phase-stepping photoelasticity for quantifying the interfacial response in fibre composites at fibre-breaks. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 412(1-2), 83-87. doi:10.1016/j.msea.2005.08.039DOI: 10.1016/j.msea.2005.08.039
Design of reference materials and standardised tests for optical strain measurement (Conference Paper)
Burguete, R., Hack, E., Kujawinska, M., Patterson, E., Saleem, Q., Siebert, T., & Whelan, M. (2005). Design of reference materials and standardised tests for optical strain measurement. In Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics (pp. 737-743).
Differential thermography reveals crack tip behaviour? (Conference Paper)
Diaz, F. A., Patterson, E. A., & Yates, J. R. (2005). Differential thermography reveals crack tip behaviour?. In Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics (pp. 1413-1418).
Simple demonstrations to teach geometric, shadow, and projection moiré (Conference Paper)
Cloud, G., & Patterson, E. (2005). Simple demonstrations to teach geometric, shadow, and projection moiré. In Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics (pp. 1431-1435).
Recent issues on development of reference materials and standardized tests of optical methods of strain measurement (Conference Paper)
Burguete, R., Hack, E., Kujawinska, M., Patterson, E., Salbut, L., Saleem, Q., . . . Whelan, M. (2005). Recent issues on development of reference materials and standardized tests of optical methods of strain measurement. In W. Osten, C. Gorecki, & E. L. Novak (Eds.), SPIE Proceedings. SPIE. doi:10.1117/12.621586DOI: 10.1117/12.621586
Location and shape measurement using a portable fringe projection system (Journal article)
Ortiz, M. H., & Patterson, E. A. (2005). Location and shape measurement using a portable fringe projection system. EXPERIMENTAL MECHANICS, 45(3), 197-204. doi:10.1177/0014485105053801DOI: 10.1177/0014485105053801
A new photoelastic model for studying fatigue crack closure (Journal article)
Pacey, M. N., James, M. N., & Patterson, E. A. (2005). A new photoelastic model for studying fatigue crack closure. EXPERIMENTAL MECHANICS, 45(1), 42-52. doi:10.1177/0014485105050005DOI: 10.1177/0014485105050005
An investigation of the influence of macroscopic heterogeneity on the thermoelastic response of fibre reinforced plastics (Journal article)
Pitarresi, G., Found, M. S., & Patterson, E. A. (2005). An investigation of the influence of macroscopic heterogeneity on the thermoelastic response of fibre reinforced plastics. COMPOSITES SCIENCE AND TECHNOLOGY, 65(2), 269-280. doi:10.1016/j.compscitech.2004.07.008DOI: 10.1016/j.compscitech.2004.07.008
A robust approach to demodulating and unwrapping phase-stepped photoelastic data (Journal article)
Siegmann, R., Backman, D., & Patterson, E. A. (2005). A robust approach to demodulating and unwrapping phase-stepped photoelastic data. EXPERIMENTAL MECHANICS, 45(3), 278-289. Retrieved from https://www.webofscience.com/
Embedded enterprise learning: About, through, for and from (Conference Paper)
Handscombe, R. D., Rodriguez-Falcon, E., & Patterson, E. A. (2005). Embedded enterprise learning: About, through, for and from. In PROCEEDINGS OF IMECE 2005: ENGINEERING/TECHNOLOGY MANAGEMENT (pp. 305-314). Retrieved from https://www.webofscience.com/
On the calibration of optical full-field strain measurement systems (Conference Paper)
Whelan, M., Hack, E., Siebert, T., Burguete, R., Patterson, E. A., & Saleem, Q. (2005). On the calibration of optical full-field strain measurement systems. In Advances in Experimental Mechanics IV Vol. 3-4 (pp. 397-402). doi:10.4028/www.scientific.net/AMM.3-4.397DOI: 10.4028/www.scientific.net/AMM.3-4.397
Photoelastic analysis of matrix stresses around a high modulus sapphire fibre by means of phase-stepping automated polariscope (Conference Paper)
Zhao, F. M., Martin, R. D. S., Hayes, S. A., Patterson, E. A., Young, R. J., & Jones, F. R. (2005). Photoelastic analysis of matrix stresses around a high modulus sapphire fibre by means of phase-stepping automated polariscope. In COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING Vol. 36 (pp. 229-244). doi:10.1016/j.compositesa.2004.06.033DOI: 10.1016/j.compositesa.2004.06.033
Standard test for the evaluation of optical strain measurement systems (Conference Paper)
Patterson, E. A., Whelan, M., Hack, E., Siebert, T., Burguete, R., & Saleem, Q. (2005). Standard test for the evaluation of optical strain measurement systems. In Advances in Experimental Mechanics IV Vol. 3-4 (pp. 403-408). doi:10.4028/www.scientific.net/AMM.3-4.403DOI: 10.4028/www.scientific.net/AMM.3-4.403
Traceability of optical techniques for strain measurement (Conference Paper)
Hack, E., Burguete, R., & Patterson, E. A. (2005). Traceability of optical techniques for strain measurement. In Advances in Experimental Mechanics IV Vol. 3-4 (pp. 391-396). doi:10.4028/www.scientific.net/AMM.3-4.391DOI: 10.4028/www.scientific.net/AMM.3-4.391
2004
Path dependency in thermoelastic stress analysis (Journal article)
Estrada, J. R. E., & Patterson, E. A. (2004). Path dependency in thermoelastic stress analysis. EXPERIMENTAL MECHANICS, 44(6), 567-573. doi:10.1177/0014485104049395DOI: 10.1177/0014485104049395
Development of standard measurement chain for full-field optical strain measurement methods (Conference Paper)
Salbut, L., Kujawinska, M., Patterson, E., Hack, E., Burguete, R., Whelan, M. P., & Mendels, D. A. (2004). Development of standard measurement chain for full-field optical strain measurement methods. In W. Osten, & E. Novak (Eds.), SPIE Proceedings. SPIE. doi:10.1117/12.560939DOI: 10.1117/12.560939
Synchrotron diffraction investigation of the distribution and influence of residual stresses in fatigue (Journal article)
James, M. N., Hattingh, D. G., Hughes, D. J., Wei, L. W., Patterson, E. A., & Da Fonseca, J. Q. (2004). Synchrotron diffraction investigation of the distribution and influence of residual stresses in fatigue. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 27(7), 609-622. doi:10.1111/j.1460-2695.2004.00789.xDOI: 10.1111/j.1460-2695.2004.00789.x
Design and evaluation of the poleidoscope: A novel digital polariscope (Journal article)
Lesniak, J., Zhang, S. J., & Patterson, E. A. (2004). Design and evaluation of the poleidoscope: A novel digital polariscope. EXPERIMENTAL MECHANICS, 44(2), 128-135. doi:10.1177/0014485104042450DOI: 10.1177/0014485104042450
Some improvements in the analysis of fatigue cracks using thermoelasticity (Journal article)
Diaz, F. A., Yates, J. R., & Patterson, E. A. (2004). Some improvements in the analysis of fatigue cracks using thermoelasticity. INTERNATIONAL JOURNAL OF FATIGUE, 26(4), 365-376. doi:10.1016/j.ijfatigue.2003.08.018DOI: 10.1016/j.ijfatigue.2003.08.018
An integrated approach to modelling the fluid-structure interaction of a collapsible tube (Journal article)
Scroggs, R. A., Beck, S. B. M., & Patterson, E. A. (2004). An integrated approach to modelling the fluid-structure interaction of a collapsible tube. JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 47(1), 20-28. doi:10.1299/jsmeb.47.20DOI: 10.1299/jsmeb.47.20
