2022
Oxley, J. A., Meyer, G., Cant, I., Bellantuono, G. M., Butcher, M., Levers, A., & Westgarth, C. (2022). A pilot study investigating human behaviour towards DAVE (Dog Assisted Virtual Environment) and interpretation of non-reactive and aggressive behaviours during a virtual reality exploration task.. PloS one, 17(9), e0274329. doi:10.1371/journal.pone.0274329DOI: 10.1371/journal.pone.0274329
Davies, S., Litskevich, D., Merk, B., Levers, A., Bryce, P., & Detkina, A. (2022). DYN3D and CTF Coupling within a Multiscale and Multiphysics Software Development (Part II). ENERGIES, 15(13). doi:10.3390/en15134843DOI: 10.3390/en15134843
Bowman, D., Dwyer, L., Levers, A., Patterson, E. A., Purdie, S., & Vikhorev, K. (2022). A Unified Approach to Digital Twin Architecture-Proof-of-Concept Activity in the Nuclear Sector. IEEE ACCESS, 10, 44691-44709. doi:10.1109/ACCESS.2022.3161626DOI: 10.1109/ACCESS.2022.3161626
2021
Davies, S., Litskevich, D., Rohde, U., Detkina, A., Merk, B., Bryce, P., . . . Ravindra, V. (2021). DYN3D and CTF Coupling within a Multiscale and Multiphysics Software Development (Part I). ENERGIES, 14(16). doi:10.3390/en14165060DOI: 10.3390/en14165060
Davies, S., Rohde, U., Litskevich, D., Merk, B., Bryce, P., Levers, A., . . . Ravindra, V. (2021). CTF and FLOCAL Thermal Hydraulics Validations and Verifications within a Multiscale and Multiphysics Software Development. ENERGIES, 14(5). doi:10.3390/en14051220DOI: 10.3390/en14051220
2018
MODELLING AND SIMULATION ACTIVITIES IN SUPPORT OF THE UK NUCLEAR R&D PROGRAMME ON DIGITAL REACTOR DESIGN (Conference Paper)
Lindley, B., Allen, D., Lillington, J., Smethurst, A., Smith, P., Bowman, D., . . . ASME. (2018). MODELLING AND SIMULATION ACTIVITIES IN SUPPORT OF THE UK NUCLEAR R&D PROGRAMME ON DIGITAL REACTOR DESIGN. In PROCEEDINGS OF THE 26TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2018, VOL 3. Retrieved from https://www.webofscience.com/
The UK nuclear R&D programme on digital nuclear reactor design - modelling, simulation, and virtual engineering (Conference Paper)
Merk, B., Allen, D., Bankhead, M., Bowen, A., Bowman, D., De Haas, S., . . . Vikhorev, K. (2018). The UK nuclear R&D programme on digital nuclear reactor design - modelling, simulation, and virtual engineering. In Proceedings of the 2018 International Congress on Advances in Nuclear Power Plants, ICAPP 2018 (pp. 1085-1090).
2015
Numerical and Experimental Investigation of Aircraft Panel Deformations During Riveting Process (Journal article)
Abdelal, G. F., Georgiou, G., Cooper, J., Robotham, A., Levers, A., & Lunt, P. (2015). Numerical and Experimental Investigation of Aircraft Panel Deformations During Riveting Process. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 137(1). doi:10.1115/1.4028923DOI: 10.1115/1.4028923
2014
Barriers to industrial energy efficiency (Journal article)
Lunt, P., Ball, P., & Levers, A. (2014). Barriers to industrial energy efficiency. International Journal of Energy Sector Management, 8(3), 380-394. doi:10.1108/ijesm-05-2013-0008DOI: 10.1108/ijesm-05-2013-0008
2013
Modeling and simulation of shot peening process (Conference Paper)
Zhang, X. J., Wang, J. B., Levers, A., & Hon, K. K. B. (2013). Modeling and simulation of shot peening process. In Proceedings of the 37th International MATADOR 2012 Conference (pp. 169-172).
