2023
Sidambe, A., Black, K., & Fox, P. (2023). Laser powder bed fusion of refractory metals. In 2023 RAPDASA-RobMech-PRASA-CoSAAMI Conference. Pretoria, South Africa.
2022
Melt pool analysis of laser powder bed fusion tungsten - Experimental and simulation (Conference Paper)
Sidambe, A., & Fox, P. (2022). Melt pool analysis of laser powder bed fusion tungsten - Experimental and simulation. In International Conference on Refractory Metals and Hard Materials Proceedings (pp. RM16). Reutte, Austria.
2020
Sidambe, A., & Fox, P. (2020). Analysis of melt pool during the laser powder bed fusion of tungsten. In RAPDASA 2019 Conference and Exhibition. Bloemfontein, South Africa.
2019
Sidambe, A. T., Judson, D. S., Colosimo, S. J., & Fox, P. (2019). Laser powder bed fusion of a pure tungsten ultra-fine single pinhole collimator for use in gamma ray detector characterisation. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 84. doi:10.1016/j.ijrmhm.2019.104998DOI: 10.1016/j.ijrmhm.2019.104998
Sidambe, A. T., Tian, Y., Prangnell, P. B., & Fox, P. (2019). Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 78, 254-263. doi:10.1016/j.ijrmhm.2018.10.004DOI: 10.1016/j.ijrmhm.2018.10.004
2018
Sidambe, A. T. (2018). Effects of build orientation on 3D-printed Co-Cr-Mo: surface topography and L929 fibroblast cellular response. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 99(1-4), 867-880. doi:10.1007/s00170-018-2473-0DOI: 10.1007/s00170-018-2473-0
2017
Sidambe, A. T., & Fox, P. (2017). Investigation of the Selective Laser Melting process with tungsten metal powder. In 19th Plansee Seminar. Reutte, Austria. Retrieved from https://www.liverpool.ac.uk/engineering/staff/alfred-sidambe/
Selective laser melting-enabled electrospinning: Introducing complexity within electrospun membranes (Journal article)
Paterson, T. E., Beal, S. N., Santocildes-Romero, M. E., Sidambe, A. T., Hatton, P. V., & Asencio, I. O. (2017). Selective laser melting-enabled electrospinning: Introducing complexity within electrospun membranes. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 231(6), 565-574. doi:10.1177/0954411917690182DOI: 10.1177/0954411917690182
Sidambe, A. T. (2017). Three dimensional surface topography characterization of the electron beam melted Ti6Al4V. Metal Powder Report, 72(3), 200-205. doi:10.1016/j.mprp.2017.02.003DOI: 10.1016/j.mprp.2017.02.003
Sidambe, A. T., & Fox, P. (2017). Interaction of pure tungsten powder with processing conditions in selective laser melting. In Advances in Powder Metallurgy and Particulate Materials 2017 - Proceedings of the 2017 International Conference on Powder Metallurgy and Particulate Materials Vol. 2017-June (pp. 701-711).
2016
Effects of build orientation induced surface modifications on the <i>in vitro</i> biocompatibility of electron beam melted Ti6Al4V (Journal article)
Sidambe, A. T., Todd, I., & Hatton, P. V. (2016). Effects of build orientation induced surface modifications on the <i>in vitro</i> biocompatibility of electron beam melted Ti6Al4V. POWDER METALLURGY, 59(1), 57-65. doi:10.1080/00325899.2016.1153278DOI: 10.1080/00325899.2016.1153278
2015
Effect of Processing Parameters on the Properties of Metal Injection Moulded Titanium Dental Implants (Journal article)
Sidambe, A. T., Todd, I., & Hatton, P. (n.d.). Effect of Processing Parameters on the Properties of Metal Injection Moulded Titanium Dental Implants. Materials Science Forum, 828-829, 145-151. doi:10.4028/www.scientific.net/msf.828-829.145DOI: 10.4028/www.scientific.net/msf.828-829.145
Sidambe, A. T., Todd, I., & Hatton, P. V. (2015). Effects of build orientationinduced surface modifications on thein-vitro biocompatibility of electron beam melted Ti-6Al-4V. In Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition.
2014
Biocompatibility of Advanced Manufactured Titanium Implants-A Review (Journal article)
Sidambe, A. T. (2014). Biocompatibility of Advanced Manufactured Titanium Implants-A Review. MATERIALS, 7(12), 8168-8188. doi:10.3390/ma7128168DOI: 10.3390/ma7128168
2013
Influence of processing on the properties of IN718 parts produced via Metal Injection Moulding (Journal article)
Sidambe, A., Derguti, F., Russell, A. D., & Todd, I. (2013). Influence of processing on the properties of IN718 parts produced via Metal Injection Moulding. Powder Injection Moulding International, 7(4), 65-69.