Measuring stress intensity factors during fatigue crack growth using thermoelasticity (Journal article)
Diaz, F. A., Patterson, E. A., Tomlinson, R. A., & Yates, J. R. (2004). Measuring stress intensity factors during fatigue crack growth using thermoelasticity. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 27(7), 571-583. doi:10.1111/j.1460-2695.2004.00782.xDOI: 10.1111/j.1460-2695.2004.00782.x
Mixed mode (K-I+K-II) stress intensity factor measurement by electronic speckle pattern interferometry and image correlation (Conference Paper)
Shterenlikht, A., Garrido, F. A. D., Crespo, P. L., Withers, P. J., & Patterson, E. A. (2004). Mixed mode (K-I+K-II) stress intensity factor measurement by electronic speckle pattern interferometry and image correlation. In Advances in Experimental Mechanics Vol. 1-2 (pp. 107-112). doi:10.4028/www.scientific.net/AMM.1-2.107DOI: 10.4028/www.scientific.net/AMM.1-2.107
Optical analysis of crack tip stress fields: a comparative study (Journal article)
Patterson, E. A., & Olden, E. J. (2004). Optical analysis of crack tip stress fields: a comparative study. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 27(7), 623-635. doi:10.1111/j.1460-2695.2004.00774.xDOI: 10.1111/j.1460-2695.2004.00774.x
The Entropy Vector (Book)
Handscombe, R. D., & Patterson, E. A. (2004). The Entropy Vector. WORLD SCIENTIFIC. doi:10.1142/5365DOI: 10.1142/5365
2003
A novel instrument for transient photoelasticity (Journal article)
Hobbs, J. W., Greene, R. J., & Patterson, E. A. (2003). A novel instrument for transient photoelasticity. EXPERIMENTAL MECHANICS, 43(4), 403-409. Retrieved from https://www.webofscience.com/
Deformation data from thermal marking (Journal article)
Ortiz, M. H., Patterson, E. A., & Lesniak, J. R. (2003). Deformation data from thermal marking. STRAIN, 39(4), 149-152. Retrieved from https://www.webofscience.com/
On the opening mechanism of the aortic valve: some observations from simulations. (Journal article)
Howard, I. C., Patterson, E. A., & Yoxall, A. (2003). On the opening mechanism of the aortic valve: some observations from simulations.. Journal of medical engineering & technology, 27(6), 259-266. doi:10.1080/0309190031000096621DOI: 10.1080/0309190031000096621
Investigation into the effect of the nut thread run-out on the stress distribution in a bolt using the finite element method (Journal article)
Hobbs, J. W., Burguete, R. L., & Patterson, E. A. (2003). Investigation into the effect of the nut thread run-out on the stress distribution in a bolt using the finite element method. JOURNAL OF MECHANICAL DESIGN, 125(3), 527-532. doi:10.1115/1.1567312DOI: 10.1115/1.1567312
On the industrial applications of moire and fringe projection techniques (Journal article)
Heredia-Ortiz, M., & Patterson, E. A. (2003). On the industrial applications of moire and fringe projection techniques. STRAIN, 39(3), 95-100. doi:10.1046/j.1475-1305.2003.00072.xDOI: 10.1046/j.1475-1305.2003.00072.x
A review of the general theory of thermoelastic stress analysis (Journal article)
Pitarresi, G., & Patterson, E. A. (2003). A review of the general theory of thermoelastic stress analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 38(5), 405-417. doi:10.1243/03093240360713469DOI: 10.1243/03093240360713469
On the use of stereolithography for the manufacture of photoelastic models (Journal article)
Curtis, J. D., Hanna, S. D., Patterson, E. A., & Taroni, M. (2003). On the use of stereolithography for the manufacture of photoelastic models. EXPERIMENTAL MECHANICS, 43(2), 148-162. doi:10.1177/0014485103043002005DOI: 10.1177/0014485103043002005
Integrating thermoelastic and numerical stress methods for reliable analysis (Journal article)
Greene, R. J., & Patterson, E. A. (2003). Integrating thermoelastic and numerical stress methods for reliable analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 38(4), 303-312. doi:10.1243/03093240360692896DOI: 10.1243/03093240360692896
Characterisation of plasticity-induced closure-crack flank contact force versus plastic enclave (Journal article)
James, M. N., Pacey, M. N., Wei, L. W., & Patterson, E. A. (2003). Characterisation of plasticity-induced closure-crack flank contact force versus plastic enclave. ENGINEERING FRACTURE MECHANICS, 70(17), 2473-2487. doi:10.1016/S0013-7944(02)00273-4DOI: 10.1016/S0013-7944(02)00273-4
Measurement of micro stress fields in epoxy matrix around a fibre using phase-stepping automated photoelasticity (Journal article)
Zhao, F. M., Hayes, S. A., Patterson, E. A., Young, R. J., & Jones, F. R. (2003). Measurement of micro stress fields in epoxy matrix around a fibre using phase-stepping automated photoelasticity. COMPOSITES SCIENCE AND TECHNOLOGY, 63(12), 1783-1787. doi:10.1016/S0266-3538(03)00131-3DOI: 10.1016/S0266-3538(03)00131-3
2002
The use of phase-stepping for the measurement of characteristic parameters in integrated photoelasticity (Journal article)
Tomlinson, R. A., & Patterson, E. A. (2002). The use of phase-stepping for the measurement of characteristic parameters in integrated photoelasticity. EXPERIMENTAL MECHANICS, 42(1), 43-50. Retrieved from https://www.webofscience.com/
Digital Photoelasticity: Principles, Practice and Potential Measurements Lecture (Journal article)
Patterson, E. A. (2002). Digital Photoelasticity: Principles, Practice and Potential Measurements Lecture. STRAIN, 38(1), 27-39. doi:10.1046/j.0039-2103.2002.00004.xDOI: 10.1046/j.0039-2103.2002.00004.x
2001
Comparison of numerical and experimental analyses for contact problems under normal and tangential loads (Conference Paper)
Burguete, R. L., & Patterson, E. A. (2001). Comparison of numerical and experimental analyses for contact problems under normal and tangential loads. In PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING Vol. 215 (pp. 113-123). doi:10.1243/0954410011531817DOI: 10.1243/0954410011531817
A photoelastic analysis of crescent-shaped cracks in bolts (Journal article)
Hobbs, J., Burguete, R., Heyes, P., & Patterson, E. (2001). A photoelastic analysis of crescent-shaped cracks in bolts. The Journal of Strain Analysis for Engineering Design, 36(1), 93-100. doi:10.1243/0309324011512649DOI: 10.1243/0309324011512649
Development of a three-dimensional biomechanics model to simulate head impact (Conference Paper)
Calixte, O., Howard, I. C., & Patterson, E. A. (2001). Development of a three-dimensional biomechanics model to simulate head impact. In COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3 (pp. 379-385). Retrieved from https://www.webofscience.com/
Modelling the motions of aortic wall, valve leaflets and sinuses under fluid flows induced by ventricle contraction (Conference Paper)
Carmody, C. J., Howard, I. C., & Patterson, E. A. (2001). Modelling the motions of aortic wall, valve leaflets and sinuses under fluid flows induced by ventricle contraction. In COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3 (pp. 693-699). Retrieved from https://www.webofscience.com/
2000
A novel instrument for automated principal strain separation in reflection photoelasticity (Journal article)