Factory Modelling: Combining Energy Modelling for Buildings and Production Systems (Conference Paper)
Ball, P. D., Despeisse, M., Evans, S., Greenough, R. M., Hope, S. B., Kerrigan, R., . . . Wright, A. J. (2013). Factory Modelling: Combining Energy Modelling for Buildings and Production Systems. In ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: COMPETITIVE MANUFACTURING FOR INNOVATIVE PRODUCTS AND SERVICES, AMPS 2012, PT I Vol. 397 (pp. 158-165). Retrieved from https://www.webofscience.com/
2012
Industrial ecology at factory level: a prototype methodology (Journal article)
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012). Industrial ecology at factory level: a prototype methodology. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 226(A10), 1648-1664. doi:10.1177/0954405412449937DOI: 10.1177/0954405412449937
Industrial ecology at factory level - a conceptual model (Journal article)
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012). Industrial ecology at factory level - a conceptual model. JOURNAL OF CLEANER PRODUCTION, 31, 30-39. doi:10.1016/j.jclepro.2012.02.027DOI: 10.1016/j.jclepro.2012.02.027
The emergence of sustainable manufacturing practices (Journal article)
Despeisse, M., Mbaye, F., Ball, P. D., & Levers, A. (2012). The emergence of sustainable manufacturing practices. PRODUCTION PLANNING & CONTROL, 23(5), 354-376. doi:10.1080/09537287.2011.555425DOI: 10.1080/09537287.2011.555425
Potential applications of peen forming finite element modelling (Journal article)
Gariepy, A., Cyr, J., Levers, A., Perron, C., Bocher, P., & Levesque, M. (2012). Potential applications of peen forming finite element modelling. ADVANCES IN ENGINEERING SOFTWARE, 52, 60-71. doi:10.1016/j.advengsoft.2012.06.006DOI: 10.1016/j.advengsoft.2012.06.006
2011
Reducing Energy Use in Aircraft Component Manufacture - Applying Best Practice in Sustainable Manufacturing (Conference Paper)
Lunt, P., & Levers, A. (n.d.). Reducing Energy Use in Aircraft Component Manufacture - Applying Best Practice in Sustainable Manufacturing. In SAE Technical Paper Series. SAE International. doi:10.4271/2011-01-2739DOI: 10.4271/2011-01-2739
2009
Zero carbon manufacturing facility - towards integrating material, energy, and waste process flows (Journal article)
Ball, P. D., Evans, S., Levers, A., & Ellison, D. (2009). Zero carbon manufacturing facility - towards integrating material, energy, and waste process flows. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 223(9), 1085-1096. doi:10.1243/09544054JEM1357DOI: 10.1243/09544054JEM1357
2007
The effect of controlled shot peening on the fatigue behaviour of 2024-T3 aluminium friction stir welds (Journal article)
Ali, A., An, X., Rodopoulos, C. A., Brown, M. W., O'Hara, P., Levers, A., & Gardiner, S. (2007). The effect of controlled shot peening on the fatigue behaviour of 2024-T3 aluminium friction stir welds. INTERNATIONAL JOURNAL OF FATIGUE, 29(8), 1531-1545. doi:10.1016/j.ijfatigue.2006.10.032DOI: 10.1016/j.ijfatigue.2006.10.032
2006
A process model for shot peen forming (Journal article)
Wang, T., Platts, M. J., & Levers, A. (2006). A process model for shot peen forming. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 172(2), 159-162. doi:10.1016/j.jmatprotec.2005.09.006DOI: 10.1016/j.jmatprotec.2005.09.006
2003
A fatigue damage map for 2024-T3 aluminium alloy (Journal article)
Rodopoulos, C. A., de los Rios, E. R., Levers, A., & Yates, J. R. (2003). A fatigue damage map for 2024-T3 aluminium alloy. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 26(7), 569-575. doi:10.1046/j.1460-2695.2003.00526.xDOI: 10.1046/j.1460-2695.2003.00526.x
Jumbo processes (Journal article)
Levers, A. (2003). Jumbo processes. Manufacturing Engineer, 82(3), 42-45. doi:10.1049/me:20030317DOI: 10.1049/me:20030317
Predicting the interfaces between fatigue crack growth regimes in 7150-T651 aluminium alloy using the fatigue damage map (Journal article)
Curtis, S. A., Romero, J. S., de los Rios, E. R., Rodopoulos, C. A., & Levers, A. (2003). Predicting the interfaces between fatigue crack growth regimes in 7150-T651 aluminium alloy using the fatigue damage map. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 79-85. doi:10.1016/S0921-5093(02)00416-1DOI: 10.1016/S0921-5093(02)00416-1
2002
Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys (Journal article)
Curtis, S., de los Rios, E. R., Rodopoulos, C. A., & Levers, A. (2003). Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys. INTERNATIONAL JOURNAL OF FATIGUE, 25(1), 59-66. doi:10.1016/S0142-1123(02)00049-XDOI: 10.1016/S0142-1123(02)00049-X
Development of new damage tolerant alloys for age-forming (Conference Paper)
Starink, M. J., Sinclair, I., Gao, N., Kamp, N., Gregson, P. J., Pitcher, P. D., . . . Gardiner, S. (2002). Development of new damage tolerant alloys for age-forming. In ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3 Vol. 396-4 (pp. 601-606). doi:10.4028/www.scientific.net/MSF.396-402.601DOI: 10.4028/www.scientific.net/MSF.396-402.601
2001
Towards the optimisation of the shot peening process in terms of fatigue resistance of the 2024-T351 and 7150-T651 aluminium alloys (Conference Paper)
Romero, J. S., De los Rios, E. R., Levers, A., & Karuppanan, S. (2001). Towards the optimisation of the shot peening process in terms of fatigue resistance of the 2024-T351 and 7150-T651 aluminium alloys. In SURFACE TREATMENT V: COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS Vol. 6 (pp. 343-355). Retrieved from https://www.webofscience.com/
2000
Modelling fatigue crack growth in shot-peened components of Al 2024-T351 (Journal article)
De Los Rios, E. R., Trull, M., & Levers, A. (2000). Modelling fatigue crack growth in shot-peened components of Al 2024-T351. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 23(8), 709-716. doi:10.1046/j.1460-2695.2000.00287.xDOI: 10.1046/j.1460-2695.2000.00287.x
1998
Development of integrated decision support system for creep age forming (Conference Paper)
Levers, A., Tanner, A., Al-Khalil, M., Platts, M. J., SOC, R. A., & SOC, R. A. (1998). Development of integrated decision support system for creep age forming. In MULTIDISCIPLINARY DESIGN AND OPTIMISATION, PROCEEDINGS (pp. O1-O6). Retrieved from https://www.webofscience.com/
Finite element analysis of shot peening (Journal article)
Levers, A., & Prior, A. (1998). Finite element analysis of shot peening. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 80-1, 304-308. doi:10.1016/S0924-0136(98)00188-5DOI: 10.1016/S0924-0136(98)00188-5