Correlation of metal injection moulded Ti6Al4V yield strength with resonance frequency (PCRT) measurements (Journal article)
Sidambe, A. T., Choong, W. L., Hamilton, H. G. C., & Todd, I. (2013). Correlation of metal injection moulded Ti6Al4V yield strength with resonance frequency (PCRT) measurements. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 568, 220-227. doi:10.1016/j.msea.2013.01.040DOI: 10.1016/j.msea.2013.01.040
6 Developments in metal injection moulding (MIM) (Chapter)
Todd, I., & Sidambe, A. T. (2013). 6 Developments in metal injection moulding (MIM). In Advances in Powder Metallurgy (pp. 109-146). Elsevier. doi:10.1533/9780857098900.1.109DOI: 10.1533/9780857098900.1.109
Characteristics of IN718 parts produced by metal injection moulding (Conference Paper)
Sidambe, A. T., Derguti, F., Russell, A. D., & Todd, I. (2013). Characteristics of IN718 parts produced by metal injection moulding. In International Powder Metallurgy Congress and Exhibition, Euro PM 2013.
Developments in metal injection moulding (MIM) (Chapter)
Todd, I., & Sidambe, A. T. (2013). Developments in metal injection moulding (MIM). In ADVANCES IN POWDER METALLURGY: PROPERTIES, PROCESSING AND APPLICATONS (pp. 109-146). doi:10.1533/9780857098900.1.109DOI: 10.1533/9780857098900.1.109
2012
Metal injection moulding of CP-Ti components for biomedical applications (Journal article)
Sidambe, A. T., Figueroa, I. A., Hamilton, H. G. C., & Todd, I. (2012). Metal injection moulding of CP-Ti components for biomedical applications. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 212(7), 1591-1597. doi:10.1016/j.jmatprotec.2012.03.001DOI: 10.1016/j.jmatprotec.2012.03.001
Metal Injection Moulding of Low Interstitial Titanium (Journal article)
Sidambe, A. T., Derguti, F., & Todd, I. (2012). Metal Injection Moulding of Low Interstitial Titanium. POWDER METALLURGY OF TITANIUM: POWDER PROCESSING, CONSOLIDATION AND METALLURGY OF TITANIUM, 520, 145-152. doi:10.4028/www.scientific.net/KEM.520.145DOI: 10.4028/www.scientific.net/KEM.520.145
Microstructure of metal injection moulded Ti-6Al-4V after thermo-chemical treatment (Conference Paper)
Sidambe, A. T., Derguti, F., & Todd, I. (2012). Microstructure of metal injection moulded Ti-6Al-4V after thermo-chemical treatment. In Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012 Vol. 3.
Sinter joining of metal injection moulded superalloy components (Conference Paper)
Derguti, F., Jiranek, L., Latham, D., Sidambe, A., & Todd, I. (2012). Sinter joining of metal injection moulded superalloy components. In Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012 Vol. 3.
2011
Sidambe, A. T., Figueroa, I. A., Hamilton, H., & Todd, I. (2011). Improved Processing of Titanium Alloys by Metal Injection Moulding. In TRENDS IN AEROSPACE MANUFACTURING 2009 INTERNATIONAL CONFERENCE Vol. 26. doi:10.1088/1757-899X/26/1/012005DOI: 10.1088/1757-899X/26/1/012005
TAGUCHI OPTIMIZATION OF MIM TITANIUM SINTERING (Journal article)
Sidambe, A. T., Figueroa, I. A., Hamilton, H. G. C., & Todd, I. (2011). TAGUCHI OPTIMIZATION OF MIM TITANIUM SINTERING. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 47(6), 21-28. Retrieved from https://www.webofscience.com/
Fatigue behaviour of Ti6Al4V and CPTi components processed by metal injection moulding (Conference Paper)
Sidambe, A. T., Derguti, F., & Todd, I. (2011). Fatigue behaviour of Ti6Al4V and CPTi components processed by metal injection moulding. In Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011 Vol. 2.
2010
Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system (Conference Paper)
Ismail, M. H., Sidambe, A. T., Figueroa, I. A., Davies, H. A., & Todd, I. (2010). Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system. In Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010 Vol. 4.
Metal injection moulding of Ti-64 components using a water soluble binder (Journal article)
Sidambe, A., Figueroa, I. A., Hamilton, H. G. C., & Todd, I. (2010). Metal injection moulding of Ti-64 components using a water soluble binder. PIM International, 4, 56-62.
2009
Effects of boron addition on microstructure and mechanical properties of Ti-6Al-4V metal injection moulding components using a water soluble binder (Conference Paper)
Sidambe, A. T., Figueroa, I. A., Ismail, M. H., Hamilton, H., & Todd, I. (2009). Effects of boron addition on microstructure and mechanical properties of Ti-6Al-4V metal injection moulding components using a water soluble binder. In Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2009 Vol. 2.
Sintering study of CP-Ti and Ti6V4AL metal injection moulding parts using Taguchi method (Conference Paper)
Sidambe, A. T., Figueroa, I. A., Hamilton, H., & Todd, I. (2009). Sintering study of CP-Ti and Ti6V4AL metal injection moulding parts using Taguchi method. In Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2009 Vol. 2.
2008
Rapid debinding of a titanium injection molded component (Conference Paper)
Sidambe, A. T., Xu, W., Todd, I., Figueroa, I. A., & Hamilton, H. (2008). Rapid debinding of a titanium injection molded component. In Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008 Vol. 2 (pp. 275-280).