Pacey, M. N., Haake, S. J., & Patterson, E. A. (2000). A novel instrument for automated principal strain separation in reflection photoelasticity. JOURNAL OF TESTING AND EVALUATION, 28(4), 229-235. Retrieved from https://www.webofscience.com/
A novel instrument for dynamic photoelasticity (Conference Paper)
Hobbs, J. W., Greene, R. J., & Patterson, E. A. (2000). A novel instrument for dynamic photoelasticity. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 940-942). Retrieved from https://www.webofscience.com/
A rational decision making model for experimental mechanics (Journal article)
Olden, E. J., & Patterson, E. A. (2000). A rational decision making model for experimental mechanics. EXPERIMENTAL TECHNIQUES, 24(4), 26-32. doi:10.1111/j.1747-1567.2000.tb00922.xDOI: 10.1111/j.1747-1567.2000.tb00922.x
Applications of an automated instrument for principal strain separation (Conference Paper)
Pacey, M. N., Yoxall, A., Haake, S. J., & Patterson, E. A. (2000). Applications of an automated instrument for principal strain separation. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 14-17). Retrieved from https://www.webofscience.com/
Automated photoelasticity applied with thermoelasticity to real components (Conference Paper)
Barone, S., Wang, Z. F., & Patterson, E. A. (2000). Automated photoelasticity applied with thermoelasticity to real components. In IUTAM SYMPOSIUM ON ADVANCED OPTICAL METHODS AND APPLICATIONS IN SOLID MECHANICS Vol. 82 (pp. 305-312). Retrieved from https://www.webofscience.com/
Comparative photoelastic analysis of elliptical cracks in a compressor disc (Conference Paper)
Taroni, M., & Patterson, E. A. (2000). Comparative photoelastic analysis of elliptical cracks in a compressor disc. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 100-103). Retrieved from https://www.webofscience.com/
Developments in photoelastic stress separation using the DCT method (Conference Paper)
Nurse, A. D., & Patterson, E. A. (2000). Developments in photoelastic stress separation using the DCT method. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 860-861). Retrieved from https://www.webofscience.com/
Finite element and photoelastic analysis of a nut and bolt (Conference Paper)
Hobbs, J. W., Patterson, E. A., Burguete, R. L., & Heyes, P. F. (2000). Finite element and photoelastic analysis of a nut and bolt. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 359-362). Retrieved from https://www.webofscience.com/
Image enhancement in digital reflection photoelasticity using a Butterworth filter (Conference Paper)
Zhang, S. J., & Patterson, E. A. (2000). Image enhancement in digital reflection photoelasticity using a Butterworth filter. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 865-868). Retrieved from https://www.webofscience.com/
Improving the analysis of reflection caustics (Conference Paper)
Carazo-Alvarez, J. D., & Patterson, E. A. (2000). Improving the analysis of reflection caustics. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 340-343). Retrieved from https://www.webofscience.com/
On the use of photoelasticity to study crack growth mechanisms (Conference Paper)
Pacey, M. N., James, M. N., & Patterson, E. A. (2000). On the use of photoelasticity to study crack growth mechanisms. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 375-378). Retrieved from https://www.webofscience.com/
Quantitative comparison of stress maps from numerical and experimental sources (Conference Paper)
Zhang, S. J., & Patterson, E. A. (2000). Quantitative comparison of stress maps from numerical and experimental sources. In PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS (pp. 290-293). Retrieved from https://www.webofscience.com/
Recording and processing digital caustic images from white light (Conference Paper)
Carazo-Alvarez, J. D., & Patterson, E. A. (2000). Recording and processing digital caustic images from white light. In INTERFEROMETRY IN SPECKLE LIGHT (pp. 599-606). Retrieved from https://www.webofscience.com/
The effect of eccentric loading on the fatigue performance of high-tensile bolts (Journal article)
Hobbs, J. W., Burguete, R. L., Heyes, P. F., & Patterson, E. A. (2000). The effect of eccentric loading on the fatigue performance of high-tensile bolts. INTERNATIONAL JOURNAL OF FATIGUE, 22(6), 531-538. doi:10.1016/S0142-1123(00)00004-9DOI: 10.1016/S0142-1123(00)00004-9
The strategic mismatch of industrial and university research (Journal article)
Handscombe, R. D., & Patterson, E. A. (2000). The strategic mismatch of industrial and university research. International Journal of Manufacturing Technology and Management, 2(1/2/3/4/5/6/7), 1013. doi:10.1504/ijmtm.2000.001389DOI: 10.1504/ijmtm.2000.001389
1999
Simulation of damage in a porcine prosthetic heart valve (Journal article)
Chew, G. G., Howard, I. C., & Patterson, E. A. (1999). Simulation of damage in a porcine prosthetic heart valve. JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY, 23(5), 178-189. Retrieved from https://www.webofscience.com/
On the feasibility of determining discrete photoelastic parameters using the multi-load method (Journal article)
Tomlinson, R. A., & Patterson, E. A. (1999). On the feasibility of determining discrete photoelastic parameters using the multi-load method. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 34(4), 295-299. doi:10.1243/0309324991513821DOI: 10.1243/0309324991513821
A general method for automated analysis of caustics (Journal article)
Carazo-Alvarez, J. D., & Patterson, E. A. (1999). A general method for automated analysis of caustics. OPTICS AND LASERS IN ENGINEERING, 32(2), 95-110. doi:10.1016/S0143-8166(99)00069-XDOI: 10.1016/S0143-8166(99)00069-X
A photoelastic study of plasticity induced crack wake contact stresses in polycarbonate specimens (Conference Paper)
Pacey, M. N., James, M. N., & Patterson, E. A. (1999). A photoelastic study of plasticity induced crack wake contact stresses in polycarbonate specimens. In FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4 (pp. 2819-2824). Retrieved from https://www.webofscience.com/
Computer techniques in assessing fatigue crack closure (Conference Paper)
Pacey, M. N., Wei, L. W., Patterson, E. A., & James, M. N. (1999). Computer techniques in assessing fatigue crack closure. In COMPASS 1999 : COMPONENT OPTIMISATION FROM MATERIALS PROPERTIES AND SIMULATION SOFTWARE (pp. 293-300). Retrieved from https://www.webofscience.com/
Influence of anisotropy on the mechanical behaviour of bioprosthetic heart valves (Journal article)
Burriesci, G., Howard, I. C., & Patterson, E. A. (1999). Influence of anisotropy on the mechanical behaviour of bioprosthetic heart valves. JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY, 23(6), 203-215. Retrieved from https://www.webofscience.com/
Integration of spectral and phase-stepping methods in photoelasticity (Journal article)
Patterson, E. A., & Wang, Z. F. (1999). Integration of spectral and phase-stepping methods in photoelasticity. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 34(1), 59-64. doi:10.1243/0309324991513632DOI: 10.1243/0309324991513632
Integration of spectral and phase-stepping methods in photoelasticity (vol 34, pg 59, 1999) (Journal article)
