Prof Chris Sutcliffe MEng PhD AMIMechE

Research Grants

Development of Laser Additive Manufacturing of Refractory Metals

AWE MANAGEMENT LTD (UK)

June 2018 - August 2024

Advanced veterinary devices

FUSION IMPLANTS LTD (UK)

January 2014 - May 2017

Reactive Metal Jet Fusion Printing

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

July 2017 - September 2021

Load Shifting Humeral Osteotomies for Canine Elbow Dysplasia

FUSION IMPLANTS LTD (UK)

October 2017 - September 2021

Towards Additive Manufacturing Process Control using Semi-Supervised Learning

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

June 2017 - April 2018

Manufacturing with Light 2: photochemical ALD to manufacture functional thin films.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

December 2015 - December 2018

High Throughput Selective Laser Melting.

RENISHAW PLC (UK)

October 2015 - October 2018

Project on Optimal Point Placement and Multi-Level Material Consolidation (Tetris Scanning)

RENISHAW PLC (UK)

September 2016 - August 2021

Arcam Equipment

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2014 - September 2016

Microengineering of Quadrupole Mass Spectrometers using RP techniques

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

November 2007 - October 2008

Selective laser melting of high aspect ratio 3D microelectromechanical (MEM) devices and components - an engineering of functional materials proposal.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

March 2005 - August 2006

Direct Route to the Production of Metallic Components Using Selective Laser Sintering Technology.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2001 - September 2004

KEL12/27 - Dynamic fatigue & initial stability testing of dental implants manufactured by SLM

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

June 2012 - September 2012

Micro laser cutting of thin sections.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

December 1998 - November 2001

Innovative Manufacturing Technology Research Centre.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

March 2003 - February 2006

KEL09/07 - Design, development and manufacture of novel porous dental devices

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

December 2009 - September 2012

Artificial Sniffer using linear ion trap mass spectroscopy (SNIFFLES).

EUROPEAN COMMISSION

January 2012 - July 2015

Development of porous structured surfaces for bone interlock.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

July 2003 - July 2004

Measuring and Reproducing the 3D Appearance of Human Facial Skin under varying Illumination Conditions.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2013 - April 2017

Manufacturing with Light - photochemical ALD to manufacture functional thin films

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

March 2014 - August 2015

Rapid manufacture of industrially relevant hierarchical structures.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

September 2003 - August 2006

Impact Acceleration Account - University of Liverpool 2012

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2012 - March 2017

Novel cellular structures for enhanced impact performance.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2005 - October 2008

High throughput selective laser melting of cellular components.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2005 - September 2010

Intermetallic component manufacture by cold gas dynamic manufacture (CGDM).

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

July 2003 - November 2006

Doctoral Training in Additive Manufacturing and 3D printing - Equipment.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

November 2014 - March 2015

Towards Sinter-free Printing of Photovoltaic Cell Interconnects.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2012 - September 2015

Anatomical models for calibration of blood velocity measurements made using Doppler ultrasound.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

October 2000 - December 2003

Sensor Fabrication and Deposition of Surface Coatings using Inkjet Technology

DEPARTMENT OF TRADE AND INDUSTRY (UK)

September 2007 - August 2010

Next Generation Heat Pipes for Thermal Management in Space

INNOVATE UK (UK)

May 2011 - August 2011

Micro laser cutting of thin sections: 4 month bridging award for GR/M11738/01.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

December 2001 - March 2002

Engineering functional materials for catalytic smart microreactors.

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

December 2006 - June 2010

Spiral Growth Manufacturing (SGM).

ENGINEERING & PHYSICAL SCIENCES RESEARCH COUNCIL

August 2003 - February 2007

Research Collaborations