Patterson, E. A., & Wang, Z. F. (1999). Integration of spectral and phase-stepping methods in photoelasticity (vol 34, pg 59, 1999). JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 34(4), 302. Retrieved from https://www.webofscience.com/
The application of evolutionary and maximum entropy algorithms to photoelastic spectral analysis (Journal article)
Pacey, M. N., Wang, X. Z., Haake, S. J., & Patterson, E. A. (1999). The application of evolutionary and maximum entropy algorithms to photoelastic spectral analysis. EXPERIMENTAL MECHANICS, 39(4), 265-273. doi:10.1007/BF02329803DOI: 10.1007/BF02329803
The development of simultaneous thermo- and photo-elasticity for principal stress analyses (Journal article)
Barone, S., & Patterson, E. A. (1999). The development of simultaneous thermo- and photo-elasticity for principal stress analyses. STRAIN, 35(2), 57-65. doi:10.1111/j.1475-1305.1999.tb01127.xDOI: 10.1111/j.1475-1305.1999.tb01127.x
The effects of surface topography on the method of caustics (Journal article)
Tomlinson, R. A., & Patterson, E. A. (1999). The effects of surface topography on the method of caustics. EXPERIMENTAL MECHANICS, 39(4), 335-342. doi:10.1007/BF02329814DOI: 10.1007/BF02329814
1998
An alternative finite difference method for post-processing thermoelastic data using compatibility (Journal article)
Barone, S., & Patterson, E. A. (1998). An alternative finite difference method for post-processing thermoelastic data using compatibility. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 33(6), 437-447. doi:10.1243/0309324981513138DOI: 10.1243/0309324981513138
Polymer coating as a strain witness in thermoelasticity (Journal article)
Barone, S., & Patterson, E. A. (1998). Polymer coating as a strain witness in thermoelasticity. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 33(3), 223-232. doi:10.1243/0309324981512940DOI: 10.1243/0309324981512940
The effect of friction on crack propagation in the dovetail fixings of compressor discs (Journal article)
Burguete, R. L., & Patterson, E. A. (1998). The effect of friction on crack propagation in the dovetail fixings of compressor discs. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 212(3), 171-181. doi:10.1243/0954406981521132DOI: 10.1243/0954406981521132
A simulation of a polariscope for error analysis in automated photoelasticity (Conference Paper)
Ji, W. Y., & Patterson, E. A. (1998). A simulation of a polariscope for error analysis in automated photoelasticity. In EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 521-526). Retrieved from https://www.webofscience.com/
Birefringent behaviour of GRP laminates (Conference Paper)
Found, M. S., Patterson, E. A., & Brading, E. F. (1998). Birefringent behaviour of GRP laminates. In EXPERIMENTAL TECHNIQUES AND DESIGN IN COMPOSITE MATERIALS 3 Vol. 144 (pp. 243-250). doi:10.4028/www.scientific.net/KEM.144.243DOI: 10.4028/www.scientific.net/KEM.144.243
Comparison of experimental methods for determining stress intensity factors (Conference Paper)
Zhang, S. J., & Patterson, E. A. (1998). Comparison of experimental methods for determining stress intensity factors. In EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 1185-1190). Retrieved from https://www.webofscience.com/
Detection of fatigue crack closure using thermoelastic stress analysis (Conference Paper)
Batchelor, H., Patterson, E. A., & Yates, J. R. (1998). Detection of fatigue crack closure using thermoelastic stress analysis. In Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE.
Evaluating characteristic parameters in integrated photoelasticity (Conference Paper)
Tomlinson, R. A., & Patterson, E. A. (1998). Evaluating characteristic parameters in integrated photoelasticity. In EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 495-500). Retrieved from https://www.webofscience.com/
Integrated birefringence applied to solids and fluids - A review (Conference Paper)
Cen, M., Tomlinson, R. A., Patterson, E. A., & Hickman, L. J. (1998). Integrated birefringence applied to solids and fluids - A review. In EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 507-512). Retrieved from https://www.webofscience.com/
Simulation of errors in automated photoelasticity (Journal article)
Ji, W., & Patterson, E. A. (1998). Simulation of errors in automated photoelasticity. EXPERIMENTAL MECHANICS, 38(2), 132-139. doi:10.1007/BF02321656DOI: 10.1007/BF02321656
Simultaneous observation of phase-stepped images for automated photoelasticity (Journal article)
Patterson, E. A., & Wang, Z. F. (1998). Simultaneous observation of phase-stepped images for automated photoelasticity. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 33(1), 1-15. doi:10.1243/0309324981512779DOI: 10.1243/0309324981512779
Simultaneous observation of phase-stepped images for automated photoelasticity (vol 33, pg 1, 1998) (Journal article)
Patterson, E. A., & Wang, Z. F. (1998). Simultaneous observation of phase-stepped images for automated photoelasticity (vol 33, pg 1, 1998). JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 33(5), 400. Retrieved from https://www.webofscience.com/
Special issue on advanced optical techniques - A renaissance in optical techniques (Journal article)
Patterson, E. A. (1998). Special issue on advanced optical techniques - A renaissance in optical techniques. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 33(2), I-II. Retrieved from https://www.webofscience.com/
The application to mixed-mode cracks of a general methodology for automated analysis of caustics (Conference Paper)
Carazo-Alvarez, J. D., & Patterson, E. A. (1998). The application to mixed-mode cracks of a general methodology for automated analysis of caustics. In EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 1217-1222). Retrieved from https://www.webofscience.com/
1997
A photoelastic determination of stress intensity factors for corner cracks in a bolted joint (Journal article)
Gungor, S., & Patterson, E. A. (1997). A photoelastic determination of stress intensity factors for corner cracks in a bolted joint. JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 119(4), 276-280. doi:10.1115/1.2829108DOI: 10.1115/1.2829108
Three-dimensional stress analysis of polypropylene leaflets for prosthetic heart valves (Journal article)
Thornton, M. A., Howard, L. C., & Patterson, E. A. (1997). Three-dimensional stress analysis of polypropylene leaflets for prosthetic heart valves. MEDICAL ENGINEERING & PHYSICS, 19(6), 588-597. doi:10.1016/S1350-4533(96)00042-2DOI: 10.1016/S1350-4533(96)00042-2
A photoelastic study of the effect on subsurface stresses of the contact geometry and friction (Journal article)
Burguete, R. L., & Patterson, E. A. (1997). A photoelastic study of the effect on subsurface stresses of the contact geometry and friction. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 32(6), 425-433. doi:10.1243/0309324971513535DOI: 10.1243/0309324971513535
On the presence of bending stresses in inflated thin-walled structures (Journal article)
Chew, G. G., Howard, I. C., & Patterson, E. A. (1997). On the presence of bending stresses in inflated thin-walled structures. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 211(5), 341-348. doi:10.1243/0954406971522097DOI: 10.1243/0954406971522097
A comparison of analytical, finite element and photoelastic results for a cylinder in contact with an elastic half-space (Conference Paper)
Burguete, R. L., & Patterson, E. A. (1997). A comparison of analytical, finite element and photoelastic results for a cylinder in contact with an elastic half-space. In MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS (pp. 367-372). Retrieved from https://www.webofscience.com/
A photoelastic study of an angle crack specimen subject to mixed mode I-III displacements (Journal article)
Patterson, E. A., & Gungor, S. (1997). A photoelastic study of an angle crack specimen subject to mixed mode I-III displacements. ENGINEERING FRACTURE MECHANICS, 56(6), 767-778. doi:10.1016/S0013-7944(96)00130-0DOI: 10.1016/S0013-7944(96)00130-0
A photoelastic study of contact between a cylinder and a half-space (Journal article)
Burguete, R. L., & Patterson, E. A. (1997). A photoelastic study of contact between a cylinder and a half-space. EXPERIMENTAL MECHANICS, 37(3), 314-323. doi:10.1007/BF02317424DOI: 10.1007/BF02317424
A study of residual caustics generated from fatigue cracks (Journal article)
Tomlinson, R. A., & Patterson, E. A. (1997). A study of residual caustics generated from fatigue cracks. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 20(10), 1467-1479. doi:10.1111/j.1460-2695.1997.tb01503.xDOI: 10.1111/j.1460-2695.1997.tb01503.x
On determining stress intensity factors for mixed mode cracks from thermoelastic data (Journal article)
Tomlinson, R. A., Nurse, A. D., & Patterson, E. A. (1997). On determining stress intensity factors for mixed mode cracks from thermoelastic data. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 20(2), 217-226. doi:10.1111/j.1460-2695.1997.tb00279.xDOI: 10.1111/j.1460-2695.1997.tb00279.x
On image analysis for birefringence measurements in photoelasticity (Journal article)
Patterson, E. A., Ji, W., & Wang, Z. F. (1997). On image analysis for birefringence measurements in photoelasticity. OPTICS AND LASERS IN ENGINEERING, 28(1), 17-36. doi:10.1016/S0143-8166(96)00060-7DOI: 10.1016/S0143-8166(96)00060-7
1996
2D and 3D separation of stresses using automated photoelasticity (Journal article)
Haake, S. J., Patterson, E. A., & Wang, Z. F. (1996). 2D and 3D separation of stresses using automated photoelasticity. EXPERIMENTAL MECHANICS, 36(3), 269-276. doi:10.1007/BF02318018DOI: 10.1007/BF02318018
A comparative study of linear and nonlinear simulations of the leaflets in a bioprosthetic heart valve during the cardiac cycle (Journal article)
Patterson, E. A., Howard, I. C., & Thornton, M. A. (1996). A comparative study of linear and nonlinear simulations of the leaflets in a bioprosthetic heart valve during the cardiac cycle. JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY, 20(3), 95-108. doi:10.3109/03091909609008387DOI: 10.3109/03091909609008387
Experimental determination of stress intensity factors of cracks in sheet structures with bolted stiffeners (Journal article)
Gungor, S., Nurse, A. D., & Patterson, E. A. (1996). Experimental determination of stress intensity factors of cracks in sheet structures with bolted stiffeners. ENGINEERING FRACTURE MECHANICS, 53(4), 561-&. doi:10.1016/0013-7944(95)00154-9DOI: 10.1016/0013-7944(95)00154-9
Full-field separation of principal stresses by combined thermo- and photoelasticity (Journal article)
Barone, S., & Patterson, E. A. (1996). Full-field separation of principal stresses by combined thermo- and photoelasticity. EXPERIMENTAL MECHANICS, 36(4), 318-324. doi:10.1007/BF02328573DOI: 10.1007/BF02328573
Photomechanical properties of some birefringent polymers around their glass transition temperatures (Journal article)
Burguete, R. L., & Patterson, E. A. (1996). Photomechanical properties of some birefringent polymers around their glass transition temperatures. EXPERIMENTAL MECHANICS, 36(4), 399-403. doi:10.1007/BF02328584DOI: 10.1007/BF02328584
The effect of mean stress on the fatigue limit of high tensile bolts (vol 209, pg 257, 1995) (Journal article)
Burgate, R. L., & Patterson, E. A. (1996). The effect of mean stress on the fatigue limit of high tensile bolts (vol 209, pg 257, 1995). PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 210(2), 199. doi:10.1243/PIME_PROC_1996_210_187_02DOI: 10.1243/PIME_PROC_1996_210_187_02
1995
Distribution of load in an oral prosthesis system: an in vitro study. (Journal article)
Patterson, E. A., Burguete, R. L., Thoi, M. H., & Johns, R. B. (1995). Distribution of load in an oral prosthesis system: an in vitro study.. The International journal of oral & maxillofacial implants, 10(5), 552-560.
EXPERIMENTAL STRESS INTENSITY FACTORS FOR CRACKS IN A THIN-PLATE WITH STIFFENERS (Journal article)
NURSE, A. D., GUNGOR, S., & PATTERSON, E. A. (1995). EXPERIMENTAL STRESS INTENSITY FACTORS FOR CRACKS IN A THIN-PLATE WITH STIFFENERS. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 30(3), 235-240. doi:10.1243/03093247V303235DOI: 10.1243/03093247V303235
3D separation of stresses - 40 years on (Conference Paper)
HAAKE, S. J., WANG, Z. F., & PATTERSON, E. A. (1995). 3D separation of stresses - 40 years on. In PROCEEDINGS OF THE 1995 SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS (pp. 183-190). Retrieved from https://www.webofscience.com/
An intelligent automated polariscope for photoelastic analysis? (Conference Paper)
PATTERSON, E. A., & WANG, Z. F. (1995). An intelligent automated polariscope for photoelastic analysis?. In PROCEEDINGS OF THE 1995 SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS (pp. 336-341). Retrieved from https://www.webofscience.com/
Factors affecting the measurement of fatigue crack stress intensity factors using photoelastic coatings (Conference Paper)
Nurse, A. D., & Patterson, E. A. (1995). Factors affecting the measurement of fatigue crack stress intensity factors using photoelastic coatings. In Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 3 (pp. 239-246).
Photoelastic analysis using a full-field spectral analyser. (Conference Paper)
HAAKE, S. J., & PATTERSON, E. A. (1995). Photoelastic analysis using a full-field spectral analyser.. In PROCEEDINGS OF THE 1995 SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS (pp. 342-345). Retrieved from https://www.webofscience.com/
Study of contact loads by using image processing and non-linear regression with caustics (Conference Paper)
CARAZOALVAREZ, J., & PATTERSON, E. A. (1995). Study of contact loads by using image processing and non-linear regression with caustics. In PROCEEDINGS OF THE 1995 SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS (pp. 812-819). Retrieved from https://www.webofscience.com/
Study of the stress distribution in threads of bolts with cracks (Conference Paper)
Pacey, M. N., Burguete, R. L., & Patterson, E. A. (1995). Study of the stress distribution in threads of bolts with cracks. In Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 3 (pp. 255-262).
THE EFFECT OF ECCENTRIC LOADING ON THE STRESS-DISTRIBUTION IN THREAD ROOTS (Journal article)
BURGUETE, R. L., & PATTERSON, E. A. (1995). THE EFFECT OF ECCENTRIC LOADING ON THE STRESS-DISTRIBUTION IN THREAD ROOTS. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 18(11), 1333-1341. doi:10.1111/j.1460-2695.1995.tb00859.xDOI: 10.1111/j.1460-2695.1995.tb00859.x
THE EFFECT OF MEAN STRESS ON THE FATIGUE LIMIT OF HIGH-TENSILE BOLTS (Journal article)
BURGUETE, R. L., & PATTERSON, E. A. (1995). THE EFFECT OF MEAN STRESS ON THE FATIGUE LIMIT OF HIGH-TENSILE BOLTS. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 209(4), 257-262. doi:10.1243/PIME_PROC_1995_209_152_02DOI: 10.1243/PIME_PROC_1995_209_152_02
USE OF PHASE-STEPPING WITH DEMODULATION AND FUZZY-SETS FOR BIREFRINGENCE MEASUREMENT (Journal article)
WANG, Z. F., & PATTERSON, E. A. (1995). USE OF PHASE-STEPPING WITH DEMODULATION AND FUZZY-SETS FOR BIREFRINGENCE MEASUREMENT. OPTICS AND LASERS IN ENGINEERING, 22(2), 91-104. doi:10.1016/0143-8166(94)00024-5DOI: 10.1016/0143-8166(94)00024-5
1994
THE EFFECT OF BENDING ON THE NORMALIZED STRESS AT ROOTS OF THREADED CONNECTORS (Journal article)
BURGUETE, R. L., & PATTERSON, E. A. (1994). THE EFFECT OF BENDING ON THE NORMALIZED STRESS AT ROOTS OF THREADED CONNECTORS. JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 116(3), 163-166. doi:10.1115/1.2920145DOI: 10.1115/1.2920145
ARE HIP-FRACTURES CAUSED BY FALLING AND BREAKING OR BREAKING AND FALLING - PHOTOELASTIC STRESS-ANALYSIS (Journal article)
COTTON, D. W. K., WHITEHEAD, C. L., VYAS, S., COOPER, C., & PATTERSON, E. A. (1994). ARE HIP-FRACTURES CAUSED BY FALLING AND BREAKING OR BREAKING AND FALLING - PHOTOELASTIC STRESS-ANALYSIS. FORENSIC SCIENCE INTERNATIONAL, 65(2), 105-112. doi:10.1016/0379-0738(94)90265-8DOI: 10.1016/0379-0738(94)90265-8
COMPLETELY AUTOMATED PHOTOELASTIC FRINGE ANALYSIS (Journal article)
CARAZOALVAREZ, J., HAAKE, S. J., & PATTERSON, E. A. (1994). COMPLETELY AUTOMATED PHOTOELASTIC FRINGE ANALYSIS. OPTICS AND LASERS IN ENGINEERING, 21(3), 133-149. doi:10.1016/0143-8166(94)90067-1DOI: 10.1016/0143-8166(94)90067-1
DETERMINATION OF MODE-I, MODE-II AND MIXED-MODE STRESS INTENSITY FACTORS USING AUTOMATED POLARISCOPES (Conference Paper)
HAAKE, S. J., WANG, Z. F., PATTERSON, E. A., & NURSE, A. D. (1994). DETERMINATION OF MODE-I, MODE-II AND MIXED-MODE STRESS INTENSITY FACTORS USING AUTOMATED POLARISCOPES. In RECENT ADVANCES IN EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 189-194). Retrieved from https://www.webofscience.com/
Experimental evaluation of stress intensity factors for corner cracks in bolted joints (Conference Paper)
Gungor, S., & Patterson, E. A. (1994). Experimental evaluation of stress intensity factors for corner cracks in bolted joints. In Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 3 (pp. 243-247).
Non-linear finite element modelling of porcine bioprosthetic valves (Journal article)
Chew, G. G., Howard, I. C., & Patterson, E. A. (1994). Non-linear finite element modelling of porcine bioprosthetic valves. Engineering Failure Analysis, 1(3), 231-242. doi:10.1016/1350-6307(94)90021-3DOI: 10.1016/1350-6307(94)90021-3
PHOTOELASTIC MEASUREMENT OF STRESS INTENSITY FACTORS DURING A COMPLETE FATIGUE CYCLE (Conference Paper)
NURSE, A. D., & PATTERSON, E. A. (1994). PHOTOELASTIC MEASUREMENT OF STRESS INTENSITY FACTORS DURING A COMPLETE FATIGUE CYCLE. In RECENT ADVANCES IN EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 195-199). Retrieved from https://www.webofscience.com/
STRESS INTENSITY FACTORS FOR CRACKS AT FASTENER HOLES (Journal article)
NURSE, A. D., OBRIEN, E. W., & PATTERSON, E. A. (1994). STRESS INTENSITY FACTORS FOR CRACKS AT FASTENER HOLES. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 17(7), 791-799. doi:10.1111/j.1460-2695.1994.tb00810.xDOI: 10.1111/j.1460-2695.1994.tb00810.x
TIGHTENING CHARACTERISTICS FOR SCREWED JOINTS IN OSSEOINTEGRATED DENTAL IMPLANTS (Journal article)
BURGUETE, R. L., JOHNS, R. B., KING, T., & PATTERSON, E. A. (1994). TIGHTENING CHARACTERISTICS FOR SCREWED JOINTS IN OSSEOINTEGRATED DENTAL IMPLANTS. JOURNAL OF PROSTHETIC DENTISTRY, 71(6), 592-599. doi:10.1016/0022-3913(94)90443-XDOI: 10.1016/0022-3913(94)90443-X
1993
PHOTOELASTIC DETERMINATION OF FATIGUE-CRACK STRESS INTENSITY FACTORS (Conference Paper)
NURSE, A. D., & PATTERSON, E. A. (1993). PHOTOELASTIC DETERMINATION OF FATIGUE-CRACK STRESS INTENSITY FACTORS. In NONDESTRUCTIVE INSPECTION OF AGING AIRCRAFT Vol. 2001 (pp. 155-162). doi:10.1117/12.163841DOI: 10.1117/12.163841
DETERMINATION OF PREDOMINANTLY MODE-II STRESS INTENSITY FACTORS FROM ISOCHROMATIC DATA (Journal article)
NURSE, A. D., & PATTERSON, E. A. (1993). DETERMINATION OF PREDOMINANTLY MODE-II STRESS INTENSITY FACTORS FROM ISOCHROMATIC DATA. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 16(12), 1339-1354. doi:10.1111/j.1460-2695.1993.tb00743.xDOI: 10.1111/j.1460-2695.1993.tb00743.x
EVALUATION OF FULL FIELD AUTOMATED PHOTOELASTIC ANALYSIS BASED ON PHASE STEPPING (Journal article)
Haake, S. J., Wang, Z. F., & Patterson, E. A. (1993). EVALUATION OF FULL FIELD AUTOMATED PHOTOELASTIC ANALYSIS BASED ON PHASE STEPPING. Experimental Techniques, 17(6), 19-26. doi:10.1111/j.1747-1567.1993.tb00785.xDOI: 10.1111/j.1747-1567.1993.tb00785.x
EXPERIMENTAL-DETERMINATION OF STRESS INTENSITY FACTORS FOR CRACKS IN TURBINE DISKS (Journal article)
NURSE, A. D., & PATTERSON, E. A. (1993). EXPERIMENTAL-DETERMINATION OF STRESS INTENSITY FACTORS FOR CRACKS IN TURBINE DISKS. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 16(3), 315-325. doi:10.1111/j.1460-2695.1993.tb00089.xDOI: 10.1111/j.1460-2695.1993.tb00089.x
Effect of bending on the SCFs at roots of threaded connectors (Conference Paper)
Burguete, R. L., & Patterson, E. A. (1993). Effect of bending on the SCFs at roots of threaded connectors. In Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE (pp. 825-829).
THE PRACTICAL USE OF VIRTUAL REFLECTION CAUSTICS (Journal article)
KITCHIN, R. A., & PATTERSON, E. A. (1993). THE PRACTICAL USE OF VIRTUAL REFLECTION CAUSTICS. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 16(6), 597-602. doi:10.1111/j.1460-2695.1993.tb00105.xDOI: 10.1111/j.1460-2695.1993.tb00105.x
The dispersion of birefringence in photoelastic materials (Journal article)
Haake, S. J., & Patterson, E. A. (1993). The dispersion of birefringence in photoelastic materials. Strain, 29(1), 3-7. doi:10.1111/j.1475-1305.1993.tb00819.xDOI: 10.1111/j.1475-1305.1993.tb00819.x
1992
PHOTOELASTIC ANALYSIS OF FROZEN STRESSED SPECIMENS USING SPECTRAL-CONTENTS ANALYSIS (Journal article)
HAAKE, S. J., & PATTERSON, E. A. (1992). PHOTOELASTIC ANALYSIS OF FROZEN STRESSED SPECIMENS USING SPECTRAL-CONTENTS ANALYSIS. EXPERIMENTAL MECHANICS, 32(3), 266-272. doi:10.1007/BF02319365DOI: 10.1007/BF02319365
3-DIMENSIONAL PHOTOELASTIC MODEL OF FEMORAL-NECK FRACTURE (Journal article)
WHITEHEAD, C. L., PATTERSON, E. A., & COTTON, D. W. K. (1992). 3-DIMENSIONAL PHOTOELASTIC MODEL OF FEMORAL-NECK FRACTURE. JOURNAL OF PATHOLOGY, 168, A111. Retrieved from https://www.webofscience.com/
A 3-DIMENSIONAL ANALYSIS OF A BIOPROSTHETIC HEART-VALVE - RESPONSE (Journal article)
BLACK, M. M., HOWARD, I. C., HUANG, X., & PATTERSON, E. A. (1992). A 3-DIMENSIONAL ANALYSIS OF A BIOPROSTHETIC HEART-VALVE - RESPONSE. JOURNAL OF BIOMECHANICS, 25(9), 1097. doi:10.1016/0021-9290(92)90047-5DOI: 10.1016/0021-9290(92)90047-5
EVALUATION OF FULL FIELD AUTOMATED PHOTOELASTIC ANALYSIS BASED ON PHASE STEPPING (Conference Paper)
HAAKE, S. J., WANG, Z. F., & PATTERSON, E. A. (1992). EVALUATION OF FULL FIELD AUTOMATED PHOTOELASTIC ANALYSIS BASED ON PHASE STEPPING. In PROCEEDINGS OF THE VII INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS, VOLS 1 AND 2 (pp. 505-512). Retrieved from https://www.webofscience.com/
PHOTOELASTIC COATINGS APPLIED TO CRACKED PLATES (Conference Paper)
NURSE, A. D., & PATTERSON, E. A. (1992). PHOTOELASTIC COATINGS APPLIED TO CRACKED PLATES. In EXPERIMENTAL MECHANICS : TECHNOLOGY TRANSFER BETWEEN HIGH TECH ENGINEERING AND BIOMECHANICS Vol. 3 (pp. 477-490). Retrieved from https://www.webofscience.com/
The determination of principal stresses from photoelastic data (Journal article)
Haake, S. J., & Patterson, E. A. (1992). The determination of principal stresses from photoelastic data. Strain, 28(4), 153-158. doi:10.1111/j.1475-1305.1992.tb00812.xDOI: 10.1111/j.1475-1305.1992.tb00812.x
Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. (Journal article)
Patterson, E. A., & Johns, R. B. (1992). Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants.. The International journal of oral & maxillofacial implants, 7(1), 26-33.
Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental lmplants (Journal article)
Patterson, E. A., & Johns, R. B. (1992). Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental lmplants. International Journal of Oral and Maxillofacial Implants, 7(1), 1-9.
1991
A 3-DIMENSIONAL ANALYSIS OF A BIOPROSTHETIC HEART-VALVE (Journal article)
BLACK, M. M., HOWARD, I. C., HUANG, X., & PATTERSON, E. A. (1991). A 3-DIMENSIONAL ANALYSIS OF A BIOPROSTHETIC HEART-VALVE. JOURNAL OF BIOMECHANICS, 24(9), 793-&. doi:10.1016/0021-9290(91)90304-6DOI: 10.1016/0021-9290(91)90304-6
ADVANTAGES AND DISADVANTAGES IN THE APPLICATION OF PHASE-STEPPING IN PHOTOELASTICITY (Conference Paper)
PATTERSON, E. A., & WANG, Z. F. (1991). ADVANTAGES AND DISADVANTAGES IN THE APPLICATION OF PHASE-STEPPING IN PHOTOELASTICITY. In APPLIED SOLID MECHANICS - 4 Vol. 4 (pp. 358-373). Retrieved from https://www.webofscience.com/
ASSESSMENT OF OSTEOPOROSIS AT AUTOPSY - MECHANICAL METHODS COMPARED TO RADIOLOGICAL AND HISTOLOGICAL TECHNIQUES (Journal article)
WILKINSON, J. M., COTTON, D. W. K., HARRIS, S. C., & PATTERSON, E. A. (1991). ASSESSMENT OF OSTEOPOROSIS AT AUTOPSY - MECHANICAL METHODS COMPARED TO RADIOLOGICAL AND HISTOLOGICAL TECHNIQUES. MEDICINE SCIENCE AND THE LAW, 31(1), 19-24. doi:10.1177/002580249103100105DOI: 10.1177/002580249103100105
Contact stress distributions in a turbine disc dovetail type joint - a comparison of photoelastic and finite element results (Journal article)
Kenny, B., Patterson, E. A., Said, M., & Aradhya, K. S. S. (1991). Contact stress distributions in a turbine disc dovetail type joint - a comparison of photoelastic and finite element results. Strain, 27(1), 21-24. doi:10.1111/j.1475-1305.1991.tb00744.xDOI: 10.1111/j.1475-1305.1991.tb00744.x
Towards full field automated photoelastic analysis of complex components (Journal article)
Patterson, E. A., & Wang, Z. F. (1991). Towards full field automated photoelastic analysis of complex components. Strain, 27(2), 49-53. doi:10.1111/j.1475-1305.1991.tb00752.xDOI: 10.1111/j.1475-1305.1991.tb00752.x
1990
A 2-DIMENSIONAL FINITE-ELEMENT ANALYSIS OF A BIOPROSTHETIC HEART-VALVE (Journal article)
HUANG, X., BLACK, M. M., HOWARD, I. C., & PATTERSON, E. A. (1990). A 2-DIMENSIONAL FINITE-ELEMENT ANALYSIS OF A BIOPROSTHETIC HEART-VALVE. JOURNAL OF BIOMECHANICS, 23(8), 753-762. doi:10.1016/0021-9290(90)90022-UDOI: 10.1016/0021-9290(90)90022-U
A COMPARATIVE-STUDY OF METHODS FOR ESTIMATING BOLT FATIGUE LIMITS (Journal article)
PATTERSON, E. A. (1990). A COMPARATIVE-STUDY OF METHODS FOR ESTIMATING BOLT FATIGUE LIMITS. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 13(1), 59-81. doi:10.1111/j.1460-2695.1990.tb00577.xDOI: 10.1111/j.1460-2695.1990.tb00577.x
A PHOTOELASTIC TECHNIQUE TO PREDICT THE DIRECTION OF EDGE CRACK EXTENSION USING BLUNT CRACKS (Journal article)
NURSE, A. D., & PATTERSON, E. A. (1990). A PHOTOELASTIC TECHNIQUE TO PREDICT THE DIRECTION OF EDGE CRACK EXTENSION USING BLUNT CRACKS. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 32(3), 253-&. doi:10.1016/0020-7403(90)90021-ADOI: 10.1016/0020-7403(90)90021-A
ASSESSMENT OF OSTEOPOROSIS AT AUTOPSY - MECHANICAL METHODS COMPARED TO RADIOLOGICAL AND HISTOLOGICAL TECHNIQUES (Journal article)
WILKINSON, J. M., COTTON, D. W. K., PATTERSON, E. A., & HARRIS, S. C. (1990). ASSESSMENT OF OSTEOPOROSIS AT AUTOPSY - MECHANICAL METHODS COMPARED TO RADIOLOGICAL AND HISTOLOGICAL TECHNIQUES. JOURNAL OF PATHOLOGY, 160(2), A175. Retrieved from https://www.webofscience.com/
Fatigue limit prediction for bolts in tension (Conference Paper)
Patterson, E. A. (1990). Fatigue limit prediction for bolts in tension. In Proceedings of the International Offshore Mechanics and Arctic Engineering Symposium Vol. 3 (pp. 277-283).
PHOTOELASTIC ANALYSIS OF DOVETAIL JOINTS FOR TURBINE-BLADES (Conference Paper)
KENNY, B., PATTERSON, E. A., & ARADHYA, K. S. S. (1990). PHOTOELASTIC ANALYSIS OF DOVETAIL JOINTS FOR TURBINE-BLADES. In APPLIED STRESS ANALYSIS (pp. 566-574). Retrieved from https://www.webofscience.com/
1989
FATIGUE EVALUATION FOR FIXTURE SCREWS IN BRANEMARK OSSEOINTEGRATED DENTAL PROSTHESES (Journal article)
BROOKESMITH, M., JOHNS, R. B., & PATTERSON, E. A. (1989). FATIGUE EVALUATION FOR FIXTURE SCREWS IN BRANEMARK OSSEOINTEGRATED DENTAL PROSTHESES. JOURNAL OF DENTAL RESEARCH, 68(4), 639. Retrieved from https://www.webofscience.com/
1988
Automated photoelastic analysis (Journal article)
Patterson, E. A. (1988). Automated photoelastic analysis. Strain, 24(1), 15-20. doi:10.1111/j.1475-1305.1988.tb00650.xDOI: 10.1111/j.1475-1305.1988.tb00650.x
1987
STRESS-ANALYSIS OF SOME NUT-BOLT CONNECTIONS WITH MODIFICATIONS TO THE EXTERNAL SHAPE OF THE NUT (Journal article)
PATTERSON, E. A., & KENNY, B. (1987). STRESS-ANALYSIS OF SOME NUT-BOLT CONNECTIONS WITH MODIFICATIONS TO THE EXTERNAL SHAPE OF THE NUT. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 22(4), 187-193. doi:10.1243/03093247V224187DOI: 10.1243/03093247V224187
PHOTOELASTIC ANALYSIS OF FEMORAL-NECK FRACTURES (Journal article)
VYAS, S., PATTERSON, E. A., COOPER, C., & COTTON, D. W. K. (1987). PHOTOELASTIC ANALYSIS OF FEMORAL-NECK FRACTURES. JOURNAL OF PATHOLOGY, 152(3), A204.
1986
THE OPTIMIZATION OF THE DESIGN OF NUTS WITH PARTLY TAPERED THREADS (Journal article)
PATTERSON, E. A., & KENNY, B. (1986). THE OPTIMIZATION OF THE DESIGN OF NUTS WITH PARTLY TAPERED THREADS. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 21(2), 77-84. doi:10.1243/03093247V212077DOI: 10.1243/03093247V212077
A MODIFICATION TO THE THEORY FOR THE LOAD DISTRIBUTION IN CONVENTIONAL NUTS AND BOLTS (Journal article)
PATTERSON, E. A., & KENNY, B. (1986). A MODIFICATION TO THE THEORY FOR THE LOAD DISTRIBUTION IN CONVENTIONAL NUTS AND BOLTS. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 21(1), 17-23. doi:10.1243/03093247V211017DOI: 10.1243/03093247V211017
1985
LOAD AND STRESS-DISTRIBUTION IN SCREW THREADS (Journal article)
KENNY, B., & PATTERSON, E. A. (1985). LOAD AND STRESS-DISTRIBUTION IN SCREW THREADS. EXPERIMENTAL MECHANICS, 25(3), 208-213. doi:10.1007/BF02325089DOI: 10.1007/BF02325089
STRESS-ANALYSIS OF SOME NUT BOLT CONNECTIONS WITH MODIFICATIONS TO THE NUT THREAD FORM (Journal article)
KENNY, B., & PATTERSON, E. A. (1985). STRESS-ANALYSIS OF SOME NUT BOLT CONNECTIONS WITH MODIFICATIONS TO THE NUT THREAD FORM. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 20(1), 35-40. doi:10.1243/03093247V201035DOI: 10.1243/03093247V201035
The use of a microdensitometer in photoelastic analyses (Journal article)
Kenny, B., & Patterson, E. A. (1985). The use of a microdensitometer in photoelastic analyses. Strain, 21(1), 13-18. doi:10.1111/j.1475-1305.1985.tb00562.xDOI: 10.1111/j.1475-1305.1985.tb00562.x
1984
A MATHEMATICAL-MODEL FOR PERCHED BLOCK FORMATION (Journal article)
PATTERSON, E. A. (1984). A MATHEMATICAL-MODEL FOR PERCHED BLOCK FORMATION. JOURNAL OF GLACIOLOGY, 30(106), 296-301. doi:10.3189/S0022143000006122DOI: 10.3189/S0022143000006122
SIGHTINGS OF MUSKOXEN IN NORTHERN SCORESBY LAND, GREENLAND (Journal article)
PATTERSON, E. A. (1984). SIGHTINGS OF MUSKOXEN IN NORTHERN SCORESBY LAND, GREENLAND. ARCTIC, 37(1), 61-63.